Carrier-Q7-A42

Name: Carrier-Q7-A42
Price: 166.93 EUR
Availability: OutOfStock

Qseven® rel. 2.0 Compliant Carrier Board on 3.5” Form factor . (Formerly CQ7-A42)

Disponibile nell'intervallo di temperatura industriale

Data sheet

Wiki

Contattaci per maggiori informazioni e per preventivi

Contattaci

Dettagli Prodotto

Informazioni tecniche

Descrizione	The Qseven® Carrier-Q7-A42 is a full featured carrier board for Qseven® Rel. 2.0 compliant CPU modules, in 3.5” form factor. This carrier board can be used with any Qseven® Rel. 2.0 compliant module without incompatibilities and/or loss of functionalities. The board has been specifically designed for taking advantage of all possible features that can be offered by x86 and/or ARM architectures on Qseven® modules. SECO Carrier-Q7-A42 has been developed most of all as a development board to explore the possibilities offered by Qseven® modules, but it could also be a good solution for low volumes production for companies that do not want or need to develop customised carrier board.
Interfacce video	LVDS Dual Channel 24-bit + backlight connectors or 2xeDP Connectors DP++ or HDMI® connector
Memoria di massa	1 x S-ATA with HDD Power connector 1 x mSATA Slot microSD Slot on combo microSD + SIM connector
Rete	Up to 2 x Gigabit Ethernet connectors
USB	1 x USB 3.0 Host port on Type-A socket 2 x USB 2.0 Host ports on double Type-A sockets 2 x USB 2.0 Host ports on internal pin header 1 x USB 2.0 OTG ports on micro-AB socket (USB Port shared with miniPCI-e slot)
Pci	miniPCI-e slot Full/Half size, combined with SIM card slot
Audio	Audio interface on internal pin header
Porte seriali	4-wires RS-232/RS-422/RS-485 configurable serial port on DB9 male connector 2 x RS-232 Full-modem serial ports on internal header (needs LPC interface from Qseven module) CAN interface on PCB terminal block
Altre interfacce	SPI internal pin header LPC Bus internal pin header SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header Front Panel Header 1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management) +12V Tachometric FAN connector Optional Debug USB port on mini-B Socket Optional MFG connector for JTAG programming of Qseven® module
Dispositivo di alimentazione	+12VDC Mini-fit Standard ATX power connector Coin cell battery Holder for CMOS and RTC
Temperatura operativa	-40°C ÷ +85°C (industrial range) *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensioni	146 x 102 mm (5,75” x 4,02”)

Software

Link	SECO Technical Resources

Documentazione

Data Sheet	[Datasheet] Carrier-Q7-A42 Rel 2.4
Manual	[Schematics] CQ7-A42 Rel 1.2 [Manual] CQ7-A42 Rel 2.0
Image	[Picture] CQ7-A42_front [Picture] CQ7-A42_perspective

Part Number

Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.

Elementi prodotti raggruppati
QA42-0000-1111-I0-V 182,20 €	Descrizione Part Number CQ7-A42 - Carrier Board for Qseven® rel. 2.0 Compliant modules on 3.5" Form factor - DisplayPort - 2nd Ethernet Port - LVDS - Debug Port	Contattaci
QA42-0000-2111-I0-V	Descrizione Part Number CQ7-A42 - Carrier Board for Qseven® rel. 2.0 Compliant modules on 3.5" Form factor - HDMI - 2nd Ethernet Port - LVDS - Debug Port	Contattaci
QA42-0001-1111-I0-V	Descrizione Part Number Q7 - CQ7-A42 - Carrier Board for Qseven® rel. 2.0 Compliant modules on 3.5" Form factor - clip miniPCI Exp Half-Size - DisplayPort - 2nd Ethernet Port - LVDS - Debug Port	Contattaci