Benvenuti nel sito SECO S.p.A.

×

Inscription

Informations compte

  • Données de connexion

    ou se connecter

    Prénom obligatoire!
    Nom obligatoire!
    Numéro fiscal obligatoire!
    Société obligatoire!
    Numéro de TVA obligatoire!
    Pays obligatoire!
    Prénom non valide!
    Nom non valide!
    Ce n'est pas une adresse email!
    Adresse email obligatoire!
    Cet email existe déjà!
    Mot de passe obligatoire!
    Saisir un mot de passe valide!
    Saisir au moins 6 caractères!
    Saisir au maximum 16 caractères!
    Les mots de passe ne sont pas les mêmes!
    Termes et conditions obligatoires!
    Email ou mot de passe incorrect!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleasecliquez ici

    Plus de vues

    SBC-A80-eNUC

    SBC with the N-series Intel® Pentium® / Celeron® and x5-Series Atom™ SOCs in the embedded NUC™ form factor

    • N-series Intel® Pentium® and Celeron® SOCs
    • 2x GbE; CIR sensor; 8x GPI/Os
    • Integrated Graphics, three independent display support
    • 2 x DDR3L SO-DIMM Slots with Dual Channel Support, up to 8GB DDR3L-1600

      SBC-A80-eNUC

    SBC-A80-eNUC

    SBC-B08

    SBC-B08

    Q7-B03

    Q7-B03

    SBC-A62-J

    SBC-A62-J

     
    Statut de développement du produit
    Processeur
    Intel® Pentium® N3710, Quad Core @ 1.6GHz (Turbo Boost 2.56GHz), 2MB Cache, 6W TDP
    Intel® Celeron® N3160, Quad Core @ 1.6GHz (Turbo Boost 2.24GHz), 2MB Cache, 6W TDP
    Intel® Celeron® N3060, Dual Core @ 1.6GHz (Turbo Boost 2.48GHz), 2MB Cache, 6W TDP
    Intel® Celeron® N3010, Dual Core @ 1.04GHz (Turbo Boost 2.24GHz), 2MB Cache, 4W TDP
    Intel® Atom™ x5-E8000, Quad Core @ 1.04GHz (Turbo Boost 2.00GHz), 2MB Cache, 5W TDP
    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

    Intel® Atom™ x5-E3930 Dual Core @1.3 GHz (Burst 1.8GHz), 2MB L2 Cache, 6.5W TDP
    Intel® Atom™ x5-E3940 Quad Core @1.6 GHz (Burst 1.8GHz), 2MB L2 Cache, 9.5W TDP
    Intel® Atom™ x7-E3950 Quad Core @1.6 GHz (Burst 2.0GHz), 2MB L2 Cache, 12W TDP
    Intel® Pentium® N4200 Quad Core @1.1GHz (Burst 2.5GHz), 2MB L2 Cache, 6W TDP
    Intel® Celeron® N3350 Dual Core @1.1GHz (Burst 2.4GHz), 2MB L2 Cache, 6W TDP
    Intel® Celeron® J3455, Quad Core @1.5GHz (Burst 2.3GHz), 2MB L2Cache, 10W TDP
    Intel® Celeron® J3355, Dual Core @2.0GHz (Burst 2.5GHz), 2MB L2Cache, 10W TDP

    NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
    SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
    SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
    SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
    SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

    Puces
    ...
    ...
    ...
    ...
    Max Cores
    4
    1 + 1
    4
    4
    Longueur filet max
    4
    ...
    4
    0
    Mémoire
    2 x DDR3L SO-DIMM Slots with Dual Channel Support,
    up to 8GB DDR3L-1600

    Soldered on-board DDR3L memory, 32-bit interface
    SYS-B08-BASIC/D: 512MB
    SYS-B08-FULL/D: 1GB

    Dual Channel Soldered Down DDR3L-1866 memory, up to 8GB

    Soldered on-board DDR3L memory***:
    SBC-A62-J-SOLO: 512MB 32-bit interface
    SBC-A62-J-LITE: 1GB 64-bit interface
    SBC-A62-J-PLUS: 2GB 64-bit interface
    SBC-A62-J-QUAD: 1GB 64-bit interface

    *** For additional configurability please contact SECO

    Graphique
    Integrated Graphics
    Three independent display support
    HW decoding of HEVC(H.265), H.264, MPEG2, MVC, VC-1, VP8, WMV9, JPEG/MJPEG formats
    HW encoding of H.264, MVC and JPEG/MPEG formats

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Integrated Gen9-LP Graphics controller, with 18 Execution Units
    4K HW decoding and encoding of HEVC(H.265), H.264, VP8,
    SVC, MVC

    Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
    OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
    SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

    Interfaces vidéo

    HDMI connector
    miniDP++ connector
    embedded Display Port (eDP) internal connector

     

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    eDP interface or Single/Dual Channel 18/24bit LVDS interface
    through eDP-to-LVDS bridge
    HDMI or DP++ interface

    1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
    HDMI interface 1.4

    Résolution vidéo
    HDMI, DP: up to 3840x2160 24bpp @ 30Hz, 2560x1600 24bpp @ 60Hz
    eDP: up to 2560x1440 24bpp @ 60Hz

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    DP Up to 4096 x 2160 @60HZ
    eDP     Up to 3840 x 2160 @60Hz
    HDMI Up to 3840 x 2160 @30Hz
    LVDS, VGA Up to 1920 x 1200 @ 60Hz

    HDMI: up to 1920 x 1080p
    LVDS: up to 1920 x 1200

    Stockage de masse
    Optional eMMC drive on-board
    M.2 SATA SSD slot (Socket 2 Key B Type 2242 or 2260)
    microSD Card slot
    SATA 7p M connector

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    Optional eMMC drive soldered onboard
    2 x external S-ATA Gen3 Channel
    SD interface

    4GB eMMC drive soldered onboard***
    microSD Card slot
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

    *** For additional configurability please contact SECO

    Networking
    2 x Gigabit Ethernet ports

    SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector
    SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard

    Gigabit Ethernet interface
    Intel® I210 or I211 Controller (MAC + PHY)

    Gigabit Ethernet connector
    Internal USB connector for Wi-Fi Module

    USB
    2 x USB 3.0 Host ports on Type-A sockets
    2 x USB 2.0 Host port on internal pin header
    1 x USB 2.0 host port on M.2 Connectivity Slot
    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header
    6 x USB 2.0 Host Ports
    2 x USB 3.0 Host Ports (*)

    (*) Second USB 3.0 Host port can be exploited only using
    Qseven® Rel. 2.1 compliant Carrier boards
    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    PCI-e
    1 x PCI-e x1 port on M.2 Connectivity Slot
    ...
    4 x PCI-e Root Ports (including the PCI-e port used for Gigabit
    Ethernet controller)
    ...
    Audio

    Audio available on HDMI and miniDP++ interfaces
    HD Audio codec
    Combo TRRS connector with LineOut and MicIn support

    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header
    HD Audio interface

    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
    AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

    Ports série
    2 x RS-232 / RS-422 / RS-485 UARTS, on internal Pin Header

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    1 x UART, TTL interface

    Debug UART interface, TTL voltage level.
    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
    Other serial interfaces on the expansion connector:
    SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
    SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

    Autres interfaces
    I2C Touch Panel connector
    Front Panel Pin Header
    CIR (Consumer InfraRed) sensor
    8 x GPI/Os

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    I2C Bus
    LPC Bus
    SM Bus
    SPI interface
    Watch Dog Timer
    Thermal / FAN management
    Power Management Signals

    Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
    Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

    * Please note that some of these interfaces are factory options, other configurations are made via SW.

    Alimentation électrique
    +18VDC ÷ +32VDC recommended
    +15VDC ÷ +36VDC absolute
    RTC Battery

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    +5VDC and +5VSB (optional)

    +12VDC; Additional embedded Low Power RTC;
    SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

    Consommation d'énergie
    ...
    ...
    ...
    ...
    Système d'exploitation

    Microsoft® Windows 7 (32 / 64 bit)
    Microsoft® Windows 8.1 (32 / 64 bit)
    Microsoft® Windows 10 (32 / 64 bit)
    Microsoft® Windows 10 IoT
    Microsoft® Windows Embedded Standard 7 (32 / 64 bit)
    Microsoft® Windows Embedded Standard 8 (32 / 64 bit)
    Linux
    Yocto

    Linux

    Microsoft® Windows 10 Enterprise (64bit)
    Microsoft® Windows 10 IoT Core
    Wind River Linux 64 bit
    Yocto (64 bit)
    Android (planning)

    - Free Android and Linux community BSP available at UDOO.org
    - SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
    - Yocto Guideline valid for SECO BSP

    Température d'exploitation

    0°C  ÷ +60 °C (commercial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C (Industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)**
    For industrial temp. (-40°C ÷ +85°C)** please contact us

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    101.6 x 101.6 mm (4” x 4”)
    89.5 x 87 mm (3.52” x 3.43”)
    70x70 mm (2.76” x 2.76”)
    110 x 86.5 mm (4.5” x 3.7”)
    Security
    N/A
    ...
    ...
    N/A
    BIOS
    N/A
    ...
    ...
    N/A
    Embedded Controller Functionalities
    N/A
    ...
    ...
    N/A

    Description

    Détails

    SBC-A80-eNUC is SECO’s first Single Board Computer based on the Intel® Pentium® and Celeron® N3000 series, in the newly created embedded NUC™ (eNUC) form factor from the SGeT consortium. This embedded NUC™ Type 2 “Connectivity” module (101.6 x 101.6 mm) is a multifunctional and long lifetime solution that features Industrial range power supply, HDMI, miniDP and eDP video connectors, M.2 SSD and M.2 PCI-e slots, along with Dual Gigabit Ethernet and USB 3.0 Connectivity. A smart, innovative, cost-effective and aimed at next generation Single Board Computer.
    Informations supplémentaires

    Informations complémentaires

    Processeur
    Intel® Pentium® N3710, Quad Core @ 1.6GHz (Turbo Boost 2.56GHz), 2MB Cache, 6W TDP
    Intel® Celeron® N3160, Quad Core @ 1.6GHz (Turbo Boost 2.24GHz), 2MB Cache, 6W TDP
    Intel® Celeron® N3060, Dual Core @ 1.6GHz (Turbo Boost 2.48GHz), 2MB Cache, 6W TDP
    Intel® Celeron® N3010, Dual Core @ 1.04GHz (Turbo Boost 2.24GHz), 2MB Cache, 4W TDP
    Intel® Atom™ x5-E8000, Quad Core @ 1.04GHz (Turbo Boost 2.00GHz), 2MB Cache, 5W TDP
    Max Cores
    4
    Longueur filet max
    4
    Mémoire
    2 x DDR3L SO-DIMM Slots with Dual Channel Support,
    up to 8GB DDR3L-1600
    Graphique
    Integrated Graphics
    Three independent display support
    HW decoding of HEVC(H.265), H.264, MPEG2, MVC, VC-1, VP8, WMV9, JPEG/MJPEG formats
    HW encoding of H.264, MVC and JPEG/MPEG formats
    Interfaces vidéo

    HDMI connector
    miniDP++ connector
    embedded Display Port (eDP) internal connector

     

    Résolution vidéo
    HDMI, DP: up to 3840x2160 24bpp @ 30Hz, 2560x1600 24bpp @ 60Hz
    eDP: up to 2560x1440 24bpp @ 60Hz
    Stockage de masse
    Optional eMMC drive on-board
    M.2 SATA SSD slot (Socket 2 Key B Type 2242 or 2260)
    microSD Card slot
    SATA 7p M connector
    Networking
    2 x Gigabit Ethernet ports

    USB
    2 x USB 3.0 Host ports on Type-A sockets
    2 x USB 2.0 Host port on internal pin header
    1 x USB 2.0 host port on M.2 Connectivity Slot
    PCI-e
    1 x PCI-e x1 port on M.2 Connectivity Slot
    Audio

    Audio available on HDMI and miniDP++ interfaces
    HD Audio codec
    Combo TRRS connector with LineOut and MicIn support

    Ports série
    2 x RS-232 / RS-422 / RS-485 UARTS, on internal Pin Header
    Autres interfaces
    I2C Touch Panel connector
    Front Panel Pin Header
    CIR (Consumer InfraRed) sensor
    8 x GPI/Os
    Alimentation électrique
    +18VDC ÷ +32VDC recommended
    +15VDC ÷ +36VDC absolute
    RTC Battery
    Système d'exploitation

    Microsoft® Windows 7 (32 / 64 bit)
    Microsoft® Windows 8.1 (32 / 64 bit)
    Microsoft® Windows 10 (32 / 64 bit)
    Microsoft® Windows 10 IoT
    Microsoft® Windows Embedded Standard 7 (32 / 64 bit)
    Microsoft® Windows Embedded Standard 8 (32 / 64 bit)
    Linux
    Yocto

    Température d'exploitation

    0°C  ÷ +60 °C (commercial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    101.6 x 101.6 mm (4” x 4”)
    Logiciel
    BIOS
    • [BIOS] - Release version 1.04*
    EAPI
    • [Embedded application programming interface] - Release version 1.20.16*
    Linux-YOCTO
    • [BSP] - Yocto Pyro*
    • [Images] - Sample images (sato and minimal) (pyro 64bit)*
    Windows 8.1
    • [Chipset - 32/64 bit] - Driver version 10.1.1.14*
    • [Video - 32 bit] - Driver version 15.40.9.4424*
    • [Video - 64 bit] - Driver version 15.40.9.64.4424*
    • [TXE installer - 32/64 bit] - Driver version 25.11.20964.0925*
    • [Serial I/O - 64 bit] - Driver version 153101*
    • [LAN - 32/64 bit] - Driver version 8045.04212016*
    • [Audio - 32 bit] - Driver version R279 *
    • [Audio - 64 bit] - Driver version R279*
    Windows 7
    • [Chipset - 32/64 bit] - Driver version 10.1.1.14*
    • [Video - 32 bit] - Driver version 15.40.9.4424*
    • [Video - 64 bit] - Driver version 15.40.9.64.4424*
    • [TXE installer - 32/64 bit] - Driver version 25.11.20964.0925*
    • [Serial I/O - 32/64 bit] - Driver version MR1*
    • [LAN - 32/64 bit] - Driver version 7099.04212016*
    • [Audio - 32 bit] - Driver version R279*
    • [Audio - 64 bit] - Driver version R279*
    • [USB 3.0 - 32/64 bit] - Driver version 4.0.5.55*
    Windows 10
    • [IO Tools - 32/64bit] - SPB Test Tool sample code (Only for demonstration) - Build_1265_18_02_22*
    • [IO Tools - 32/64bit] - GPIO Test Tool sample code (Only for demonstration) - Build_1283_18_03_22*
    • [IO Tools - 32/64bit] - HSUART Virtual COM sample code (Only for demonstration) - v1.1*
    • [I/O driver - 32/64bit] - PCAL6408 Driver - Build_1281_18_03_22*
    • [Chipset - 32/64 bit] - Driver version 10.1.1.14*
    • [Video - 32 bit] - Driver version 15.40.9.4424*
    • [Video - 64 bit] - Driver version 15.40.9.64.4424*
    • [TXE installer - 32/64 bit] - Driver version 25.11.20964.0925*
    • [Serial I/O - 32/64 bit] - Driver version 152802*
    • [LAN - 32/64 bit] - Driver version 10008.04212016*
    • [Audio - 32 bit] - Driver version R279 *
    • [Audio - 64 bit] - Driver version R279*

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Documents

    * User need to register to site before download reserved files. Please login if you are a registered user.

    SBC-A80-eNUC

    SBC-A80-eNUC
    • ÉVALUER NOS PRODUITS

      Max. 3 pcs par code article
    • PRIX ÉCHANTILLONNAGE

      Frais d'expédition inclus
    • UNIQUEMENT B2B

      Support technique fourni exclusivement pour les entreprises
    SBC with the N-series Intel® Pentium® and Celeron® SOCs in the embedded NUC™ form factor
    Code article SKU Description article Configuration article Acheter des échantillons en ligne Nous contacter comparer
    SA80-1030-0000-C0 SBC w/Intel® Pentium® N3710 SBC - SBC-A80-eNUC - N3710 - 16GB eMMC AJOUTER POUR COMPARER
    SA80-1040-0000-C0 SBC w/Intel® Pentium® N3710 SBC - SBC-A80-eNUC - N3710 - 32GB eMMC AJOUTER POUR COMPARER
    SA80-2030-0000-C0 SBC w/Intel® Celeron® N3160 SBC - SBC-A80-eNUC - N3160 - 16GB eMMC AJOUTER POUR COMPARER
    SA80-2040-0000-C0 SBC w/Intel® Celeron® N3160 SBC - SBC-A80-eNUC - N3160 - 32GB eMMC AJOUTER POUR COMPARER
    SA80-3030-0000-C0 SBC w/Intel® Celeron® N3060 SBC - SBC-A80-eNUC - N3060 - 16GB eMMC AJOUTER POUR COMPARER
    SA80-3040-0000-C0 SBC w/Intel® Celeron® N3060 SBC - SBC-A80-eNUC - N3060 - 32GB eMMC AJOUTER POUR COMPARER
    SA80-4030-0000-C0 SBC w/Intel Braswell SBC - SBC-A80-eNUC - N3010 - 16GB eMM AJOUTER POUR COMPARER
    SA80-4040-0000-C0 SBC w/Intel® Celeron® N3010 SBC - SBC-A80-eNUC - N3010 - 32GB eMMC AJOUTER POUR COMPARER
    SA80-5030-0000-C0 SBC w/Intel® Atom™ x5-E8000 SBC - SBC-A80-eNUC - x5-E8000 - 16GB eMMC AJOUTER POUR COMPARER
    SA80-5040-0000-C0 SBC w/Intel® Atom™ x5-E8000 SBC - SBC-A80-eNUC - x5-E8000 - 32GB eMMC AJOUTER POUR COMPARER

    • Dispositifs
    • IdO
    • Infodivertissement
    • Sécurité/Surveillance
    • Transports
    Top