3.5” SBC with the NXP i.MX 8M Applications Processors

Status prodotto


Contattaci per maggiori informazioni o quotazioni


NXP i.MX 8M Family


Vivante GC7000Lite GPU


WiFi ac/a/b/g/n + BT LE 5; M.2 WWAN slot; microSIM slot for M.2 modem


Soldered down DDR3L memory

Dettaglio prodotto

Caratteristiche tecniche

  • Description
    SBC-C20 is an SBC built upon the NXP i.MX 8M Application Processors characterised by HEVC/VP9 decoding in 4Kp60 as well as HDR. As for the memory, it features a DDR3L RAM. Moreover, it provides an optimized IoT stack with preinstalled Wind River Linux 10. The range of connectivity options is particularly broad, with optional Wi-Fi and BT LE 4.2 module, M.2 socket 2 Key B for WWAN modules. Interestingly, it also features a Cortex-M4 for RTOS, the real-time operating system for serving real-time applications that process data as it comes in without buffer delays.
  • Processor

    NXP i.MX 8M Family, based on ARM® Cortex®-A53 MPCore + Cortex-M4 core platform:
    i.MX 8M Quad - Quad core up to 1.5GHz
    i.MX 8M QuadLite - Quad core up to 1.5 GHz per core
    i.MX 8M Dual - Dual core up to 1.5 GHz per core 

  • Max Cores
  • Memory

    Soldered down DDR3L memory, up to 2GB

  • Graphics

    Vivante GC7000Lite GPU, supporting OpenGL ES 1.1 / 2.0 / 3.0 / 3.1, Open CL 1.2 and Vulkan
    Dedicated VPU (not for QuadLite), supporting 4Kp60 HEVC/H.265 main and main 10 decoder, 4Kp60 VP9 decoder, 4Kp30 AVC/H.264 decoder, 1080p60 MPEG-2, MPEG-4p2, VC-1, VP8, RV9, AVS, MJPEG, H.263 decoder
    Dual Display support

  • Video Interfaces

    embedded Display Port 1.4 connector (switched with HDMI)
    Optional LVDS interface
    Optional HDMI 1.4 / 2.0a interface (switched with eDP)
    4-lane MIPI_CSI Camera interface

  • Video Resolution

    HDMI, eDP: up to 4096x2160
    LVDS: up to 1920x1080 

  • Mass Storage

    Optional eMMC drive on-board, up to 16GB
    microSD Card slot

  • Networking

    Optional WiFi ac/a/b/g/n + BT 5 module with onboard U.FL antenna connectors
    Gigabit Ethernet port
    M.2 Socket 2 2260 / 3042 Key B slot for WWAN modules (modem)

  • USB

    USB Device on USB 2.0 micro-AB connector (interface shared with USB 3.0 port)
    USB 3.0 Type-A connector (interface shared with USB 2.0 micro-AB)
    USB 2.0 Dual Type-A connector
    Optional USB 2.0 internal T/S connector (excludes one USB 2.0 Type-A interface)

  • Audio

    I2S Audio Codec
    Speaker + Microphone + Earphone interfaces on internal pin headers
    Line Out + Mic In combo TRRS audio jack
    Optional 10W for channel amplified Speaker connector

  • Serial Ports

    RS-232 Serial port connector
    Debug UART on internal pin header
    CAN Port

  • Other Interfaces

    microSIM slot for M.2 modems
    SPI interface
    I2C Touch Screen dedicated connector
    8 x GPI/Os connector
    SPI Connector

  • Power Supply

    Coin cell battery for RTC

  • Operating System


  • Operating Temperature

    0°C ÷ +60°C (Commercial version)

    -40°C ÷ +85°C (Industrial version, only boards without optional WiFi module)


    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

  • Dimensions
    101.6 x 147 mm (4” x 5.78”)


Part Number

  • EC20-4223-2648-C0

    Part number description
    SBC-C20 w/i.MX 8M core Quad 1.5 GHz, RAM 2GB, eMMC 8GB, LVDS Bridge + Video Output HDMI and eDP, I2S codec Audio With TRRSjack , 10W Audio Amplifier, HUB USB, SDIO Bridge, Wi-Fi Wilink module, UART RS-232, CSI camera connector Range Comm.
    Contact us for more informations or quotes

Related Products

SBC-C20 Heat Spreader (PASSIVE)
Visualizza Prodotto