SBC with NXP i.MX 6SoloX Processor

Product status

Available in Industrial Temperature Range

Contact us for more information and quotes


NXP i.MX 6SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz


Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator


up to 2x Fast Eth; optional WiFi + BT LE


32-bit DDR3L memory soldered on-board, up to 1GB

Product details

Technical Info

  • Description
    SBC-B08 is a new-generation all-in-one low-cost computer designed by SECO, equipped with a NXP i.MX 6SoloX applications processor able to run Linux. SBC-B08 is a revolutionary product in terms of connectivity, interactivity with the real world and cost: a new concept of single board computer ready for Internet of Things applications and for the Post-PC era.
  • Processor

    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

  • Max Cores
    1 + 1
  • Memory

    Soldered on-board DDR3L memory, 32-bit interface,  up to 1GB

  • Graphics

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

  • Video Interfaces

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

  • Video Resolution

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

  • Mass Storage

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    Optional eMMC drive soldered on-board, up to 8GB

  • Networking

    Up to 2x Fast Ethernet RJ-45 connectors
    Optional WiFi (802.11 b/g/n) + BT LE combo module + antenna onboard

  • USB

    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header

  • Audio

    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header

  • Serial Ports

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

  • Other Interfaces

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

  • Power Supply

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

  • Operating System


  • Operating Temperature

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (industrial version)


    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

  • Dimensions
    89.5 x 87 mm (3.52” x 3.43”)


Part Number

  • SB08-1222-2312-C1

    Part number description
    SBC-B08 w/ NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 1GB RAM - 8GB eMMC - 2x FastETH-Wi-Fi/BLE - RTC LP - RS-485 - RS-232 - CAN - Comm. Temp.
    Contact us for more informations or quotes

Related Products

Debug kit complete of M863 transceiver module
View Product
Power supply kit: Power brick (EA1050A(M03) 60W, 12V 5A) + Power cord (CV-AL006) + adapters (EU;US;JPN etc.)
View Product