SBC-C61

SBC with the NXP i.MX 8M Mini Processors

Status prodotto

Development
Sampling
Production

Contattaci per maggiori informazioni o quotazioni

CPU

NXP i.MX 8M Mini Family

Graphics

GC320 2D accelerator + GCNanoUltra 3D accelerator

Connectivity

Up to 2x GbE; opt Wifi; up to 2x RS-232 or RS-485 or CAN; opt LTE Cat4 Modem with SIM slot or eSIM

Memory

Soldered on-board LPDDR4-3000 memory

Dettaglio prodotto

Caratteristiche tecniche

  • Description
    3.5” SBC with the NXP i.MX 8M Mini Processors
  • Processor

    NXP i.MX 8M Mini Family based on ARM® Cortex®-A53 cores + general purpose Cortex®-M4 400MHz processor:


    i.MX 8M Mini Quad – Full featured, 4x Cortex®-A53 cores up to 1.8GHz
    i.MX 8M Mini Dual – Full featured, 2x Cortex®-A53 cores up to 1.8GHz
    i.MX 8M Mini Solo – Full featured, 1x Cortex®-A53 cores up to 1.8GHz
    i.MX 8M Mini Quad Lite – 4x Cortex®-A53 cores up to 1.8GHz, no VPU
    i.MX 8M Mini Dual Lite – 2x Cortex®-A53 cores up to 1.8GHz, no VPU
    i.MX 8M Mini Solo Lite – 1x Cortex®-A53 cores up to 1.8GHz, no VPU 

  • Max Cores
    4+1
  • Memory

    Soldered-down LPDDR4 memory, up to 4GB total, 32-bit interface

  • Graphics

    GC320 2D accelerator + GCNanoUltra 3D accelerator Embedded VPU (not for Lite processors), able to offer:
    VP9, HEVC/H.265, AVC/H.264, VP8 HW Decoding
    AVC/H.264, VP8 HW encoding


    OpenGL ES 2.0, OpenVG 1.1 support

  • Video Interfaces

    LVDS Single/Dual Channel connector or eDP connector (factory alternatives)
    MIPI-CSI Camera interface connector

  • Video Resolution

    Up to 1920x1080p60, 24bpp

  • Mass Storage

    2Kb I2C Flash
    MicroSD slot
    Optional internal SPI flash (shared with GPIOs and serial ports)
    QSPI Flash

  • Networking

    2x GbEthernet interfaces (1 optional)
    Optional WiFi 802.11 a/b/g/n/ac +BT LE 4.2 module
    Optional soldered on-board LTE Cat 4 Modem with SIM slot or eSIM

  • USB

    2x USB 2.0 Host ports on Type-A socket
    2x USB 2.0 Host ports on internal pin header
    1x USB OTG port on micro-AB connector (interface shared with the optional on-board modem)

  • Audio

    Digital Mic In connector (2x PDM inputs)
    Amplified mono Speaker Output

  • Serial Ports

    Up to 2x RS-232 or RS-485 or CAN Serial ports (factory options, shared with GPIOs and SPI interfaces)
    2x Debug UARTS

  • Other Interfaces

    I/O Connectors with:
    • 2xPWM @3.3V
    • GP I2C interface @3.3V
    • 1x Open Drain output (max 12V)
    • 2x GPIOs @3.3V 
    • 1xRS-232 or 1x RS-485 or 4x GPIOs / 1x UART or 1x CAN (factory options)
    • 1xRS-232 or 1x RS-485 or 4x GPIOs / 1x UART or 1x CAN + on-board ultra-low power RTC (factory options)
    Watchdog 
    Dedicated connector for I2C Touch Screen Controller Support 
    Optional Accelerometer + Magnetometer on-board 
    Onboard Buzzer 
    Optional Ultra Low Power RTC

  • Power Supply

    +12VDC÷ +24VDC

  • Operating System

    Wind River Linux
    Yocto
    Android

  • Operating Temperature

    -20°C ÷ +60°C (extended version)


    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

  • Dimensions
    146x102 mm (3.5" form factor)

Part Number

  • The ordering code for samples will be available soon.

    Part number description
    If you are interested in this product please contact us
    Contact us for more informations or quotes
    CONTATTACI