3.5" SBC with NXP i.MX8 Applications Processors

Product status

Available in Industrial Temperature Range

Contact us for more information and quotes


NXP i.MX 8 Family


2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit/XVSX (QuadPlus and Quad)


2x Gigabit Ethernet interfaces


Soldered down LPDDR4

Product details

Technical Info

  • Description
    3.5" SBC Industrial ARM solution for IoT edge computing applications
  • Processor

    NXP i.MX 8 Family:
    i.MX 8QuadMax: 2x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F
    i.MX 8QuadPlus: 1x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F
    i.MX 8Quad: 4x ARM® Cortex®-A53 + 2x Cortex®-M4F

  • Max Cores
  • Memory

    Soldered down LPDDR4 memory, 64-bit interface, 1600MHz.
    Base configuration 2GB, up-scalable to 4GB, 6GB, 8GB

  • Graphics

    2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit / XVSX (QuadPlus and Quad)
    1x embedded VPU, supporting H.265 (4K30) and H.264 (1080p60) decoding and H.264 (1080p30) encoding
    Supports 4 independent video outputs (total combined resolution 4K)

  • Video Interfaces

    HDMI 2.0a Tx interface
    Optional eDP 1.4 interface
    Single/Dual-Channel 18-/24- bit LVDS interface

    HDMI 2.0a Rx interface
    2x 4-lanes MIPI-CSI Camera interfaces

  • Video Resolution

    HDMI: Up to UltraHD (4K)
    LVDS, eDP: up to 1080p

  • Mass Storage

    eMMC 5.1 Drive soldered on-board, up to 32GB
    1x S-ATA interface available on M.2 Socket 2 Key B Slot (interface shared with PCI-e x1)
    microSD Card Slot
    4MB QuadSPI Flash NAND (boot device only)

  • Networking

    2x Gigabit Ethernet interfaces
    Combo WiFi 802.11 a/b/g/n/ac + BT LE 4.2 module with ceramic SMT antennas on-board
    M.2 Socket 2 Key B Slot for M.2 Modems
    M.2 Socket1 Key E Slot for WiFi + BT external modules

  • USB

    1 x USB 3.0 Host port on Type-A socket
    1x USB 2.0 OTG port on micro-AB socket
    1x USB 2.0 Host port on external Type-A socket
    1x USB 2.0 Host port on internal connector
    2 x USB 2.0 ports available on M.2 Key B and Key E slots

  • Audio

    I2S Audio Codec
    Mic In and Line Out interfaces, available on a single combo TRRS connector

  • Serial Ports

    1x UART (RS-232 level)
    1x UART RS-485/RS-422 configurable
    1x UART TTL level
    3x CAN interfaces

  • Other Interfaces

    4x Analog Inputs
    6x GPIOs
    SPI interface
    I2C interface
    Embedded additional RTC circuitry for lowest power consumption
    SIM dedicated slot + programmable electronic SIM on-board

  • Power Supply

    +12VDC ± 10%

  • Operating System

    Wind River Linux

  • Operating Temperature

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C  (Industrial version)


    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

  • Dimensions
    146 x 102 mm (5,75” x 4,02”)


Part Number

  • The ordering code for samples will be available soon.

    Part number description
    If you are interested in this product please contact us
    Contact us for more informations or quotes

Related Products

SBC-C43 Heat Spreader (PASSIVE)
View Product