Benvenuti nel sito SECO S.p.A.

×

Registrazione

Informazioni Account

  • Dati di Login

    o Accedi

    Nome obbligatorio!
    Cognome obbligatorio!
    Codice Fiscale obbligatorio
    Società obbligatoria!
    Partita IVA obbligatoria!
    Paese Obbligatorio!
    Nome non valido!
    Cognome non valido!
    Questo non è un indirizzo e-mail!
    Indirizzo e-mail obbligatorio!
    Questa e-mail esiste già!
    Password obbligatoria!
    Inserisci una password valida!
    Inserisci 6 o più caratteri!
    Inserisci 16 o meno caratteri!
    Le password non coincidono!
    Termini e Condizioni obbligatorio!
    E-mail o Password errata!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleaseclick here

    Altre viste

    SYS-A62-10

    Embedded Panel with 10.1” LCD display based on the Multicore NXP i.MX 6 SoC family

    • Solo, Dual Lite and Quad- Core (ARM® Cortex® A9 Cores)
    • Wi-Fi add-on module; up 22 GPI/Os; CAN Bus
    • 30K hours 10.1" LVDS display with projected capacitive touchscreen integrated

    • Up to 1GB DDR3L on-board

      SYS-A62-10

    SYS-A62-10

    μQ7-A75-J

    μQ7-A75-J

    SYS-B08-7/BD

    SYS-B08-7/BD

    SBC-A62-J

    SBC-A62-J

     
    Product Development Status
    Processor
    Multicore NXP i.MX 6 processor family
    SYS-A62-10/SOLO: i.MX6S Solo, 1 x ARM Cortex-A9 @1 GHz Core
    SYS-A62-10/LITE: i.MX6DL Dual Lite, 2 x ARM Cortex-A9 @1 GHz Cores
    SYS-A62-10/QUAD: i.MX6Q Quad, 4 x ARM Cortex-A9 @1 GHz Cores

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors

    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core

    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

    NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
    SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
    SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
    SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
    SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

    Chipset
    ...
    ...
    ...
    ...
    Max Cores
    0
    2
    1 + 1
    4
    Max Thread
    0
    ...
    ...
    0
    Memory
    On-board DDR3L soldered memory;
    SYS-A62-10/SOLO: 512MB 32-bit
    SYS-A62-10/LITE: 1GB 64-bit
    SYS-A62-10/QUAD: 1GB 64-bit

    Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F

    512MB RAM

    Soldered on-board DDR3L memory***:
    SBC-A62-J-SOLO: 512MB 32-bit interface
    SBC-A62-J-LITE: 1GB 64-bit interface
    SBC-A62-J-PLUS: 2GB 64-bit interface
    SBC-A62-J-QUAD: 1GB 64-bit interface

    *** For additional configurability please contact SECO

    Graphics
    2D, OpenGL® ES2.0 3D HW accelerator
    OpenVG™ accelerator (SYS-A62/10/QUAD only)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Supports 2 independent displays

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
    OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
    SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

    Video Interfaces
    10,1” LVDS display, resolution 1280 x 800, 30K hours life
    P-Cap (Projected Capacitive touch screen), with 2mm glass cover
    Glass Hardness IK08, Surface Hardness 8H (450g)

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
    HDMI interface 1.4

    Video Resolution
    ...

    LVDS, resolution up to 1920x1200
    HDMI, resolution up to 1080p

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    HDMI: up to 1920 x 1080p
    LVDS: up to 1920 x 1200

    Mass Storage
    On-board 4GB eMMC drive
    microSD Card Slot
    SATA Connector (SYS-A62-10/QUAD only)

    On-board eMMC drive, up to 8 GB
    SD / MMC / SDIO interface
    Internal SPI Flash for booting

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    4GB eMMC drive soldered onboard***
    microSD Card slot
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

    *** For additional configurability please contact SECO

    Networking
    Gigabit Ethernet connector
    Optional WiFi pluggable module
    Fast Ethernet (10/100) interface
    1x FastETH

    Gigabit Ethernet connector
    Internal USB connector for Wi-Fi Module

    USB
    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port

    1 x USB OTG interface
    1 x USB 2.0 Host interface

    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header
    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    PCI-e
    ...

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    ...
    ...
    Audio
    SYS-A62-10/LITE and SYS-A62-10/QUAD: Realtek ALC655
    AC’97 Audio Codec with Mic-In, Line-Out audio Jacks
    I2S / AC’97 Audio Interface
    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header

    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
    AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

    Serial Ports
    Dedicated Serial ports:
    SYS-A62-10/SOLO: 2 x RS-232 ports 
    SYS-A62-10/LITE: 2 x RS-232 ports, 1 x CAN port
    SYS-A62-10/QUAD: 2 x RS-232 ports, 1 x RS-485 port, 1 x CAN port

    Other serial ports can be realised on expansion connector (see ""Other interfaces"")
    ...

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    Debug UART interface, TTL voltage level.
    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
    Other serial interfaces on the expansion connector:
    SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
    SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

    Other Interfaces
    MIPI-CSI Camera connector
    Programmable expansion connector with:
    SYS-A62-10/SOLO: up to 22 GPIOs, 2 x TTL CAN ports, 1 x UART TTL, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    SYS-A62-10/LITE: up to 20 GPIOs, 1 x TTL CAN port, 1 x UART TTL, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    SYS-A62-10/QUAD: up to 18 GPIOs, 1 x TTL CAN port, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces

    On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
    - Additional SD interface
    - Up to 4 UARTs
    - CAN interface
    - Watchdog(s)
    - I2C interfaces
    - PWM outputs
    - SPI interface
    - Additional Audio interface

    (*) not all the combinations are allowed simultaneously Power Management Signals

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
    Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

    * Please note that some of these interfaces are factory options, other configurations are made via SW.

    Power Supply

    +12VDC
    SYS-A62-10/SOLO and SYS-A62-10/LITE: internal i.MX6 RTC, require external battery for time/data retention
    SYS-A62-10/QUAD: low power RTC with on-board battery

    +5VDC ± 5%
    Optional Low Power RTC

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    +12VDC; Additional embedded Low Power RTC;
    SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

    Power Consumption
    ...
    ...
    ...
    ...
    Operating System
    Linux
    Yocto
    Windows® Embedded Compact 7

    Linux
    Yocto

    Linux

    - Free Android and Linux community BSP available at UDOO.org
    - SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
    - Yocto Guideline valid for SECO BSP

    Operating Temperature

    0°C ÷ 50°C

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (Industrial temp.)* 

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Commercial

    0°C  ÷ +60 °C (commercial temp.)**
    For industrial temp. (-40°C ÷ +85°C)** please contact us

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    269,60 x 189,20 x 17,17 mm
    40x70 mm (1.57” x 2.76”)
    189.60 x 121.40 x 28.20 mm
    110 x 86.5 mm (4.5” x 3.7”)
    Security
    N/A
    N/A
    N/A
    N/A
    BIOS
    N/A
    N/A
    N/A
    N/A
    Embedded Controller Functionalities
    N/A
    N/A
    N/A
    N/A

    Descrizione

    Dettagli

    The SYS-A62-10 is a 10.1” Panel PC based on the Multicore NXP i.MX 6 SoC family. Featuring a long-endurance display (30K hours) with 1280 (RGB) X 800 resolution, along with P-Cap (Projected-Capacitive touch) technology and glass cover, this system - available both with Linux and WEC7 - is an easy-to-integrate, flexible, open-source solution, particularly suitable for HMI, Industrial Iot, PoS and Vending applications.
    Ulteriori informazioni

    Ulteriori informazioni

    Processor
    Multicore NXP i.MX 6 processor family
    SYS-A62-10/SOLO: i.MX6S Solo, 1 x ARM Cortex-A9 @1 GHz Core
    SYS-A62-10/LITE: i.MX6DL Dual Lite, 2 x ARM Cortex-A9 @1 GHz Cores
    SYS-A62-10/QUAD: i.MX6Q Quad, 4 x ARM Cortex-A9 @1 GHz Cores
    Memory
    On-board DDR3L soldered memory;
    SYS-A62-10/SOLO: 512MB 32-bit
    SYS-A62-10/LITE: 1GB 64-bit
    SYS-A62-10/QUAD: 1GB 64-bit
    Graphics
    2D, OpenGL® ES2.0 3D HW accelerator
    OpenVG™ accelerator (SYS-A62/10/QUAD only)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    Video Interfaces
    10,1” LVDS display, resolution 1280 x 800, 30K hours life
    P-Cap (Projected Capacitive touch screen), with 2mm glass cover
    Glass Hardness IK08, Surface Hardness 8H (450g)
    Mass Storage
    On-board 4GB eMMC drive
    microSD Card Slot
    SATA Connector (SYS-A62-10/QUAD only)
    Networking
    Gigabit Ethernet connector
    Optional WiFi pluggable module
    USB
    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    Audio
    SYS-A62-10/LITE and SYS-A62-10/QUAD: Realtek ALC655
    AC’97 Audio Codec with Mic-In, Line-Out audio Jacks
    Serial Ports
    Dedicated Serial ports:
    SYS-A62-10/SOLO: 2 x RS-232 ports 
    SYS-A62-10/LITE: 2 x RS-232 ports, 1 x CAN port
    SYS-A62-10/QUAD: 2 x RS-232 ports, 1 x RS-485 port, 1 x CAN port

    Other serial ports can be realised on expansion connector (see ""Other interfaces"")
    Other Interfaces
    MIPI-CSI Camera connector
    Programmable expansion connector with:
    SYS-A62-10/SOLO: up to 22 GPIOs, 2 x TTL CAN ports, 1 x UART TTL, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    SYS-A62-10/LITE: up to 20 GPIOs, 1 x TTL CAN port, 1 x UART TTL, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    SYS-A62-10/QUAD: up to 18 GPIOs, 1 x TTL CAN port, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    Power Supply

    +12VDC
    SYS-A62-10/SOLO and SYS-A62-10/LITE: internal i.MX6 RTC, require external battery for time/data retention
    SYS-A62-10/QUAD: low power RTC with on-board battery

    Operating System
    Linux
    Yocto
    Windows® Embedded Compact 7
    Operating Temperature

    0°C ÷ 50°C

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    269,60 x 189,20 x 17,17 mm
    Software

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Documentazione

    * User need to register to site before download reserved files. Please login if you are a registered user.

    SYS-A62-10

    SYS-A62-10
    • EVALUATE OUR PRODUCTS

      Max. 3 pcs per part number
    • SAMPLING PRICE

      Shipping costs included
    • BUSINESS TO BUSINESS ONLY

      Technical support provided exclusively to business

    Orders placed between August 3dr and August 21st 2019 will be shipped from August 23rd 2019

    Embedded Panel with 10.1” LCD display based on the Multicore NXP i.MX 6 SoC family
    sku part number part number description part number configuration buy samples online Contattaci compare
    SYS-A62-10/QUAD SA62 Quad based HMI system with 10,1” LCD display, touch SA62 Quad based HMI system with 10,1” LCD display, touch Confronta
    SYS-A62-10/LITE SA62 DualLite based HMI system with 10,1” LCD display, touch SA62 DualLite based HMI system with 10,1” LCD display, touch Confronta
    SYS-A62-10/SOLO SA62 Solo based HMI system with 10,1” LCD display, touch SA62 Solo based HMI system with 10,1” LCD display, touch Confronta

    • Infotainment/Vending
    • Iot
    • Measuring Instruments
    • Medical
    • Transportation
    Top