SBC-C23

Smart Edge Compute Unit based on NXP i.MX 6SoloX Processor

Product status

Development
Sampling
Production

Contact us for more information and quotes

CPU

NXP i.MX6SX SoloX

Graphics

Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator

Connectivity

2x Fast Eth; WiFi; BLE; 3x Multicolor Signalling LEDs; 1x RS-232 port; 1x RS-485 port; 2x CAN port

Memory

32-bit DDR3L memory soldered onboard

Product details

Technical Info

  • Description
    The SBC-C23 is a Smart Edge Compute Unit, built on NXP i. MX 6SoloX Processor, enables multi core edge computing and networking, while ensuring wide connectivity. As far as memory is concerned, the device features a 32-bit DDR3L memory soldered on-board, up to 1 GB. When it comes to interfaces the board is plentiful: networking interfaces - such as 2x Fast Ethernet RJ-45 ports, Wifi, BT LE combo module with on-board antenna - but also other interfaces like 2x CAN port, 4x analog inputs, I2C, 2x PWM and many others. The device is indeed a multiprotocol bridging for industrial PLCs and smart factory devices. Fields of application include Home Automation, Industrial Internet of Things and Surveillance among the many.
  • Processor

    NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

  • Memory

    32-bit DDR3L memory soldered onboard, up to 1GB

  • Graphics

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

  • Video Interfaces

    Optional Single Channel 18- / 24- bit LVDS connector w/ Touch Screen (I2C signals)
    Max resolution 1366x768 @60 Hz, 24bpp

  • Mass Storage

    8GB eMMC drive on-board
    μSD Card slot
    1MB SPI Flash

  • Networking

    Up to 2x FastEthernet RJ-45 ports
    Optional Single Band or Dual Band WiFi (802.11 b/g/n) + BT LE combo module with on-board PCB antennas or u/FL connectors, factory alternatives
    Optional LTE-Cat4 Modem with integrated GNSS, with up to 3 external antennas

  • USB

    1 x USB 2.0 Type-A socket
    1 x USB 2.0 OTG on micro-AB connector

  • Audio

    On-board buzzer

  • Serial Ports

    All available on expansion connector:
    - 1 x RS-232 port
    - 1x RS-485 port
    - 2 x CAN port

  • Other Interfaces

    M.2 Socket 1 Key E 2230 (USB + PCI-e x1 interfaces) Slot
    M.2 Socket 2 Key B 2242 (USB interface) Slot
    microSIM slot or electronic SIM soldered on-board for the optional Modem and/or the M.2 Key B Slot
    3x Multicolor signalling LEDs
    Reset Button
    Expansion PCB terminal block with:
    -4x analog inputs
    -I2C
    2x PWM

  • Power Supply

    +12VDC
    DC power jack and 2-poles PCB terminal block for voltage supply
    Optional Li-Ion Rechargeable battery

  • Operating System

    Wind River Linux

  • Operating Temperature

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C  (Industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

  • Dimensions
    153 x 89,5 mm (6” x 3,5”)

Part Number

  • The ordering code for samples will be available soon.

    Part number description
    If you are interested in this product please contact us
    Contact us for more informations or quotes
    CONTACT US