Benvenuti nel sito SECO S.p.A.

×

Inscription

Informations compte

  • Données de connexion

    ou se connecter

    Prénom obligatoire!
    Nom obligatoire!
    Numéro fiscal obligatoire!
    Société obligatoire!
    Numéro de TVA obligatoire!
    Pays obligatoire!
    Prénom non valide!
    Nom non valide!
    Ce n'est pas une adresse email!
    Adresse email obligatoire!
    Cet email existe déjà!
    Mot de passe obligatoire!
    Saisir un mot de passe valide!
    Saisir au moins 6 caractères!
    Saisir au maximum 16 caractères!
    Les mots de passe ne sont pas les mêmes!
    Termes et conditions obligatoires!
    Email ou mot de passe incorrect!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleasecliquez ici

    μQ7-A75-J

    μQseven® standard module with NXP i.MX 6 Processor

    • Single and Dual Core Lite (ARM Cortex™A9 Cores)
    • FastEthernet; GPI/Os
    • 2D/3D dedicated graphics processors
    • up to 1GB DDR3L on-board
    Disponible dans la plage des températures industrielles

      μQ7-A75-J

    μQ7-A75-J

    SYS-A62-10

    SYS-A62-10

    Q7-C26

    Q7-C26

    μQ7-962

    μQ7-962

     
    Statut de développement du produit
    Processeur

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors

    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core

    Multicore NXP i.MX 6 processor family
    SYS-A62-10/SOLO: i.MX6S Solo, 1 x ARM Cortex-A9 @1 GHz Core
    SYS-A62-10/LITE: i.MX6DL Dual Lite, 2 x ARM Cortex-A9 @1 GHz Cores
    SYS-A62-10/QUAD: i.MX6Q Quad, 4 x ARM Cortex-A9 @1 GHz Cores

    NXP i.MX 8 Family:
    i.MX 8QuadMax - 2x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores
    i.MX 8QuadPlus - 1x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores
    i.MX 8Quad - 4x Cortex®-A53 cores + 2x Cortex®-M4F cores

    NXP i.MX 6 Family, based on ARM® CORTEX® -A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core
    Puces
    ...
    ...
    ...
    ...
    Max Cores
    2
    0
    0
    4
    Max Thread
    ...
    0
    0
    0
    Mémoire

    Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F

    On-board DDR3L soldered memory;
    SYS-A62-10/SOLO: 512MB 32-bit
    SYS-A62-10/LITE: 1GB 64-bit
    SYS-A62-10/QUAD: 1GB 64-bit

    soldered down LPDDR4-3200 memory, 64-bit interface

    up to 2GB DDR3L on-board (up to 1GB with i.MX6S)
    Graphique

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Supports 2 independent displays

    2D, OpenGL® ES2.0 3D HW accelerator
    OpenVG™ accelerator (SYS-A62/10/QUAD only)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX

    Integrated Graphics Processing Unit, supports 2 independent displays.
    Embedded VPU, supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-2, VC-1, RV9, VP8, H.263 and MPEG4 part, HW encoding of AVC/H.264
    Supports OpenGL ES 3.1, Open CL 1.2, OpenGL 3.x, DirectX 11

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q)
    Supports up to 3 independent displays with i.MX6D and i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S
    Interfaces vidéo

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface

    10,1” LVDS display, resolution 1280 x 800, 30K hours life
    P-Cap (Projected Capacitive touch screen), with 2mm glass cover
    Glass Hardness IK08, Surface Hardness 8H (450g)

    HDMI 2.0a or DP 1.3 interface, supporting HDCP 2.2
    Dual Channel or 2 x Single Channel 18- / 24-bit LVDS interface

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4
    Résolution vidéo

    LVDS, resolution up to 1920x1200
    HDMI, resolution up to 1080p

    ...
    HDMI:Up to 4Kp60
    LVDSUp to 1080p
    HDMI, up to 1080p
    LVDS, up to 1920x1200
    Stockage de masse

    On-board eMMC drive, up to 8 GB
    SD / MMC / SDIO interface
    Internal SPI Flash for booting

    On-board 4GB eMMC drive
    microSD Card Slot
    SATA Connector (SYS-A62-10/QUAD only)

    1x SATA Gen3 interface (alternative to 1x PCI-e x1 port)
    eMMC 5.1 drive soldered on-board
    SD 4-bit interface
    QSPI Flash soldered-on-board

    Up to 8 GB eMMC drive soldered onboard
    SD / MMC / SDIO interface
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)
    Networking
    Fast Ethernet (10/100) interface
    Gigabit Ethernet connector
    Optional WiFi pluggable module

    1 x Gigabit Ethernet interface

    Gigabit Ethernet interface
    USB

    1 x USB OTG interface
    1 x USB 2.0 Host interface

    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port

    4 x USB 2.0 Host Ports 
    1 x USB 3.0 Host Port
    1 x USB 2.0 OTG port

    1 x USB OTG interface
    4 x USB 2.0 Host interfaces
    PCI-e

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    ...

    Up to 2x PCI-e x1 Gen3 ports

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
    Audio
    I2S / AC’97 Audio Interface
    SYS-A62-10/LITE and SYS-A62-10/QUAD: Realtek ALC655
    AC’97 Audio Codec with Mic-In, Line-Out audio Jacks

    I2S Audio Interface

    I2S / AC’97 Audio Interface
    Ports série
    ...
    Dedicated Serial ports:
    SYS-A62-10/SOLO: 2 x RS-232 ports 
    SYS-A62-10/LITE: 2 x RS-232 ports, 1 x CAN port
    SYS-A62-10/QUAD: 2 x RS-232 ports, 1 x RS-485 port, 1 x CAN port

    Other serial ports can be realised on expansion connector (see ""Other interfaces"")

    1x UART Tx/Rx/RTS/CTS
    1x CAN Bus (TTL level)

    2 x Serial ports (TTL interface)
    CAN port interface
    Autres interfaces

    On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
    - Additional SD interface
    - Up to 4 UARTs
    - CAN interface
    - Watchdog(s)
    - I2C interfaces
    - PWM outputs
    - SPI interface
    - Additional Audio interface

    (*) not all the combinations are allowed simultaneously Power Management Signals

    MIPI-CSI Camera connector
    Programmable expansion connector with:
    SYS-A62-10/SOLO: up to 22 GPIOs, 2 x TTL CAN ports, 1 x UART TTL, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    SYS-A62-10/LITE: up to 20 GPIOs, 1 x TTL CAN port, 1 x UART TTL, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    SYS-A62-10/QUAD: up to 18 GPIOs, 1 x TTL CAN port, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces

    CSI camera connector
    2x I2C Bus
    SPI interface
    8 x GPI/Os
    Boot select signal
    Power Management Signals
    Watchdog

    I2C Bus
    SM Bus
    Power Management Signals
    Alimentation électrique

    +5VDC ± 5%
    Optional Low Power RTC

    +12VDC
    SYS-A62-10/SOLO and SYS-A62-10/LITE: internal i.MX6 RTC, require external battery for time/data retention
    SYS-A62-10/QUAD: low power RTC with on-board battery

    +5VDC ± 5%
    +3.3V_RTC

    +5VDC ± 5%
    Consommation d'énergie
    ...
    ...
    ...
    ...
    Système d'exploitation

    Linux
    Yocto

    Linux
    Yocto
    Windows® Embedded Compact 7

    Linux
    Android

    Linux
    Yocto
    Température d'exploitation

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (Industrial temp.)* 

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ 50°C

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C (Industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +60°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    40x70 mm (1.57” x 2.76”)
    269,60 x 189,20 x 17,17 mm
    70x70 mm (2.76” x 2.76”)
    40x70 mm (μQseven, 1.57” x 2.76”)
    Security
    ...
    ...
    ...
    ...
    BIOS
    ...
    ...
    ...
    ...
    Embedded Controller Functionalities
    ...
    ...
    ...
    ...

    Description

    Détails

    The extremely low power and low cost μQseven Rev. 2.0 Compliant Module with the NXP i.MX 6 Processor features all the processor and integrated native I/O capabilities of the SoC, in compliance with the Qseven standard, at the competitive cost of a proprietary module. This board is supplied with a complete and fully-featured BSP, for easy migration from, and to, the entire i.MX 6 product family, along with dedicated hardware and software development support.
    Informations supplémentaires

    Informations complémentaires

    Processeur

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors

    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core

    Max Cores
    2
    Mémoire

    Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F

    Graphique

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Supports 2 independent displays

    Interfaces vidéo

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface

    Résolution vidéo

    LVDS, resolution up to 1920x1200
    HDMI, resolution up to 1080p

    Interfaces vidéo
    SINGLE CHANNEL LVDS, DUAL CHANNEL LVDS, HDMI
    Stockage de masse

    On-board eMMC drive, up to 8 GB
    SD / MMC / SDIO interface
    Internal SPI Flash for booting

    Networking
    Fast Ethernet (10/100) interface
    USB

    1 x USB OTG interface
    1 x USB 2.0 Host interface

    PCI-e

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    Audio
    I2S / AC’97 Audio Interface
    Autres interfaces

    On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
    - Additional SD interface
    - Up to 4 UARTs
    - CAN interface
    - Watchdog(s)
    - I2C interfaces
    - PWM outputs
    - SPI interface
    - Additional Audio interface

    (*) not all the combinations are allowed simultaneously Power Management Signals

    Alimentation électrique

    +5VDC ± 5%
    Optional Low Power RTC

    Système d'exploitation

    Linux
    Yocto

    Température d'exploitation

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (Industrial temp.)* 

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    40x70 mm (1.57” x 2.76”)
    Logiciel

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Documents

    * User need to register to site before download reserved files. Please login if you are a registered user.

    μQ7-A75-J

    μQ7-A75-J
    • ÉVALUER NOS PRODUITS

      Max. 3 pcs par code article
    • PRIX ÉCHANTILLONNAGE

      Frais d'expédition inclus
    • UNIQUEMENT B2B

      Support technique fourni exclusivement pour les entreprises
    μQseven® standard module with NXP i.MX 6 Processor
    Code article SKU Description article Configuration article Acheter des échantillons en ligne Nous contacter comparer
    QA75-1110-1000-I0 µQ7 - NXP i.MX6 Solo @800MHz (w/ GPU,VPU) µQ7 - NXP i.MX6 Solo @800MHz (w/ GPU,VPU), 256MB DDR3L Single Channel, 4GB eMMC, Ultra Low Power RTC - Industrial temp. range AJOUTER POUR COMPARER

    • Automatisation des bâtiments
    • Automatisation industrielle
    • IdO
    • Infodivertissement
    • Utilities (Energy-Telco)
    Top