Benvenuti nel sito SECO S.p.A.

×

Inscription

Informations compte

  • Données de connexion

    ou se connecter

    Prénom obligatoire!
    Nom obligatoire!
    Numéro fiscal obligatoire!
    Société obligatoire!
    Numéro de TVA obligatoire!
    Pays obligatoire!
    Prénom non valide!
    Nom non valide!
    Ce n'est pas une adresse email!
    Adresse email obligatoire!
    Cet email existe déjà!
    Mot de passe obligatoire!
    Saisir un mot de passe valide!
    Saisir au moins 6 caractères!
    Saisir au maximum 16 caractères!
    Les mots de passe ne sont pas les mêmes!
    Termes et conditions obligatoires!
    Email ou mot de passe incorrect!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleasecliquez ici

    Plus de vues

    SBC-C23

    Smart Edge Compute Unit based on NXP i.MX 6SoloX Processor

    • NXP i.MX6SX SoloX

    • 2x Fast Eth; WiFi; BLE; 3x Multicolor Signalling LEDs; 1x RS-232 port; 1x RS-485 port; 2x CAN port
    • Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    • 32-bit DDR3L memory soldered onboard

    Disponible dans la plage des températures industrielles

      SBC-C23

    SBC-C23

    SBC-B08

    SBC-B08

    SBC-A62-J

    SBC-A62-J

     
    Statut de développement du produit
    Processeur

    NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

    NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
    SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
    SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
    SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
    SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

    Puces
    ...
    ...
    ...
    Max Cores
    ...
    1 + 1
    4
    Longueur filet max
    ...
    ...
    0
    Mémoire

    32-bit DDR3L memory soldered onboard, up to 1GB

    Soldered on-board DDR3L memory, 32-bit interface
    SYS-B08-BASIC/D: 512MB
    SYS-B08-FULL/D: 1GB

    Soldered on-board DDR3L memory***:
    SBC-A62-J-SOLO: 512MB 32-bit interface
    SBC-A62-J-LITE: 1GB 64-bit interface
    SBC-A62-J-PLUS: 2GB 64-bit interface
    SBC-A62-J-QUAD: 1GB 64-bit interface

    *** For additional configurability please contact SECO

    Graphique

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
    OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
    SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

    Interfaces vidéo

    Optional Single Channel 18- / 24- bit LVDS connector w/ Touch Screen (I2C signals)
    Max resolution 1366x768 @60 Hz, 24bpp

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
    HDMI interface 1.4

    Résolution vidéo
    ...

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    HDMI: up to 1920 x 1080p
    LVDS: up to 1920 x 1200

    Stockage de masse

    8GB eMMC drive on-board
    μSD Card slot

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    4GB eMMC drive soldered onboard***
    microSD Card slot
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

    *** For additional configurability please contact SECO

    Networking

    2x Fast Ethernet RJ-45 ports
    WiFi (802.11 abgn) +BLE combo module with onboard antenna
    2G, LTE-CatM1 or LTE Cat1 Modem embedded on-board, with up to 2 external antennas
    microSIM slot + electronic SIM soldered on-board for the Modem
    M.2 Socket 1 Key E 2230 + M.2 Socket 2 Key B 2242 slot for connectivity

    SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector
    SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard

    Gigabit Ethernet connector
    Internal USB connector for Wi-Fi Module

    USB

    1 x USB 2.0 Type-A socket
    1 x USB 2.0 OTG on micro-AB connector

    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header
    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    PCI-e
    ...
    ...
    ...
    Audio

    On-board buzzer

    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header

    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
    AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

    Ports série

    All available on expansion connector:
    - 1 x RS-232 port
    - 1x RS-485 port
    - 2 x CAN port

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    Debug UART interface, TTL voltage level.
    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
    Other serial interfaces on the expansion connector:
    SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
    SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

    Autres interfaces

    3x Multicolor Signalling LEDs
    Reset Button
    Expansion PCB terminal block with:
    - 1x RS-232 port
    - 1x RS-485 port
    - 2x CAN port
    - 4x analog inputs
    - I2C
    - 2x PWM

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
    Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

    * Please note that some of these interfaces are factory options, other configurations are made via SW.

    Alimentation électrique

    +12VDC
    DC power jack and 2-poles PCB terminal block for voltage supply
    Optional Li-Ion Rechargeable battery

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    +12VDC; Additional embedded Low Power RTC;
    SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

    Consommation d'énergie
    ...
    ...
    ...
    Système d'exploitation

    Wind River Linux

    Linux

    - Free Android and Linux community BSP available at UDOO.org
    - SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
    - Yocto Guideline valid for SECO BSP

    Température d'exploitation

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C  (Industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)**
    For industrial temp. (-40°C ÷ +85°C)** please contact us

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    153 x 89,5 mm (6” x 3,5”)
    89.5 x 87 mm (3.52” x 3.43”)
    110 x 86.5 mm (4.5” x 3.7”)
    Security
    N/A
    ...
    N/A
    BIOS
    N/A
    ...
    N/A
    Embedded Controller Functionalities
    N/A
    ...
    N/A

    Description

    Détails

    The SYS-C23 is a Smart Edge Compute Unit, built on NXP i. MX 6SoloX Processor, enables multi core edge computing and networking, while ensuring wide connectivity. As far as memory is concerned, the device features a 32-bit DDR3L memory soldered on-board, up to 1 GB. When it comes to interfaces the board is plentiful: networking interfaces - such as 2x Fast Ethernet RJ-45 ports, Wifi, BT LE combo module with on-board antenna - but also other interfaces like 2x CAN port, 4x analog inputs, I2C, 2x PWM and many others. The device is indeed a multiprotocol bridging for industrial PLCs and smart factory devices. Fields of application include Home Automation, Industrial Internet of Things and Surveillance among the many.

    Informations supplémentaires

    Informations complémentaires

    Processeur

    NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

    Mémoire

    32-bit DDR3L memory soldered onboard, up to 1GB

    Graphique

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Interfaces vidéo

    Optional Single Channel 18- / 24- bit LVDS connector w/ Touch Screen (I2C signals)
    Max resolution 1366x768 @60 Hz, 24bpp

    Stockage de masse

    8GB eMMC drive on-board
    μSD Card slot

    Networking

    2x Fast Ethernet RJ-45 ports
    WiFi (802.11 abgn) +BLE combo module with onboard antenna
    2G, LTE-CatM1 or LTE Cat1 Modem embedded on-board, with up to 2 external antennas
    microSIM slot + electronic SIM soldered on-board for the Modem
    M.2 Socket 1 Key E 2230 + M.2 Socket 2 Key B 2242 slot for connectivity

    USB

    1 x USB 2.0 Type-A socket
    1 x USB 2.0 OTG on micro-AB connector

    Audio

    On-board buzzer

    Ports série

    All available on expansion connector:
    - 1 x RS-232 port
    - 1x RS-485 port
    - 2 x CAN port

    Autres interfaces

    3x Multicolor Signalling LEDs
    Reset Button
    Expansion PCB terminal block with:
    - 1x RS-232 port
    - 1x RS-485 port
    - 2x CAN port
    - 4x analog inputs
    - I2C
    - 2x PWM

    Alimentation électrique

    +12VDC
    DC power jack and 2-poles PCB terminal block for voltage supply
    Optional Li-Ion Rechargeable battery

    Système d'exploitation

    Wind River Linux

    Température d'exploitation

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C  (Industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    153 x 89,5 mm (6” x 3,5”)
    Logiciel

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Documents
    Data Sheet
    Image
    Manual
    • [Manual] SBC-C23 Rel 1.0*

    * User need to register to site before download reserved files. Please login if you are a registered user.

    SBC-C23

    SBC-C23
    • ÉVALUER NOS PRODUITS

      Max. 3 pcs par code article
    • PRIX ÉCHANTILLONNAGE

      Frais d'expédition inclus
    • UNIQUEMENT B2B

      Support technique fourni exclusivement pour les entreprises
    Smart Edge Compute Unit based on NXP i.MX 6SoloX Processor
    Code article SKU Description article Configuration article Acheter des échantillons en ligne Nous contacter comparer
    SC23-0130-0413-C0 SBC w/NXP i.MX 6SoloX IoT - SBC - i.MX 6SoloX, RAM 512MB, 1x Ethernet, Battery Li-Cell 2200 mAh + RTC, Battery EEMC (discharge +60°C), Wi-Fi/BT WL1831MOD + UFL connector, NO LTE (option on M.2) AJOUTER POUR COMPARER
    SC23-0211-2414-C0 SBC w/NXP i.MX 6SoloX IoT - SBC - i.MX 6SoloX, RAM 1GB, SIM-Card, 2x Ethernet, Modem LTE EG91 Cat-1, Battery Li-Cell 2200 mAh + RTC, Battery EEMC (discharge +60°C), WiFi/BT WL1837MOD + UFL connector. AJOUTER POUR COMPARER

    • Automatisation des bâtiments
    • Automatisation industrielle
    • IdO
    • Instruments de mesure
    • Sécurité/Surveillance
    Top