SMARC DEV KIT

SMARC 2.0 Development Kit

Product status

Development
Sampling
Production

Contact us for more information and quotes

Product details

Technical Info

  • Description
    The Development Kit contains the following material: - CSM-B79 Carrier Board - Feature connector adapter cable (Free wires on one extremity) - Serial Adapter Cables - Optional Display Kit (eDP or LVDS) - 1x SATA power cable - Main power Adapter cable - 1x certified High Speed DP cable, DP1.4 standard compliant - 1x certified High Speed HDMI cable, HDMI 2.0 compliant - DP-to-HDMI adapter Module not included. Must be purchased separately
  • Video Interfaces

    LVDS connector, interface shared with 2 x eDP/DSI connectors
    Backlight control + LCD selectable voltages dedicated connector
    DP++ dedicated connector
    HDMI connector (interface shared with USB 3.1 Type-C alternate mode port)
    2x CSI Camera input interfaces

  • Mass Storage

    SATA M 7p connector with dedicated power connector,
    interface shared with M.2 Socket 2 2242 / 2260 Key B SSD slot
    microSD Card Slot

  • Networking

    2 x RJ-45 Gigabit Ethernet connectors
    M.2 Socket1 2230 Key E Slot for WiFi Modules (interface shared with PCI-e x 4 slot)
    M.2 Socket2 2260 Key E Slot for WWAN Modem Modules (interface shared with PCI-e x 4 slot), connected to on-board microSIM slot

  • USB

    1 x USB 3.0 type A Socket
    1 x USB 2.0 type A Socket
    1 x USB OTG micro-AB Socket
    1 x USB 3.1 Type-C Socket, with Alternate Mode and Power Delivery functionality

  • PCI-e

    PCI-e x4 slot, interface shared with 2 x PCI-e x1 Slot and M.2 Slots

  • Audio

    Mic In Jack, Line Out Jack
    Onboard I2S Audio Codec (TI TLV320AIC3204) + HD Audio
    Codec (Cirrus Logic CS4207)

  • Serial Ports

    2 x CAN ports
    2 x RS-232/RS-422/RS-485 configurable serial ports on internal pin header
    2 x Serial ports (Tx/Rx signals only, TTL level) on feature pin header

  • Other Interfaces

    eSPI pin header + Flash Socket
    SPI pin header + Flash Socket
    I2C EEPROM Socket
    4 x 7-segment LCD displays for POST codes
    Feature pin header with 8x GPIOs, I2C, SM Bus, Watchdog and Power Management Signals
    4x GPIOs dedicated connector
    FAN connector
    RTC Coin cell battery holder
    Optional Debug USB port on mini-B Socket
    Boot selection switches
    JTAG connector

  • Power Supply

    9-21V through dedicated Mini-Fit Jr 2x2 power connector or USB Type-C connector
    6-17V through 2/3/4 Cell Smart Battery Connector

  • Operating Temperature

    -40°C ÷ +85°C (industrial range)

     

    *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.

  • Dimensions
    243.84 x 243.84mm (microATX)

Part Number

  • The ordering code for samples will be available soon.

    Part number description
    If you are interested in this product please contact us
    Contact us for more informations or quotes
    CONTACT US

Related Products

SM-B69
SMARC® Rel. 2.1 compliant module with the Intel® Atom™ X Series, Intel® Celeron® J / N Series and Intel® Pentium® N Series (formerly Apollo Lake) Processors
Sampling
View Product
SM-C12
SMARC Rel. 2.1 compliant module with NXP i.MX 8M Applications Processors
Production
View Product
SM-B71
SMARC Rel. 2.0 compliant module with the Xilinx® Zynq® Ultrascale+™ MPSoC
Production
View Product