Inicio
DEV-KIT-Q7-2.0

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

DEV-KIT-Q7-2.0

Name: DEV-KIT-Q7-2.0
Price: 437.95 EUR
Availability: OutOfStock

Cross Platform Starter Kit compatible with both x86 and Arm Rev. 2.0 Qseven® modules: a complete package including the basic components necessary to start developing. (Formerly Q7 DEV KIT 2.0)

Ficha de datos

Wiki

Para más información y recibir una cotización, póngase en contacto con nosotros

Contactarnos

Datos del producto

Información técnica

Descripción	The Starter Kit contains: • Carrier board for Qseven® Rev. 2.0 compliant modules CQ7-A42(DP or HDMI® version) • HD Audio module • I2S Audio module • One 12VDC Notebook Power Adapter • Cable kit • Adapter for mounting a microQ7 module on standard Qseven carrier boards Qseven® module not included. Must be purchased separately
Interfaces vídeos	LVDS Dual Channel 24-bit + backlight connectors or 2 x eDP connectors Multimode Display Port or HDMI® Connector
Almacenamiento en masa	1 x S-ATA connector with HDD Power connector 1 x mSATA Slot microSD Slot on combo microSD + SIM connector
Trabajo en red	Up to 2 x Gigabit Ethernet connectors
Usb	1 x USB 3.0 Host port on type-A socket 2 x USB 2.0 Host ports on double Type-A sockets 2 x USB 2.0 Host ports on internal pin header 1 x USB 2.0 OTG port on micro-AB socket (USB port shared with miniPCI-e slot)
Pci	miniPCI-e slot Full / Half size, combined with SIM card slot
Audio	Audio interface on internal pin header
Puertos de serie	4-wires RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector 2 x RS-232 Full-modem serial ports on internal header (needs LPC interface from Qseven® module) CAN interface on PCB terminal block
Otras interfaces	SPI internal pin header LPC Bus internal pin header SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header Front Panel Header 1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management) +12V Tachometric FAN connector Optional Debug USB port on miniB socket Optional MFG connector for JTAG programming of Qseven® module
Alimentación eléctrica	+12VDC Mini-fit Standard ATX power connector Coin cell battery Holder for CMOS and RTC
Temperatura de funcionamiento	-40°C ÷ +85 °C (industrial range) *All carrier board components must remain within the operating temperature at any and all times, including startup; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensiones	146 x 102 mm (5,75” x 4,02”)

Software

Enlace	SECO Technical Resources

Documentación

Data Sheet	[Datasheet] Q7 STARTER KIT 2.0 Rel 2.4
Image	[Image] Q7 STARTER KIT 2.0
Manual	[Schematics] Q7 STARTER KIT 2.0 [Manual] Q7 STARTER KIT 2.0

Part Number

Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.

Elementos de artículos agrupados
QA42-Q7XSK-2200 437,95 €	Descripción número de pieza Q7 Starter Kit 2.0 - HDMI - LVDS, no display included	Contactarnos

¿No encontró la solución que buscaba?

¿El producto estándar no satisface sus necesidades? SECO puede colaborar para desarrollar juntos una solución de software y un hardware personalizado total o parcialmente.

Para saber más