SYS-B08-7

Embedded Panel with 7” LCD display based on the NXP i.MX 6SoloX Processor

Product status

Development
Sampling
Production

Contact us for more information and quotes

CPU

NXP i.MX 6SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

Graphics

Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator

Connectivity

up to 2x Fast Eth; optional WiFi + BT LE

Memory

32-bit DDR3L memory soldered on-board, up to 1GB

Product details

Technical Info

  • Description
    The SYS-B08-7 is an Embedded Panel with 7” LCD display based on the NXP i.MX 6SoloX Processor. This smart, compact, industrial touch system features a 7” capacitive full-flat multi-touch screen, perfect for IoT. Thanks to the lightweight and easy installation with integrated HW accelerator, this solution is suitable for 24-hr digital signage usage. The SYS-B08-7 low power consumption and fanless system is connectivity-oriented and has Linux ready for quick system deployment. It is ideal for Industrial Automation, Industrial Internet of Things (IIoT), Digital Signage and HMI applications.
  • Processor

    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
     

  • Max Cores
    1+1
  • Memory

    Soldered on-board DDR3L memory, 32-bit interface
    SYS-B08-BASIC/D: 512MB
    SYS-B08-FULL/D: 1GB

  • Graphics

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

  • Video Interfaces

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

  • Video Resolution

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

  • Mass Storage

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

  • Networking

    SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector
    SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard

  • USB

    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header

  • Audio

    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header

  • Serial Ports

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

  • Other Interfaces

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

  • Power Supply

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

  • Operating System

    Linux
    Yocto

  • Operating Temperature

    0°C ÷ +60°C (Commercial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

  • Dimensions
    189.60 x 121.40 x 28.20 mm

Software

Part Number

  • SYS-B08-7/BD

    Part number description
    SYS-B08-7, Basic version: 7" touch display, NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 512MB RAM - 1x FastETH - RTC LP - RS-485 - RS-232 - CAN - Comm. Temp. w/Heatsink
    Contact us for more informations or quotes
    CONTACT US
  • SYS-B08-7/FD

    Part number description
    SYS-B08-7 Full Version: 7" touch display, NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 1GB RAM - 8GB eMMC - 2x FastETH - Wi-Fi/BLE - RTC LP - RS-485 - RS-232 - CAN - Comm. Temp. w/ Heatsink
    Contact us for more informations or quotes
    CONTACT US

Related Products

PWK-003
Power supply kit: Power brick (EA1050A(M03) 60W, 12V 5A) + Power cord (CV-AL006) + adapters (EU;US;JPN etc.)
Production
View Product
CABKITA62-DEBUG
Debug kit complete of M863 transceiver module
Production
View Product