Benvenuti nel sito SECO S.p.A.

×

Registrazione

Informazioni Account

  • Dati di Login

    o Accedi

    Nome obbligatorio!
    Cognome obbligatorio!
    Codice Fiscale obbligatorio
    Società obbligatoria!
    Partita IVA obbligatoria!
    Paese Obbligatorio!
    Nome non valido!
    Cognome non valido!
    Questo non è un indirizzo e-mail!
    Indirizzo e-mail obbligatorio!
    Questa e-mail esiste già!
    Password obbligatoria!
    Inserisci una password valida!
    Inserisci 6 o più caratteri!
    Inserisci 16 o meno caratteri!
    Le password non coincidono!
    Termini e Condizioni obbligatorio!
    E-mail o Password errata!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleaseclick here

    SBC-984

    SBC with NXP i.MX 6 Processor

    • Single-, Dual- and Quad- Core (ARM Cortex™A9 Cores)
    • miniPCI-e slot; CAN Bus; Wi-Fi add-on module;
    • 2D/3D dedicated graphics processors
    • Up to 2GB DDR3L on-board
    Available in Industrial Temperature Range

      SBC-984

    SBC-984

    SYS-A62-10

    SYS-A62-10

    μQ7-A76-J

    μQ7-A76-J

     
    Product Development Status
    Processor

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    Multicore NXP i.MX 6 processor family
    SYS-A62-10/SOLO: i.MX6S Solo, 1 x ARM Cortex-A9 @1 GHz Core
    SYS-A62-10/LITE: i.MX6DL Dual Lite, 2 x ARM Cortex-A9 @1 GHz Cores
    SYS-A62-10/QUAD: i.MX6Q Quad, 4 x ARM Cortex-A9 @1 GHz Cores

    Intel® Atom™ E3825, Dual Core @1.33GHz, 1MB Cache, 6W TDP
    Intel® Atom™ E3815, Single Core @1.46GHz, 512KB Cache, 5W TDP
    Intel® Celeron® N2807, Dual Core @1.58GHz, 1MB Cache, 4.3W TDP

    Chipset
    ...
    ...
    ...
    Max Cores
    4
    0
    2
    Max Thread
    0
    0
    2
    Memory
    Up to 2GB DDR3L on-board (up to 1GB with i.MX6S)
    On-board DDR3L soldered memory;
    SYS-A62-10/SOLO: 512MB 32-bit
    SYS-A62-10/LITE: 1GB 64-bit
    SYS-A62-10/QUAD: 1GB 64-bit

    Soldered onboard DDR3L memory
    E3825, E3815:  up to 4GB Single-Channel DDR3L @ 1066MHz
    N2807: up to 4GB Single-Channel DDR3L @ 1333MHz

    Graphics

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q)
    Supports up to 3 independent displays with i.MX6D and i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    2D, OpenGL® ES2.0 3D HW accelerator
    OpenVG™ accelerator (SYS-A62/10/QUAD only)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX

    Integrated Intel® HD Graphics 4000 Series controller
    Dual independent display support
    HW decoding of H.264, MPEG2, MVC, VC1, VP8, MJPEG formats
    HW encoding of H.264, MPEG2 and MVC formats

    Video Interfaces

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface
    Video Input Port / Camera connector (only with PCB rev. C or higher)

    10,1” LVDS display, resolution 1280 x 800, 30K hours life
    P-Cap (Projected Capacitive touch screen), with 2mm glass cover
    Glass Hardness IK08, Surface Hardness 8H (450g)

    Multimode Display Port (DP++) interface
    18 / 24 bit Dual Channel LVDS interface

    Video Resolution
    LVDS, up to 1920x1200
    HDMI, up to 1080p
    ...
    DP++ (HDMI compatible) Up to 2560x1600@60Hz
    LVDS interface Up to 1920x1200@60Hz
    Mass Storage
    On-board eMMC drive, up to 8 GB
    mSATA Half-size slot (shared with miniPCI-express)
    On-board 4GB eMMC drive
    microSD Card Slot
    SATA Connector (SYS-A62-10/QUAD only)
    2 x external S-ATA channels
    SD interface
    Optional eMMC drive soldered onboard
    Networking
    Gigabit Ethernet connector
    Gigabit Ethernet connector
    Optional WiFi pluggable module
    Gigabit Ethernet interface
    USB
    3 x standard USB 2.0 Type A
    1 x USB OTG on micro-AB connector
    Internal USB for optional WiFi module
    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    1 x USB 3.0 Host port
    4 x USB 2.0 Host ports (one shared with USB 3.0 interface)
    PCI-e
    miniPCI-express slot, shared with mSATA (only PCI-e 1.1 and Gen2 are supported)
    ...
    3 x PCI-e x1 lanes (Gen2)
    Audio
    AC’97 Audio Codec

    Mic In, Line out internal pin header connector
    SYS-A62-10/LITE and SYS-A62-10/QUAD: Realtek ALC655
    AC’97 Audio Codec with Mic-In, Line-Out audio Jacks
    HD Audio Interface
    Serial Ports
    1 x RS-232 serial port
    TTL debug UART (Tx, RX only)
    CAN interface internal connector
    Dedicated Serial ports:
    SYS-A62-10/SOLO: 2 x RS-232 ports 
    SYS-A62-10/LITE: 2 x RS-232 ports, 1 x CAN port
    SYS-A62-10/QUAD: 2 x RS-232 ports, 1 x RS-485 port, 1 x CAN port

    Other serial ports can be realised on expansion connector (see ""Other interfaces"")
    1 x Serial Port (TTL interface, Tx/Rx only)
    Other Interfaces
    I2C touch Connector
    Internal connector for power and reset buttons
    MIPI-CSI Camera connector
    Programmable expansion connector with:
    SYS-A62-10/SOLO: up to 22 GPIOs, 2 x TTL CAN ports, 1 x UART TTL, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    SYS-A62-10/LITE: up to 20 GPIOs, 1 x TTL CAN port, 1 x UART TTL, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    SYS-A62-10/QUAD: up to 18 GPIOs, 1 x TTL CAN port, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces

    I2C bus
    LPC Bus
    SM Bus
    Thermal / FAN Management
    PWR Management signals

    Power Supply
    +12VDC ± 10%
    Embedded additional RTC circuitry for lowest power consumption
    Optional RTC Battery with lead cable and connector

    +12VDC
    SYS-A62-10/SOLO and SYS-A62-10/LITE: internal i.MX6 RTC, require external battery for time/data retention
    SYS-A62-10/QUAD: low power RTC with on-board battery

    +5VDC ± 5%
    Power Consumption
    ...
    ...
    ...
    Operating System
    Linux
    Linux
    Yocto
    Windows® Embedded Compact 7

    Microsoft® Windows 7
    Microsoft® Windows 8.1
    Microsoft® Windows 10
    Microsoft® Windows 10 IoT
    Microsoft® Windows Embedded Standard 7
    Microsoft® Windows Embedded Compact 7
    Linux
    Yocto

    Operating Temperature

    0°C  ÷ +70 °C (commercial version)
    -40°C ÷ +85°C (industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ 50°C

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +60°C

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    80 x 67 mm (3,15” x 2,64”)
    269,60 x 189,20 x 17,17 mm
    40 x 70 mm (1.57 x 2.76)
    Security
    ...
    ...
    ...
    BIOS
    ...
    ...
    ...
    Embedded Controller Functionalities
    ...
    ...
    ...
    CAN Bus
    ...
    ...
    ...
    Functional Safety Features
    ...
    ...
    ...

    Descrizione

    Dettagli

    SBC-984 is a Single Board Computer (only 80 x 67 mm) based on i.MX6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex™ A9 ARM Core (up to Quad Core processors), ideal for applications requiring multimedia capabilities and/or high levels of parallel computing, maintaining advantages offered by low-power consuming ARM architecture in an extremely reduced space.
    Ulteriori informazioni

    Ulteriori informazioni

    Processor

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    Max Cores
    4
    Memory
    Up to 2GB DDR3L on-board (up to 1GB with i.MX6S)
    Graphics

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q)
    Supports up to 3 independent displays with i.MX6D and i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Video Interfaces

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface
    Video Input Port / Camera connector (only with PCB rev. C or higher)

    Video Resolution
    LVDS, up to 1920x1200
    HDMI, up to 1080p
    Mass Storage
    On-board eMMC drive, up to 8 GB
    mSATA Half-size slot (shared with miniPCI-express)
    Networking
    Gigabit Ethernet connector
    USB
    3 x standard USB 2.0 Type A
    1 x USB OTG on micro-AB connector
    Internal USB for optional WiFi module
    PCI-e
    miniPCI-express slot, shared with mSATA (only PCI-e 1.1 and Gen2 are supported)
    Audio
    AC’97 Audio Codec

    Mic In, Line out internal pin header connector
    Serial Ports
    1 x RS-232 serial port
    TTL debug UART (Tx, RX only)
    CAN interface internal connector
    Other Interfaces
    I2C touch Connector
    Internal connector for power and reset buttons
    Power Supply
    +12VDC ± 10%
    Embedded additional RTC circuitry for lowest power consumption
    Optional RTC Battery with lead cable and connector
    Operating System
    Linux
    Operating Temperature

    0°C  ÷ +70 °C (commercial version)
    -40°C ÷ +85°C (industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    80 x 67 mm (3,15” x 2,64”)
    Software
    SECO WIKI
    • Visit seco wiki*
    BSP
    • SECO BSP*

    * User need to register to site before download reserved files. Please login if you are a registered user.

    SBC-984

    SBC-984
    • EVALUATE OUR PRODUCTS

      Max. 3 pcs per part number
    • SAMPLING PRICE

      Shipping costs included
    • BUSINESS TO BUSINESS ONLY

      Technical support provided exclusively to business
    SBC with NXP i.MX 6 Processor
    sku part number part number description part number configuration buy samples online Contattaci compare
    S984-4310-1000-C1-V SBC - NXP i.MX6 Quad @1.0 GHz (w/ GPU, VPU) SBC - NXP i.MX6 Quad @1.0 GHz (w/ GPU, VPU), 1GB DDR3L Dual Channel, 4GB eMMC, LowPower RTC - Commercial temp. range Confronta

    • Industrial Automation
    • Infotainment/Vending
    • Medical
    • Security/Surveillance
    • Transportation
    Top