Benvenuti nel sito SECO S.p.A.

×

Inscription

Informations compte

  • Données de connexion

    ou se connecter

    Prénom obligatoire!
    Nom obligatoire!
    Numéro fiscal obligatoire!
    Société obligatoire!
    Numéro de TVA obligatoire!
    Pays obligatoire!
    Prénom non valide!
    Nom non valide!
    Ce n'est pas une adresse email!
    Adresse email obligatoire!
    Cet email existe déjà!
    Mot de passe obligatoire!
    Saisir un mot de passe valide!
    Saisir au moins 6 caractères!
    Saisir au maximum 16 caractères!
    Les mots de passe ne sont pas les mêmes!
    Termes et conditions obligatoires!
    Email ou mot de passe incorrect!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleasecliquez ici

    μQ7-962

    μQseven® standard module with NXP i.MX 6 Processor

    • Single-, Dual- and Quad- Core (ARM® Cortex® -A9 Cores)
    • 4x USB 2.0; 2x Serial ports; CAN Bus
    • 2D/3D dedicated graphics processors
    • up to 2GB DDR3L on-board
    Disponible dans la plage des températures industrielles

      μQ7-962

    μQ7-962

    μQ7-A75-J

    μQ7-A75-J

    SM-C12

    SM-C12

    Q7-C26

    Q7-C26

     
    Statut de développement du produit
    Processeur
    NXP i.MX 6 Family, based on ARM® CORTEX® -A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors

    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core

    NXP i.MX 8M Family based on ARM Cortex®-A53 cores + general purpose Cortex®-M4 processor:
    i.MX 8M Quad - 4x Cortex®-A53 cores up to 1.5GHz
    i.MX 8M Dual - 2x Cortex®-A53 cores up to 1.5GHz
    i.MX 8M QuadLite - 4x Cortex®-A53 cores up to 1.5GHz, no VPU 

    NXP i.MX 8 Family:
    i.MX 8QuadMax - 2x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores
    i.MX 8QuadPlus - 1x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores
    i.MX 8Quad - 4x Cortex®-A53 cores + 2x Cortex®-M4F cores

    Puces
    ...
    ...
    ...
    ...
    Max Cores
    4
    2
    0
    0
    Max Thread
    0
    ...
    0
    0
    Mémoire
    up to 2GB DDR3L on-board (up to 1GB with i.MX6S)

    Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F

    Soldered Down LPDDR4-3200 memory, 32-bit interface, up to 4GB

    soldered down LPDDR4-3200 memory, 64-bit interface

    Graphique
    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q)
    Supports up to 3 independent displays with i.MX6D and i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Supports 2 independent displays

    Integrated Graphics Processing Unit, supports 2 independent displays
    Embedded VPU, supports HW decoding of HEVC (H.265), H.264, H.263, MPEG-4, MPEG-2, AVC, VC-1, RV, DivX, VP6, VP8, VP9, JPEG
    Supports OpenGL ES 3.1, Open CL 1.2. OpenGL 2.X, Vulkan, DirectX, Open VG 1.1

    Integrated Graphics Processing Unit, supports 2 independent displays.
    Embedded VPU, supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-2, VC-1, RV9, VP8, H.263 and MPEG4 part, HW encoding of AVC/H.264
    Supports OpenGL ES 3.1, Open CL 1.2, OpenGL 3.x, DirectX 11

    Interfaces vidéo
    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface

    HDMI 2.0a interface, supporting HDCP 2.2 and HDCP 1.4
    18- / 24-bit Dual Channel LVDS interface or MIPI-DSI interface
    (factory alternatives)

    HDMI 2.0a or DP 1.3 interface, supporting HDCP 2.2
    Dual Channel or 2 x Single Channel 18- / 24-bit LVDS interface

    Résolution vidéo
    HDMI, up to 1080p
    LVDS, up to 1920x1200

    LVDS, resolution up to 1920x1200
    HDMI, resolution up to 1080p

    HDMIUp to 4096 x 2160 @ 60 (4K)
    MIPI-DSI, LVDSUp to 1920 x 1080 @ 60Hz
    HDMI:Up to 4Kp60
    LVDSUp to 1080p
    Stockage de masse
    Up to 8 GB eMMC drive soldered onboard
    SD / MMC / SDIO interface
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)

    On-board eMMC drive, up to 8 GB
    SD / MMC / SDIO interface
    Internal SPI Flash for booting

    Optional SD 4-bit interface
    QSPI Flash soldered-onboard
    eMMC 5.0 drive soldered on-board

    1x SATA Gen3 interface (alternative to 1x PCI-e x1 port)
    eMMC 5.1 drive soldered on-board
    SD 4-bit interface
    QSPI Flash soldered-on-board

    Networking
    Gigabit Ethernet interface
    Fast Ethernet (10/100) interface
    1 x Gigabit Ethernet interface
    Optional WiFi + BT LE module onboard

    1 x Gigabit Ethernet interface

    USB
    1 x USB OTG interface
    4 x USB 2.0 Host interfaces

    1 x USB OTG interface
    1 x USB 2.0 Host interface

    2 USB 3.0 Host ports
    2 USB 2.0 Host ports
    1 USB 2.0 OTG port

    4 x USB 2.0 Host Ports 
    1 x USB 3.0 Host Port
    1 x USB 2.0 OTG port

    PCI-e
    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    2x PCI-e x1 ports

    Up to 2x PCI-e x1 Gen3 ports

    Audio
    I2S / AC’97 Audio Interface
    I2S / AC’97 Audio Interface
    I2S Audio Interface

    I2S Audio Interface

    Ports série
    2 x Serial ports (TTL interface)
    CAN port interface
    ...
    Up to 2x UART Tx/Rx/RTS/CTS
    2x UART Tx/Rx
    1x CAN Bus (TTL level)

    1x UART Tx/Rx/RTS/CTS
    1x CAN Bus (TTL level)

    Autres interfaces
    I2C Bus
    SM Bus
    Power Management Signals

    On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
    - Additional SD interface
    - Up to 4 UARTs
    - CAN interface
    - Watchdog(s)
    - I2C interfaces
    - PWM outputs
    - SPI interface
    - Additional Audio interface

    (*) not all the combinations are allowed simultaneously Power Management Signals

    1x 4-lanes + 1x 2-lanes CSI camera interfaces
    I2C Bus
    SM Bus
    2x SPI interfaces
    QuadSPI interface
    12 x GPI/Os
    Boot select signals
    Power Management Signals

    CSI camera connector
    2x I2C Bus
    SPI interface
    8 x GPI/Os
    Boot select signal
    Power Management Signals
    Watchdog

    Alimentation électrique
    +5VDC ± 5%

    +5VDC ± 5%
    Optional Low Power RTC

    +5VDC
    +3.3V_RTC

    +5VDC ± 5%
    +3.3V_RTC

    Consommation d'énergie
    ...
    ...
    ...
    ...
    Système d'exploitation
    Linux
    Yocto

    Linux
    Yocto

    Linux
    Android

    Linux
    Android

    Température d'exploitation

    0°C ÷ +60°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (Industrial temp.)* 

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C (Industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C (Industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    40x70 mm (μQseven, 1.57” x 2.76”)
    40x70 mm (1.57” x 2.76”)
    50 x 82 mm (1.97” x 3.23”)
    70x70 mm (2.76” x 2.76”)
    Security
    ...
    ...
    ...
    ...
    BIOS
    ...
    ...
    ...
    ...
    Embedded Controller Functionalities
    ...
    ...
    ...
    ...

    Description

    Détails

    μQ7-962 is a Qseven® Rel. 2.0 Compliant Module designed by SECO that offers top computational and graphical performances given by low-power consuming ARM architecture.
    The board integrates i.MX 6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex® A9 ARM Core (up to Quad Core processors), ideal for applications requiring multimedia capabilities and/or high levels of parallel computing.
    All this comes in the μQseven form factor, just 40x70mm, introduced with the Qseven® specifications Rel. 2.0.
    Informations supplémentaires

    Informations complémentaires

    Processeur
    NXP i.MX 6 Family, based on ARM® CORTEX® -A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core
    Max Cores
    4
    Mémoire
    up to 2GB DDR3L on-board (up to 1GB with i.MX6S)
    Graphique
    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q)
    Supports up to 3 independent displays with i.MX6D and i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S
    Interfaces vidéo
    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4
    Résolution vidéo
    HDMI, up to 1080p
    LVDS, up to 1920x1200
    Interfaces vidéo
    SINGLE CHANNEL LVDS, DUAL CHANNEL LVDS, HDMI
    Stockage de masse
    Up to 8 GB eMMC drive soldered onboard
    SD / MMC / SDIO interface
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)
    Networking
    Gigabit Ethernet interface
    USB
    1 x USB OTG interface
    4 x USB 2.0 Host interfaces
    PCI-e
    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
    Audio
    I2S / AC’97 Audio Interface
    Ports série
    2 x Serial ports (TTL interface)
    CAN port interface
    Autres interfaces
    I2C Bus
    SM Bus
    Power Management Signals
    Alimentation électrique
    +5VDC ± 5%
    Système d'exploitation
    Linux
    Yocto
    Température d'exploitation

    0°C ÷ +60°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    40x70 mm (μQseven, 1.57” x 2.76”)
    Logiciel
    SECO WIKI
    Linux
    • SECO BSP*
    Linux-YOCTO
    • Yocto meta SECO BSP release Guideline*

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Documents

    * User need to register to site before download reserved files. Please login if you are a registered user.

    μQ7-962

    μQ7-962
    • ÉVALUER NOS PRODUITS

      Max. 3 pcs par code article
    • PRIX ÉCHANTILLONNAGE

      Frais d'expédition inclus
    • UNIQUEMENT B2B

      Support technique fourni exclusivement pour les entreprises
    μQseven® standard module with NXP i.MX 6 Processor
    Code article SKU Description article Configuration article Acheter des échantillons en ligne Nous contacter comparer
    Q962-B120-0000-C1 µQ7 - NXP i.MX6 DualLite @1GHz (w/ GPU,VPU) µQ7 - NXP i.MX6 DualLite @1GHz (w/ GPU,VPU), 1GB DDR3L Single Channel, 4GB eMMC, Ultra Low Power RTC, 8Mb SPI Flash - Commercial temp. range AJOUTER POUR COMPARER

    • Automatisation des bâtiments
    • Automatisation industrielle
    • Infodivertissement
    • Instruments de mesure
    • Médical
    Top