Benvenuti nel sito SECO S.p.A.

×

Registration

Profile Informations

  • Login Datas

    or login

    First name is required!
    Last name is required!
    Tax/Vat Number is required!
    Company is required!
    VAT Number is required!
    Country is required!
    First name is not valid!
    Last name is not valid!
    This is not an email address!
    Email address is required!
    This email is already registered!
    Password is required!
    Enter a valid password!
    Please enter 6 or more characters!
    Please enter 16 or less characters!
    Passwords are not same!
    Terms and Conditions are required!
    Email or Password is wrong!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleaseclick here

    Q7-922

    Computer on Module with NVIDIA® Tegra® T30 Processor

    • ARM® CORTEX -A9 Quad MPCore® CPU, 1.3 GHz per core

    • 6x USB 2.0
    • NVIDIA GeForce Ultra low power GPU
    • up to 2GB DDR3L on-board soldered memory

      Q7-922

    Q7-922

    Q7-C26

    Q7-C26

    μQ7-962

    μQ7-962

    SYS-B08-7/BD

    SYS-B08-7/BD

     
    Product Development Status
    Processor
    NVIDIA® Tegra® T30 with Quad ARM® CORTEX -A9
    MPCore® CPU, 1.3 GHz per core

    NXP i.MX 8 Family:
    i.MX 8QuadMax - 2x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores
    i.MX 8QuadPlus - 1x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores
    i.MX 8Quad - 4x Cortex®-A53 cores + 2x Cortex®-M4F cores

    NXP i.MX 6 Family, based on ARM® CORTEX® -A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core
    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
    Chipset
    ...
    ...
    ...
    ...
    Max Cores
    4
    0
    4
    1 + 1
    Max Thread
    0
    0
    0
    ...
    Memory
    up to 2GB DDR3L on-board soldered memory

    soldered down LPDDR4-3200 memory, 64-bit interface

    up to 2GB DDR3L on-board (up to 1GB with i.MX6S)
    512MB RAM
    Graphics
    embedded NVIDIA® ULP GeForce® GPU
    Integrated High Definition Audio-Video Processor
    Dual independent display support

    Integrated Graphics Processing Unit, supports 2 independent displays.
    Embedded VPU, supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-2, VC-1, RV9, VP8, H.263 and MPEG4 part, HW encoding of AVC/H.264
    Supports OpenGL ES 3.1, Open CL 1.2, OpenGL 3.x, DirectX 11

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q)
    Supports up to 3 independent displays with i.MX6D and i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Video Interfaces
    LVDS Single / Dual Channel 18 / 24 bit interface
    HDMI 1.4a Interface
    Video Input Port / Camera connector

    HDMI 2.0a or DP 1.3 interface, supporting HDCP 2.2
    Dual Channel or 2 x Single Channel 18- / 24-bit LVDS interface

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    Video Resolution
    HDMI: Up to 1920 x 1080p
    LVDS: Up to 2048 x 1536
    HDMI:Up to 4Kp60
    LVDSUp to 1080p
    HDMI, up to 1080p
    LVDS, up to 1920x1200

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    Mass Storage
    Up to 16GB on-board soldered eMMC drive
    1 x S-ATA Channel
    microSD Slot on-board
    4-bit SD / MMC interface

    1x SATA Gen3 interface (alternative to 1x PCI-e x1 port)
    eMMC 5.1 drive soldered on-board
    SD 4-bit interface
    QSPI Flash soldered-on-board

    Up to 8 GB eMMC drive soldered onboard
    SD / MMC / SDIO interface
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    Networking
    Gigabit Ethernet Interface

    1 x Gigabit Ethernet interface

    Gigabit Ethernet interface
    1x FastETH
    USB
    6 x USB 2.0 Host ports

    4 x USB 2.0 Host Ports 
    1 x USB 3.0 Host Port
    1 x USB 2.0 OTG port

    1 x USB OTG interface
    4 x USB 2.0 Host interfaces
    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header
    PCI-e
    1 x PCI-e x4 lane, or 2 x PCI-e x2 lanes
    (with support for 2 x PCI-e x 1 devices)

    Up to 2x PCI-e x1 Gen3 ports

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
    ...
    Audio
    HD Audio Interface

    I2S Audio Interface

    I2S / AC’97 Audio Interface
    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header
    Serial Ports

    2 serial ports (Tx, Rx signals)
    CAN Bus Interface

    1x UART Tx/Rx/RTS/CTS
    1x CAN Bus (TTL level)

    2 x Serial ports (TTL interface)
    CAN port interface

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    Other Interfaces
    I2C, SM Bus, LPC, SPI
    One Wire Interface
    Thermal Cooling Interface
    Power management signals

    CSI camera connector
    2x I2C Bus
    SPI interface
    8 x GPI/Os
    Boot select signal
    Power Management Signals
    Watchdog

    I2C Bus
    SM Bus
    Power Management Signals

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    Power Supply

    +5VDC ± 5%

    +5VDC ± 5%
    +3.3V_RTC

    +5VDC ± 5%

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    Power Consumption
    ...
    ...
    ...
    ...
    Operating System
    Linux

    Linux
    Yocto
    Android

    Linux
    Yocto
    Linux
    Operating Temperature

    0°C ÷ +60°C (commercial version)
    -20°C ÷ +70°C (extended version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C (Industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +60°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Commercial
    Dimensions
    70x70 mm (2.76” x 2.76”)
    70x70 mm (2.76” x 2.76”)
    40x70 mm (μQseven, 1.57” x 2.76”)
    189.60 x 121.40 x 28.20 mm
    Security
    ...
    ...
    ...
    ...
    BIOS
    ...
    ...
    ...
    ...
    Embedded Controller Functionalities
    ...
    ...
    ...
    ...

    Description

    Details

    Q7-922 is a Qseven® Rel. 1.20 Compliant Module designed by SECO that represents the top performance possibility for computational and graphical applications based on low power ARM architectures.
    The board integrates Tegra® T30 High-Definition Mobile processor from NVIDIA®, a Quad-Core Cortex A9 CPU with frequencies up to 1.3GHz.
    Additional Information

    Additional Information

    Processor
    NVIDIA® Tegra® T30 with Quad ARM® CORTEX -A9
    MPCore® CPU, 1.3 GHz per core
    Max Cores
    4
    Memory
    up to 2GB DDR3L on-board soldered memory
    Graphics
    embedded NVIDIA® ULP GeForce® GPU
    Integrated High Definition Audio-Video Processor
    Dual independent display support
    Video Interfaces
    LVDS Single / Dual Channel 18 / 24 bit interface
    HDMI 1.4a Interface
    Video Input Port / Camera connector
    Video Resolution
    HDMI: Up to 1920 x 1080p
    LVDS: Up to 2048 x 1536
    Video Interfaces
    SINGLE CHANNEL LVDS, DUAL CHANNEL LVDS, HDMI
    Mass Storage
    Up to 16GB on-board soldered eMMC drive
    1 x S-ATA Channel
    microSD Slot on-board
    4-bit SD / MMC interface
    Networking
    Gigabit Ethernet Interface
    USB
    6 x USB 2.0 Host ports
    PCI-e
    1 x PCI-e x4 lane, or 2 x PCI-e x2 lanes
    (with support for 2 x PCI-e x 1 devices)
    Audio
    HD Audio Interface
    Serial Ports

    2 serial ports (Tx, Rx signals)
    CAN Bus Interface

    Other Interfaces
    I2C, SM Bus, LPC, SPI
    One Wire Interface
    Thermal Cooling Interface
    Power management signals
    Power Supply

    +5VDC ± 5%

    Operating System
    Linux
    Operating Temperature

    0°C ÷ +60°C (commercial version)
    -20°C ÷ +70°C (extended version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    70x70 mm (2.76” x 2.76”)
    Software
    Linux Kernel Patches
    • Patch to add jedec 5.1 Support*
    • e1000e_kernel_R16r2_svn1152.tar.gz*
    • Release Note - e1000e Patch.pdf*
    Linux 1.4
    • Linaro Compiler*
    • Kernel Linux 3.1.10*
    • File System Ubuntu 12.04 - Desktop version*
    • File System Ubuntu 12.04 - minimal version*
    • SECO Flash Bootargs*
    • SECO Tools*
    • U-Boot 2011.03*
    • md5sum.txt*

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Q7-922

    Q7-922
    • EVALUATE OUR PRODUCTS

      Max. 3 pcs per part number
    • SAMPLING PRICE

      Shipping costs included
    • BUSINESS TO BUSINESS ONLY

      Technical support provided exclusively to businesses
    Computer on Module with NVIDIA® Tegra® T30 Processor
    sku part number part number description part number configuration buy samples online contact us compare
    Q922-1210-1000-C0 Q7 - Nvidia Tegra T30@1.3GHz, 2GB DDR3L Dual Channel, 4GB eMMC, CAN Controller - Commercial temp. range Q7 - Nvidia Tegra T30@1.3GHz, 2GB DDR3L Dual Channel, 4GB eMMC, CAN Controller - Commercial temp. range Add to Compare

    • Devices
    • Industrial Automation
    • Security/Surveillance
    • Transportation
    • Utilities (Energy-Telco)
    Top