Benvenuti nel sito SECO S.p.A.

×

Inscription

Informations compte

  • Données de connexion

    ou se connecter

    Prénom obligatoire!
    Nom obligatoire!
    Numéro fiscal obligatoire!
    Société obligatoire!
    Numéro de TVA obligatoire!
    Pays obligatoire!
    Prénom non valide!
    Nom non valide!
    Ce n'est pas une adresse email!
    Adresse email obligatoire!
    Cet email existe déjà!
    Mot de passe obligatoire!
    Saisir un mot de passe valide!
    Saisir au moins 6 caractères!
    Saisir au maximum 16 caractères!
    Les mots de passe ne sont pas les mêmes!
    Termes et conditions obligatoires!
    Email ou mot de passe incorrect!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleasecliquez ici

    SBC-A62-J

    SBC with NXP i.MX 6 Processor

    • Single-, Dual- and Quad- Core (ARM® Cortex® A9 Cores)
    • Wi-Fi add-on module; up 28 GPI/Os; CAN Bus
    • 2D/3D dedicated graphics processors
    • Up to 2GB DDR3L on-board

      SBC-A62-J

    SBC-A62-J

    μQ7-A75-J

    μQ7-A75-J

    Q7-928

    Q7-928

    SBC-B08

    SBC-B08

     
    Statut de développement du produit
    Processeur

    NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
    SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
    SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
    SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
    SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors

    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6DP DualPlus - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core
    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
    Puces
    ...
    ...
    ...
    ...
    Max Cores
    4
    2
    4
    1 + 1
    Longueur filet max
    0
    ...
    0
    ...
    Mémoire

    Soldered on-board DDR3L memory***:
    SBC-A62-J-SOLO: 512MB 32-bit interface
    SBC-A62-J-LITE: 1GB 64-bit interface
    SBC-A62-J-PLUS: 2GB 64-bit interface
    SBC-A62-J-QUAD: 1GB 64-bit interface

    *** For additional configurability please contact SECO

    Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F

    Up to 4GB DDR3L on-board (up to 2GB with i.MX6S)

    Soldered on-board DDR3L memory, 32-bit interface
    SYS-B08-BASIC/D: 512MB
    SYS-B08-FULL/D: 1GB

    Graphique

    Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
    OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
    SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Supports 2 independent displays

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES 2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D, i.MX6DP and i.MX6Q)
    Enhanced 2D and 3D graphics with i.MX6DP
    Supports up to 3 independent displays with i.MX6D, i.MX6DPand i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Interfaces vidéo

    1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
    HDMI interface 1.4

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4
    Video Input Port / Camera Connector

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    Résolution vidéo

    HDMI: up to 1920 x 1080p
    LVDS: up to 1920 x 1200

    LVDS, resolution up to 1920x1200
    HDMI, resolution up to 1080p

    LVDS, up to 1920x1200
    HDMI, up to 1080p

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    Stockage de masse

    4GB eMMC drive soldered onboard***
    microSD Card slot
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

    *** For additional configurability please contact SECO

    On-board eMMC drive, up to 8 GB
    SD / MMC / SDIO interface
    Internal SPI Flash for booting

    On-board eMMC drive, up to 32 GB
    SD / MMC / SDIO interface
    1 x μSD Card Slot on-board
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    Networking

    Gigabit Ethernet connector
    Internal USB connector for Wi-Fi Module

    Fast Ethernet (10/100) interface
    Gigabit Ethernet interface

    SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector
    SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard

    USB
    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port

    1 x USB OTG interface
    1 x USB 2.0 Host interface

    1 x USB OTG interface
    4 x USB 2.0 Host interfaces

    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header
    PCI-e
    ...

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
    ...
    Audio

    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
    AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

    I2S / AC’97 Audio Interface
    AC'97 Audio Interface
    I2S
    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header
    Ports série

    Debug UART interface, TTL voltage level.
    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
    Other serial interfaces on the expansion connector:
    SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
    SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

    ...

    2 x serial ports (TTL interface)
    CAN port interface

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    Autres interfaces

    Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
    Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

    * Please note that some of these interfaces are factory options, other configurations are made via SW.

    On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
    - Additional SD interface
    - Up to 4 UARTs
    - CAN interface
    - Watchdog(s)
    - I2C interfaces
    - PWM outputs
    - SPI interface
    - Additional Audio interface

    (*) not all the combinations are allowed simultaneously Power Management Signals

    I2C Bus
    LPC Bus
    SM Bus
    Power Management Signals

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    Alimentation électrique

    +12VDC; Additional embedded Low Power RTC;
    SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

    +5VDC ± 5%
    Optional Low Power RTC

    +5VDC ± 5%

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    Consommation d'énergie
    ...
    ...
    ...
    ...
    Système d'exploitation

    - Free Android and Linux community BSP available at UDOO.org
    - SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
    - Yocto Guideline valid for SECO BSP

    Linux
    Yocto

    Linux
    Yocto
    Microsoft® Windows Embedded Compact 7

    Linux
    Température d'exploitation

    0°C  ÷ +60 °C (commercial temp.)**
    For industrial temp. (-40°C ÷ +85°C)** please contact us

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (Industrial temp.)* 

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +70°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    110 x 86.5 mm (4.5” x 3.7”)
    40x70 mm (1.57” x 2.76”)
    70x70 mm (2.76” x 2.76”)
    89.5 x 87 mm (3.52” x 3.43”)
    Security
    N/A
    N/A
    N/A
    ...
    BIOS
    N/A
    N/A
    N/A
    ...
    Embedded Controller Functionalities
    N/A
    N/A
    N/A
    ...

    Description

    Détails

    Low-end Single Board Computer with NXP i.MX 6 Processor, that exploits the potential of a configurable expansion connector, to fully meet the configuration flexibility needs. Thanks to its features, the new Single Board with the i.MX6 is ideal for applications in digital signage, infotainment and in all general purpose contexts requiring multimedia capabilities, high performance and high levels of parallel computing for the reproduction of relevant and/or engaging contents.
    Informations supplémentaires

    Informations complémentaires

    Processeur

    NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
    SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
    SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
    SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
    SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

    Max Cores
    4
    Mémoire

    Soldered on-board DDR3L memory***:
    SBC-A62-J-SOLO: 512MB 32-bit interface
    SBC-A62-J-LITE: 1GB 64-bit interface
    SBC-A62-J-PLUS: 2GB 64-bit interface
    SBC-A62-J-QUAD: 1GB 64-bit interface

    *** For additional configurability please contact SECO

    Graphique

    Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
    OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
    SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

    Interfaces vidéo

    1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
    HDMI interface 1.4

    Résolution vidéo

    HDMI: up to 1920 x 1080p
    LVDS: up to 1920 x 1200

    Stockage de masse

    4GB eMMC drive soldered onboard***
    microSD Card slot
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

    *** For additional configurability please contact SECO

    Networking

    Gigabit Ethernet connector
    Internal USB connector for Wi-Fi Module

    USB
    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    Audio

    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
    AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

    Ports série

    Debug UART interface, TTL voltage level.
    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
    Other serial interfaces on the expansion connector:
    SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
    SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

    Autres interfaces

    Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
    Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

    * Please note that some of these interfaces are factory options, other configurations are made via SW.

    Alimentation électrique

    +12VDC; Additional embedded Low Power RTC;
    SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

    Système d'exploitation

    - Free Android and Linux community BSP available at UDOO.org
    - SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
    - Yocto Guideline valid for SECO BSP

    Température d'exploitation

    0°C  ÷ +60 °C (commercial temp.)**
    For industrial temp. (-40°C ÷ +85°C)** please contact us

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    110 x 86.5 mm (4.5” x 3.7”)
    Logiciel
    SECO WIKI
    Linux-YOCTO
    • Yocto meta SECO BSP release Guideline*
    Windows Embedded Compact 7
    • Release Note for SBC-A62-J WEC7/WEC2013 BSP*
    Android
    • Free community BSP available at udoo.org - SECO BSP on request*
    BSP
    Linux
    • Free community BSP available at udoo.org*
    • SECO BSP*

    * User need to register to site before download reserved files. Please login if you are a registered user.

    SBC-A62-J

    SBC-A62-J
    • ÉVALUER NOS PRODUITS

      Max. 3 pcs par code article
    • PRIX ÉCHANTILLONNAGE

      Frais d'expédition inclus
    • UNIQUEMENT B2B

      Support technique fourni exclusivement pour les entreprises
    SBC with NXP i.MX 6 Processor
    Code article SKU Description article Configuration article Acheter des échantillons en ligne Nous contacter comparer
    SYS-A62-QUAD_2-ILCA SBC-A62-J-QUAD System SBC-A62-J System, QUAD version (CPU 800MHz i.MX6Q Quad) w/ 2GB RAM, Large Heatsink, industrial temperature AJOUTER POUR COMPARER
    SYS-A62-PLUS-CLCW SBC-A62-J-PLUS System SBC-A62-J System, PLUS version (CPU 1GHz i.MX6 DualPlus) w/Large Heatsink and Serial Debug kit, commercial temperature, w/Demo Linux BSP AJOUTER POUR COMPARER
    SYS-A62-QUAD-CLCW SBC-A62-J-QUAD System SBC-A62-J System, QUAD version (CPU 1GHz i.MX6Q Quad) w/Large Heatsink and Serial Debug kit, commercial temperature, w/Demo Linux BSP AJOUTER POUR COMPARER
    SYS-A62-LITE-CSCW SBC-A62-J-LITE System SBC-A62-J System, LITE version (CPU 1GHz i.MX6 DualLIte) w/Small Heatsink and Serial Debug kit, commercial temperature, w/Demo Linux BSP AJOUTER POUR COMPARER
    SYS-A62-SOLO-CSCW SBC-A62-J-SOLO System SBC-A62-J System, SOLO version (CPU 1GHz i.MX6 Solo) w/Small Heatsink and Serial Debug kit, commercial temperature, w/Demo Linux BSP AJOUTER POUR COMPARER

    • IdO
    • Infodivertissement
    • Instruments de mesure
    • Médical
    • Transports
    Top