DEV-KIT-COMe-T6

Name: DEV-KIT-COMe-T6
Price: 948.75 EUR
Availability: OutOfStock

Cross Platform Development Kit compatible with both x86 and Arm COM Express® Type 6 modules

Ficha de datos

Wiki

Para más información y recibir una cotización, póngase en contacto con nosotros

Contactarnos

Datos del producto

Información técnica

Descripción	The Development Kit contains the following material: - CCOMe-C96 Carrier Board - GPIO Header adapter cable (Free wires on one extremity) - 2x Serial Adapter Cables - 1x certified High Speed DP cable 1m - DP-to-HDMI adapter - 1x SATA cable - HDMI cable - eDP cable - Front Panel module V995 with connecting cables Module not included. Must be purchased separately
Interfaces vídeos	3 x DP++ connector VGA connector LVDS 24-bit Single/ Dual Channel eDP 4-lanes 40 poles VESA connector LVDS External EDID flash socket
Almacenamiento en masa	4 x SATA 7p M connectors μSD Card slot (interface multiplexed with GPIO header)
Trabajo en red	1x GbEthernet RJ-45 connector
Usb	4x USB 3.1 Host ports on Type-A sockets 4 x USB 2.0 Host ports on Quad Type-A sockets
Pci	2x PCI-e x4 Slots 1x PCI-e x16 Slot
Audio	On-board HD Audio Codec (Realtek ALC888S) HD Audio Jacks S/PDIF Out Optical connector Mic In + Line Out internal pin header
Puertos de serie	2 x RS-232 / RS-422 / RS-485 ports on internal pin header (from carrier board’s LPC Dual UART controller) 2 x RS-232 ports on dedicated pin header (from module)
Otras interfaces	4 x GPI + 4 x GPO pin header (interface multiplexed with µSD slot) SPI Flash header Button / LEDs front panel header 4-pin tachometric FAN connector I2C + SM Bus on feature Pin header FuSa Header I2C Flash Socket JTAG connector LPC internal header USB overcurrent header SM Bus Smart Battery Connector 4 x 7-segment LCD displays for POST codes LPC/eSPI internal header
Alimentación eléctrica	ATX 24 poles connector for carrier board working only Auxiliary 12V connector for carrier board working only 12 VDC power in connector for COM Express module’s working Cabled Coin-cell connector for RTC
Temperatura de funcionamiento	0°C ÷ +60°C (Commercial version) All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final syste
Dimensiones	305x244mm (ATXform factor, 12” x 9.6”)

Software

Enlace	SECO Technical Resources

Documentación

Data Sheet	[Datasheet] DEV-KIT-COMe-T6 Rel 1.6
Manual	[Manual] CCOMe-C96 Rel 1.0

Part Number

Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.

Elementos de artículos agrupados
KTDV-COME6-C96.00	Descripción número de pieza COMe Type 6 Cross Platform Development Kit	Contactarnos

¿No encontró la solución que buscaba?

¿El producto estándar no satisface sus necesidades? SECO puede colaborar para desarrollar juntos una solución de software y un hardware personalizado total o parcialmente.

Para saber más