Carrier-Q7-D59

Name: Carrier-Q7-D59
Price: 147.99 EUR
Availability: OutOfStock

Carrier Board for Qseven® Rel. 2.0 / 2.1 Compliant Modules in the 3.5” Form Factor . (Formerly CQ7-D59 ). (Formerly CQ7-D59 )

Available in Industrial Temperature Range

Ficha de datos

Para más información y recibir una cotización, póngase en contacto con nosotros

Contactarnos

Datos del producto

Información técnica

Descripción	Carrier Board for Qseven® Rel. 2.0 / 2.1 Compliant Modules in the 3.5” Form Factor
Interfaces vídeos	LVDS Single/Dual Channel 18-24-bit + HDMI® connector or 2 x eDP connectors + Multimode Display Port
Almacenamiento en masa	1 x SATA connector with HDD Power connector 1 x M.2 Socket 2 2242 Key B SSD Slot microSD Slot on combo microSD + SIM connector
Trabajo en red	Up to 2 x Gigabit Ethernet connectors 1 x M.2 Socket 2 2242/3042 Key B Slot for WWAN Modem Modules, connected to on-board miniSIM slot
Usb	2 x Superspeed USB 5Gbp Host port on Dual Type-A socket 1 x USB 2.0 Host ports on double Type-A sockets 1 x USB 2.0 Host on internal M.2 Socket 1 x USB 2.0 OTG port on micro-AB socket (USB port shared with USB 2.0 lanes of 1 x USB 3.0)
Audio	Audio interface on internal pin header
Puertos de serie	4-wire RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector 2 x RS-232 Full-modem serial ports on internal header (need LPC interface from Qseven® module) CAN interface on PCB terminal block
Otras interfaces	SPI internal pin header LPC Bus internal pin header SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header Front Panel Header 1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management) +12V Tachometric FAN connector Optional Debug USB port on miniB socket Optional MFG connector for JTAG programming of Qseven® module
Alimentación eléctrica	24VDC ±5% through Micro-fit 2x2 power connector Coin cell battery Holder for CMOS and RTC
Temperatura de funcionamiento	-40°C ÷ +85°C (Industrial temperature range) *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensiones	146 x 102 mm (5.75” x 4.02”)

Documentación

Data Sheet	[Datasheet] Carrier-Q7-D59 Rel 1.0
Manual	[Manual] CQ7-D59 Rel 1.1
Image	[Picture] CQ7-D59_front [Picture] CQ7-D59_persp

Part Number

Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.

Elementos de artículos agrupados
QD59-0001-1121-I2	Descripción número de pieza 3.5” Qseven 2.1 Carrier board for Q7 modules with DP++ & eDP display interfaces, 2x GbE	Contactarnos
QD59-0001-2111-I2	Descripción número de pieza 3.5” Qseven 2.1 Carrier board for Q7 modules with HDMI & LVDS interfaces, 2x GbE	Contactarnos

¿No encontró la solución que buscaba?

¿El producto estándar no satisface sus necesidades? SECO puede colaborar para desarrollar juntos una solución de software y un hardware personalizado total o parcialmente.

Para saber más