The boxed solution B901 supports the CQ7-901 carrier board on Pico-ITX Form Factor and the following module: • Q7-928

Status prodotto


Contattaci per maggiori informazioni o quotazioni


supports Qseven® standard module with NXP i.MX6 Processor Q7-928


2D/3D dedicated graphics processors (Q7-928)


1 x Gigabit / FastEthernet connector 1 x optional additional FastEthernet port


up to 4GB DDR3L on-board (Q7-928)

Dettaglio prodotto

Caratteristiche tecniche

  • Description
    The B901 is composed by: • Upper and lower Housing case • Front and back panel (both for dual USB and for Dual Ethernet versions) • Screws kits • Assembly blocks for: - Q7-928 • Assembly manual AVAILABLE FOR: Q7-928 CQ/-901
  • Video Interfaces

    LVDS Interface, 34 pin 2mm pin header
    Backlight Connector, 6 pin, 2mm Pin Header
    HDMI Connector

  • Mass Storage

    1 x SATA connector
    μSD Card Slot

  • USB

    Up to 7 x USB 1.1 / 2.0 ports (1 x USB client)


  • PCI-e

    1 x miniPCI Express slot


  • Audio

    AC’97 and HD Audio Codec**, jumper selectable
    Line In, Mic In on internal pin headers
    Earphone pin header
    ** available only on Industrial version

  • Serial Ports

    1 x RS-232 (RS-422 / RS-485 configurable)
    1 x TTL-level serial port
    CAN Interface

  • Other Interfaces

    8 x GPIO on 10-Pin Header Connector
    4-Wire Touch Screen controller integrated
    SM Bus Pin Header
    I2C Bus, SPI interface
    SIM Card slot for miniPCI Express modems
    Internal Pin Header for Power, Lid, Sleep and Reset Button

  • Power Supply

    On-board rechargeable Lithium Battery for CMOS Backup
    and RTC
    12V Power jack
    Power On Status LED

  • Operating Temperature

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C (Industrial version)

  • Dimensions
    100 x 72 mm (3.94” x 2.83”)