NEMBUS

NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors

- i.MX6S Solo - Single core up to 1GHz
- i.MX6DL Dual Lite - Dual core up to 1GHz per core

Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F

Dedicated 2D Hardware accelerator
Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
Supports 2 independent displays

1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
HDMI Interface

LVDS, resolution up to 1920x1200
HDMI, resolution up to 1080p

On-board eMMC drive, up to 8 GB
SD / MMC / SDIO interface
Internal SPI Flash for booting

Fast Ethernet (10/100) interface

1 x USB OTG interface
1 x USB 2.0 Host interface

1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

I2S / AC’97 Audio Interface

On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
- Additional SD interface
- Up to 4 UARTs
- CAN interface
- Watchdog(s)
- I2C interfaces
- PWM outputs
- SPI interface
- Additional Audio interface

(*) not all the combinations are allowed simultaneously Power Management Signals

+5VDC ± 5%
Optional Low Power RTC

Linux
Yocto

0°C  ÷ +60 °C (commercial temp.)*
-40°C ÷ +85°C (Industrial temp.)* 

*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.