Benvenuti nel sito SECO S.p.A.

×

Registration

Profile Informations

  • Login Datas

    or login

    First name is required!
    Last name is required!
    Tax/Vat Number is required!
    Company is required!
    VAT Number is required!
    Country is required!
    First name is not valid!
    Last name is not valid!
    This is not an email address!
    Email address is required!
    This email is already registered!
    Password is required!
    Enter a valid password!
    Please enter 6 or more characters!
    Please enter 16 or less characters!
    Passwords are not same!
    Terms and Conditions are required!
    Email or Password is wrong!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleaseclick here

    SBC-984

    SBC with NXP i.MX 6 Processor

    • Single-, Dual- and Quad- Core (ARM Cortex™A9 Cores)
    • miniPCI-e slot; CAN Bus; Wi-Fi add-on module;
    • 2D/3D dedicated graphics processors
    • Up to 2GB DDR3L on-board
    Available in Industrial Temperature Range

      SBC-984

    SBC-984

    Q7-928

    Q7-928

    μQ7-A75-J

    μQ7-A75-J

    SBC-A62-J

    SBC-A62-J

     
    Product Development Status
    Processor

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6DP DualPlus - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    NXP i.MX6 Family, based on ARM® CORTEX-A9 processors

    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core

    NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
    SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
    SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
    SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
    SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

    Chipset
    ...
    ...
    ...
    ...
    Max Cores
    4
    4
    2
    4
    Max Thread
    0
    0
    ...
    0
    Memory
    Up to 2GB DDR3L on-board (up to 1GB with i.MX6S)
    Up to 4GB DDR3L on-board (up to 2GB with i.MX6S)

    Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F

    Soldered on-board DDR3L memory***:
    SBC-A62-J-SOLO: 512MB 32-bit interface
    SBC-A62-J-LITE: 1GB 64-bit interface
    SBC-A62-J-PLUS: 2GB 64-bit interface
    SBC-A62-J-QUAD: 1GB 64-bit interface

    *** For additional configurability please contact SECO

    Graphics

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q)
    Supports up to 3 independent displays with i.MX6D and i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES 2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D, i.MX6DP and i.MX6Q)
    Enhanced 2D and 3D graphics with i.MX6DP
    Supports up to 3 independent displays with i.MX6D, i.MX6DPand i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Supports 2 independent displays

    Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
    OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
    SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

    Video Interfaces

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface
    Video Input Port / Camera connector (only with PCB rev. C or higher)

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4
    Video Input Port / Camera Connector

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface

    1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
    HDMI interface 1.4

    Video Resolution
    LVDS, up to 1920x1200
    HDMI, up to 1080p

    LVDS, up to 1920x1200
    HDMI, up to 1080p

    LVDS, resolution up to 1920x1200
    HDMI, resolution up to 1080p

    HDMI: up to 1920 x 1080p
    LVDS: up to 1920 x 1200

    Mass Storage
    On-board eMMC drive, up to 8 GB
    mSATA Half-size slot (shared with miniPCI-express)

    On-board eMMC drive, up to 32 GB
    SD / MMC / SDIO interface
    1 x μSD Card Slot on-board
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)

    On-board eMMC drive, up to 8 GB
    SD / MMC / SDIO interface
    Internal SPI Flash for booting

    4GB eMMC drive soldered onboard***
    microSD Card slot
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

    *** For additional configurability please contact SECO

    Networking
    Gigabit Ethernet connector
    Gigabit Ethernet interface
    Fast Ethernet (10/100) interface

    Gigabit Ethernet connector
    Internal USB connector for Wi-Fi Module

    USB
    3 x standard USB 2.0 Type A
    1 x USB OTG on micro-AB connector
    Internal USB for optional WiFi module

    1 x USB OTG interface
    4 x USB 2.0 Host interfaces

    1 x USB OTG interface
    1 x USB 2.0 Host interface

    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    PCI-e
    miniPCI-express slot, shared with mSATA (only PCI-e 1.1 and Gen2 are supported)
    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    ...
    Audio
    AC’97 Audio Codec

    Mic In, Line out internal pin header connector
    AC'97 Audio Interface
    I2S
    I2S / AC’97 Audio Interface

    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
    AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

    Serial Ports
    1 x RS-232 serial port
    TTL debug UART (Tx, RX only)
    CAN interface internal connector

    2 x serial ports (TTL interface)
    CAN port interface

    ...

    Debug UART interface, TTL voltage level.
    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
    Other serial interfaces on the expansion connector:
    SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
    SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

    Other Interfaces
    I2C touch Connector
    Internal connector for power and reset buttons

    I2C Bus
    LPC Bus
    SM Bus
    Power Management Signals

    On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
    - Additional SD interface
    - Up to 4 UARTs
    - CAN interface
    - Watchdog(s)
    - I2C interfaces
    - PWM outputs
    - SPI interface
    - Additional Audio interface

    (*) not all the combinations are allowed simultaneously Power Management Signals

    Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
    Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

    * Please note that some of these interfaces are factory options, other configurations are made via SW.

    Power Supply
    +12VDC ± 10%
    Embedded additional RTC circuitry for lowest power consumption
    Optional RTC Battery with lead cable and connector

    +5VDC ± 5%

    +5VDC ± 5%
    Optional Low Power RTC

    +12VDC; Additional embedded Low Power RTC;
    SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

    Power Consumption
    ...
    ...
    ...
    ...
    Operating System
    Linux

    Linux
    Yocto
    Microsoft® Windows Embedded Compact 7

    Linux
    Yocto

    - Free Android and Linux community BSP available at UDOO.org
    - SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
    - Yocto Guideline valid for SECO BSP

    Operating Temperature

    0°C  ÷ +70 °C (commercial version)
    -40°C ÷ +85°C (industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +70°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (Industrial temp.)* 

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)**
    For industrial temp. (-40°C ÷ +85°C)** please contact us

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    80 x 67 mm (3,15” x 2,64”)
    70x70 mm (2.76” x 2.76”)
    40x70 mm (1.57” x 2.76”)
    110 x 86.5 mm (4.5” x 3.7”)

    Description

    Details

    SBC-984 is a Single Board Computer (only 80 x 67 mm) based on i.MX6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex™ A9 ARM Core (up to Quad Core processors), ideal for applications requiring multimedia capabilities and/or high levels of parallel computing, maintaining advantages offered by low-power consuming ARM architecture in an extremely reduced space.
    Additional Information

    Additional Information

    Processor

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    Max Cores
    4
    Memory
    Up to 2GB DDR3L on-board (up to 1GB with i.MX6S)
    Graphics

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q)
    Supports up to 3 independent displays with i.MX6D and i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Video Interfaces

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface
    Video Input Port / Camera connector (only with PCB rev. C or higher)

    Video Resolution
    LVDS, up to 1920x1200
    HDMI, up to 1080p
    Mass Storage
    On-board eMMC drive, up to 8 GB
    mSATA Half-size slot (shared with miniPCI-express)
    Networking
    Gigabit Ethernet connector
    USB
    3 x standard USB 2.0 Type A
    1 x USB OTG on micro-AB connector
    Internal USB for optional WiFi module
    PCI-e
    miniPCI-express slot, shared with mSATA (only PCI-e 1.1 and Gen2 are supported)
    Audio
    AC’97 Audio Codec

    Mic In, Line out internal pin header connector
    Serial Ports
    1 x RS-232 serial port
    TTL debug UART (Tx, RX only)
    CAN interface internal connector
    Other Interfaces
    I2C touch Connector
    Internal connector for power and reset buttons
    Power Supply
    +12VDC ± 10%
    Embedded additional RTC circuitry for lowest power consumption
    Optional RTC Battery with lead cable and connector
    Operating System
    Linux
    Operating Temperature

    0°C  ÷ +70 °C (commercial version)
    -40°C ÷ +85°C (industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    80 x 67 mm (3,15” x 2,64”)
    Software
    SECO WIKI
    BSP
    • SECO BSP*
    Linux-YOCTO
    • Yocto BSP*

    * User need to register to site before download reserved files. Please login if you are a registered user.

    SBC-984

    SBC-984
    • EVALUATE OUR PRODUCTS

      Max. 3 pcs per part number
    • SAMPLING PRICE

      Shipping costs included
    • BUSINESS TO BUSINESS ONLY

      Technical support provided exclusively to businesses
    SBC with NXP i.MX 6 Processor
    sku part number part number description part number configuration buy samples online contact us compare
    S984-1110-1000-C1 P/N SECOμSBC-i.MX6 1 i.MX6 Solo @1 GHz, DDR3L 512MB, eMMC 4GB, RTC low power (commercial temp.) Add to Compare
    S984-1220-1000-C1 micro SBC Freescale™ i.MX6S i.MX6 Solo @1 GHz - DDR3L 1GB - eMMC 8GB - RTC low power - Com. Temp. Add to Compare
    S984-2310-1000-C1 P/N SECOμSBC-i.MX6 4 i.MX6 Dual Lite @1 GHz, DDR3L 1GB, eMMC 4GB, RTC low power (commercial temp.) Add to Compare
    S984-2310-1000-I1 P/N SECOμSBC-i.MX6 5 i.MX6 Dual Lite @800 MHz, DDR3L 1GB, eMMC 4GB, RTC low power (industrial temp.) Add to Compare
    S984-2410-1000-C1 P/N SECOμSBC-i.MX6 6 i.MX6 Dual Lite @1 GHz, DDR3L 2GB, eMMC 4GB, RTC low power (commercial temp.) Add to Compare
    S984-3310-1000-C1 P/N SECOμSBC-i.MX6 7 i.MX6 Dual @1 GHz, DDR3L 1GB, eMMC 4GB, RTC low power (commercial temp.) Add to Compare
    S984-3410-1000-C1 micro SBC Freescale™ i.MX6D i.MX6 Dual @1 GHz - DDR3L 2GB - eMMC 4GB - RTC low power - Com. Temp. Add to Compare
    S984-4310-1000-C1 P/N SECOμSBC-i.MX6 8 i.MX6 Quad @1 GHz, DDR3L 1GB, eMMC 4GB, RTC low power (Commercial temp.) Add to Compare
    S984-4410-1000-C1 P/N SECOμSBC-i.MX6 10 i.MX6 Quad @1 GHz, DDR3L 2GB, eMMC 4GB, RTC low power (commercial temp.) Add to Compare
    S984-4410-1000-I1 P/N SECOμSBC-i.MX6 11 i.MX6 Quad @ 800MHz, DDR3L 2GB, eMMC 4GB, RTC low power (industrial temp.) Add to Compare

    • Industrial Automation
    • Infotainment/Vending
    • Medical
    • Security/Surveillance
    • Transportation
    Top