Carrier-COMe-T6-C30

Name: Carrier-COMe-T6-C30
Price: 377.8 EUR
Availability: OutOfStock

Carrier Board for COM Express™ Type 6 Modules on 3.5” form factor

Data sheet

Wiki

Contattaci per maggiori informazioni e per preventivi

Contattaci

Dettagli Prodotto

Informazioni tecniche

Descrizione	The Carrier-COMe-T6-C30 is a full-featured Carrier Board for COM-Express™ Type 6 Modules on 3.5” form factor. Specifically designed for digital signage, but also highly versatile; it is an extremely compact and I/O rich solution, offering a wide range of connectivity possibilities, excellent for multi-display applications.
Interfacce video	1 x DP++ connector 2 x miniDP++ connectors LVDS 24-bit Single/Dual Channel LVDS External EDID flash socket eDP 4-lanes 40 poles VESA connector
Memoria di massa	S-ATA 7p M connector + 4 pins power connector M.2 Socket 2 2260 Key B slot for SSD M.2 Socket 3 2280 Key M slot for PCI-e x4 SSDs μSD Card slot (interface multiplexed with GPIO header)
Rete	Dual RJ-45 connector (1 port managed by COM Express Gigabit Ethernet interface, 1 port managed by Carrier board’s Intel® I21x GbEthernet controller) M.2 Socket 2 2242 / 3042 Key B slot for WWAN modules (modem) M.2 Socket 1 2230 Key E slot for WiFi / BT modules
USB	3 x USB 3.0 Host ports on Type-A sockets 2 x USB 2.0 Host ports on Type-A sockets 1 x USB 2.0 Host port on internal pin header
Audio	On-board HD Audio Codec (Realtek ALC262) Mic In + Line Out internal pin header
Porte seriali	2 x RS-232 / RS-422 / RS-485 ports on internal pin header (from carrier board’s SuperI/O) 2 x RS-232 ports on feature pin header (from module)
Altre interfacce	microSIM slot for M.2 modem 4 x GPI + 4 x GPO pin header (interface multiplexed with μSD slot) Button / LEDs front panel header 3-pin tachometric FAN connector I2C + SM Bus on feature Pin header LPC internal header
Dispositivo di alimentazione	19÷24 VDC fixed (only CPU modules with max 45W TDP supported) Mega-Fit® 2x1 Power Connector Cabled Coin-cell connector for RTC
Temperatura operativa	0°C ÷ +50°C *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensioni	146x102mm (3.5” form factor, 5.75” x 4.02”)

Software

Link	SECO Technical Resources

Documentazione

Data Sheet	[Datasheet] Carrier-COMe-T6-C30 Rel 1.5
Image	[Picture] CCOMe-C30_front [Picture] CCOMe-C30_persp
Manual	[Manual] CCOMe-C30 Rel 1.4

Part Number

Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.

Elementi prodotti raggruppati
MC30-0000-0000-C3 377,80 €	Descrizione Part Number Evaluation Carrier Board for COM Express™ Type 6 Modules on 3.5” form factor	Contattaci