If you have an account with us, please log in.

* Required Fields

Errore

Q7-C26

Qseven® Rel. 2.1 compliant module with the NXP i.MX 8 Application Processors

Additional Information

Processor

NXP i.MX8 Family:
i.MX 8QuadMax - 2x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores
i.MX 8QuadPlus - 1x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores
i.MX 8Quad - 4x Cortex®-A53 cores + 2x Cortex®-M4F cores

Memory

Soldered Down LPDDR4-3200 memory, 64-bit interface

Graphics

Integrated Graphics Processing Unit, supports 2 independent displays.
Embedded VPU, supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-2, VC-1, RV9, VP8, H.263 and MPEG4 part, HW encoding of AVC/H.264
Supports OpenGL ES 3.1, Open CL 1.2, OpenGL 3.x, DirectX 11

Video Interfaces

HDMI 2.0a or DP 1.3 interface, supporting HDCP 2.2
Dual Channel or 2 x Single Channel 18- / 24-bit LVDS interface

Video Resolution
HDMI: Up to 4Kp60
LVDS Up to 1080p
Mass Storage

1x SATA Gen3 interface (alternative to 1x PCI-e x1 port)
eMMC 5.1 drive soldered on-board
SD 4-bit interface
QSPI Flash soldered-on-board

Networking

1 x Gigabit Ethernet interface

USB

4 x USB 2.0 Host Ports 
1 x USB 3.0 Host Port
1 x USB 2.0 OTG port

PCI-e

Up to 2x PCI-e x1 Gen3 ports

Audio

I2S Audio Interface

Serial Ports

1x UART Tx/Rx/RTS/CTS
1x CAN Bus (TTL level)

Other Interfaces

CSI camera connector
2x I2C Bus
SPI interface
8 x GPI/Os
Boot select signal
Power Management Signals
Watchdog

Power Supply

+5VDC ± 5%
+3.3V_RTC

Operating System

Linux
Android

Operating Temperature

0°C ÷ +60°C (Commercial version)
-40°C ÷ +85°C (Industrial version)

 

*Measured at any point of the heatspreader/heatsink during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific coolingsolutions for the final system.

Dimensions 70x70 mm (2.76” x 2.76”)
Description

The Q7-C26 is a Qseven® Rel. 2.1 compliant module based on the NXP i.MX 8 Application Processors. This solution features rich m2m interface to control onboard subsystems and wide connectivity, taking advantage of the wide scalability offered by Qseven® form factor and the i.MX 8 family.

* User need to register to site before download reserved files. Please login if you are a registered user.

P/N Description Configuration
QC26-0000-2200-C0 Qseven with NXP i.MX 8 Q7-C26 Qseven - NXP i.MX 8, LVDS
Do you want to buy this product?

Accessories

  • CQ7-A42

    Qseven® rel. 2.0 Compliant Carrier Board on 3.5” Form factor

    CQ7-A42
view more

See also

  • Q7-C25

    Qseven® Rel. 2.1 compliant module with the NXP i.MX 8M Application Processors

    Q7-C25
view more


SECO S.p.A. Via Calamandrei, 91, 52100 Arezzo Italy - Phone +39 0575 26979 - Fax: +39 0575 350210 - P.IVA 00325250512
Reg. Imprese n. 4196 Arezzo - REA n. 70645 - Meccanografico AR007079


Images are for illustrative purposes only. Actual product may differ
- ©SECO 2014, All rights reserved.

   

Payment with major credit cards (through Paypal service)

 

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. To learn more or change configurations, read our cookies policy
OK