Benvenuti nel sito SECO S.p.A.

×

Inscription

Informations compte

  • Données de connexion

    ou se connecter

    Prénom obligatoire!
    Nom obligatoire!
    Numéro fiscal obligatoire!
    Société obligatoire!
    Numéro de TVA obligatoire!
    Pays obligatoire!
    Prénom non valide!
    Nom non valide!
    Ce n'est pas une adresse email!
    Adresse email obligatoire!
    Cet email existe déjà!
    Mot de passe obligatoire!
    Saisir un mot de passe valide!
    Saisir au moins 6 caractères!
    Saisir au maximum 16 caractères!
    Les mots de passe ne sont pas les mêmes!
    Termes et conditions obligatoires!
    Email ou mot de passe incorrect!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleasecliquez ici

    SBC-984

    SBC with NXP i.MX 6 Processor

    • Single-, Dual- and Quad- Core (ARM Cortex™A9 Cores)
    • miniPCI-e slot; CAN Bus; Wi-Fi add-on module;
    • 2D/3D dedicated graphics processors
    • Up to 2GB DDR3L on-board
    Disponible dans la plage des températures industrielles

      SBC-984

    SBC-984

    SBC-B08

    SBC-B08

    Q7-928

    Q7-928

    SYS-A62-10

    SYS-A62-10

     
    Statut de développement du produit
    Processeur

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6DP DualPlus - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core
    Multicore NXP i.MX 6 processor family
    SYS-A62-10/SOLO: i.MX6S Solo, 1 x ARM Cortex-A9 @1 GHz Core
    SYS-A62-10/LITE: i.MX6DL Dual Lite, 2 x ARM Cortex-A9 @1 GHz Cores
    SYS-A62-10/QUAD: i.MX6Q Quad, 4 x ARM Cortex-A9 @1 GHz Cores
    Puces
    ...
    ...
    ...
    ...
    Max Cores
    4
    1 + 1
    4
    0
    Max Thread
    0
    ...
    0
    0
    Mémoire
    Up to 2GB DDR3L on-board (up to 1GB with i.MX6S)

    Soldered on-board DDR3L memory, 32-bit interface
    SYS-B08-BASIC/D: 512MB
    SYS-B08-FULL/D: 1GB

    Up to 4GB DDR3L on-board (up to 2GB with i.MX6S)
    On-board DDR3L soldered memory;
    SYS-A62-10/SOLO: 512MB 32-bit
    SYS-A62-10/LITE: 1GB 64-bit
    SYS-A62-10/QUAD: 1GB 64-bit
    Graphique

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q)
    Supports up to 3 independent displays with i.MX6D and i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES 2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D, i.MX6DP and i.MX6Q)
    Enhanced 2D and 3D graphics with i.MX6DP
    Supports up to 3 independent displays with i.MX6D, i.MX6DPand i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    2D, OpenGL® ES2.0 3D HW accelerator
    OpenVG™ accelerator (SYS-A62/10/QUAD only)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    Interfaces vidéo

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface
    Video Input Port / Camera connector (only with PCB rev. C or higher)

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4
    Video Input Port / Camera Connector

    10,1” LVDS display, resolution 1280 x 800, 30K hours life
    P-Cap (Projected Capacitive touch screen), with 2mm glass cover
    Glass Hardness IK08, Surface Hardness 8H (450g)
    Résolution vidéo
    LVDS, up to 1920x1200
    HDMI, up to 1080p

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    LVDS, up to 1920x1200
    HDMI, up to 1080p

    ...
    Stockage de masse
    On-board eMMC drive, up to 8 GB
    mSATA Half-size slot (shared with miniPCI-express)

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    On-board eMMC drive, up to 32 GB
    SD / MMC / SDIO interface
    1 x μSD Card Slot on-board
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)

    On-board 4GB eMMC drive
    microSD Card Slot
    SATA Connector (SYS-A62-10/QUAD only)
    Networking
    Gigabit Ethernet connector

    SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector
    SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard

    Gigabit Ethernet interface
    Gigabit Ethernet connector
    Optional WiFi pluggable module
    USB
    3 x standard USB 2.0 Type A
    1 x USB OTG on micro-AB connector
    Internal USB for optional WiFi module
    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header

    1 x USB OTG interface
    4 x USB 2.0 Host interfaces

    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    PCI-e
    miniPCI-express slot, shared with mSATA (only PCI-e 1.1 and Gen2 are supported)
    ...
    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
    ...
    Audio
    AC’97 Audio Codec

    Mic In, Line out internal pin header connector
    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header
    AC'97 Audio Interface
    I2S
    SYS-A62-10/LITE and SYS-A62-10/QUAD: Realtek ALC655
    AC’97 Audio Codec with Mic-In, Line-Out audio Jacks
    Ports série
    1 x RS-232 serial port
    TTL debug UART (Tx, RX only)
    CAN interface internal connector

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    2 x serial ports (TTL interface)
    CAN port interface

    Dedicated Serial ports:
    SYS-A62-10/SOLO: 2 x RS-232 ports 
    SYS-A62-10/LITE: 2 x RS-232 ports, 1 x CAN port
    SYS-A62-10/QUAD: 2 x RS-232 ports, 1 x RS-485 port, 1 x CAN port

    Other serial ports can be realised on expansion connector (see ""Other interfaces"")
    Autres interfaces
    I2C touch Connector
    Internal connector for power and reset buttons

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    I2C Bus
    LPC Bus
    SM Bus
    Power Management Signals

    MIPI-CSI Camera connector
    Programmable expansion connector with:
    SYS-A62-10/SOLO: up to 22 GPIOs, 2 x TTL CAN ports, 1 x UART TTL, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    SYS-A62-10/LITE: up to 20 GPIOs, 1 x TTL CAN port, 1 x UART TTL, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    SYS-A62-10/QUAD: up to 18 GPIOs, 1 x TTL CAN port, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    Alimentation électrique
    +12VDC ± 10%
    Embedded additional RTC circuitry for lowest power consumption
    Optional RTC Battery with lead cable and connector

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    +5VDC ± 5%

    +12VDC
    SYS-A62-10/SOLO and SYS-A62-10/LITE: internal i.MX6 RTC, require external battery for time/data retention
    SYS-A62-10/QUAD: low power RTC with on-board battery

    Consommation d'énergie
    ...
    ...
    ...
    ...
    Système d'exploitation
    Linux

    Linux
    Yocto

    Linux
    Yocto
    Microsoft® Windows Embedded Compact 7

    Linux
    Yocto
    Windows® Embedded Compact 7
    Température d'exploitation

    0°C  ÷ +70 °C (commercial version)
    -40°C ÷ +85°C (industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +70°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ 50°C

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    80 x 67 mm (3,15” x 2,64”)
    89.5 x 87 mm (3.52” x 3.43”)
    70x70 mm (2.76” x 2.76”)
    269,60 x 189,20 x 17,17 mm
    Security
    ...
    ...
    ...
    ...
    BIOS
    ...
    ...
    ...
    ...
    Embedded Controller Functionalities
    ...
    ...
    ...
    ...
    CAN Bus
    N/A
    ...
    ...
    ...
    Functional Safety Features
    N/A
    ...
    ...
    ...

    Description

    Détails

    SBC-984 is a Single Board Computer (only 80 x 67 mm) based on i.MX6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex™ A9 ARM Core (up to Quad Core processors), ideal for applications requiring multimedia capabilities and/or high levels of parallel computing, maintaining advantages offered by low-power consuming ARM architecture in an extremely reduced space.
    Informations supplémentaires

    Informations complémentaires

    Processeur

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    Max Cores
    4
    Mémoire
    Up to 2GB DDR3L on-board (up to 1GB with i.MX6S)
    Graphique

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q)
    Supports up to 3 independent displays with i.MX6D and i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Interfaces vidéo

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface
    Video Input Port / Camera connector (only with PCB rev. C or higher)

    Résolution vidéo
    LVDS, up to 1920x1200
    HDMI, up to 1080p
    Stockage de masse
    On-board eMMC drive, up to 8 GB
    mSATA Half-size slot (shared with miniPCI-express)
    Networking
    Gigabit Ethernet connector
    USB
    3 x standard USB 2.0 Type A
    1 x USB OTG on micro-AB connector
    Internal USB for optional WiFi module
    PCI-e
    miniPCI-express slot, shared with mSATA (only PCI-e 1.1 and Gen2 are supported)
    Audio
    AC’97 Audio Codec

    Mic In, Line out internal pin header connector
    Ports série
    1 x RS-232 serial port
    TTL debug UART (Tx, RX only)
    CAN interface internal connector
    Autres interfaces
    I2C touch Connector
    Internal connector for power and reset buttons
    Alimentation électrique
    +12VDC ± 10%
    Embedded additional RTC circuitry for lowest power consumption
    Optional RTC Battery with lead cable and connector
    Système d'exploitation
    Linux
    Température d'exploitation

    0°C  ÷ +70 °C (commercial version)
    -40°C ÷ +85°C (industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    80 x 67 mm (3,15” x 2,64”)
    Logiciel
    SECO WIKI
    BSP
    • SECO BSP*
    Linux-YOCTO
    • Yocto BSP*

    * User need to register to site before download reserved files. Please login if you are a registered user.

    SBC-984

    SBC-984
    • ÉVALUER NOS PRODUITS

      Max. 3 pcs par code article
    • PRIX ÉCHANTILLONNAGE

      Frais d'expédition inclus
    • UNIQUEMENT B2B

      Support technique fourni exclusivement pour les entreprises
    SBC with NXP i.MX 6 Processor
    Code article SKU Description article Configuration article Acheter des échantillons en ligne Nous contacter comparer
    S984-4310-1000-C1-V SBC - NXP i.MX6 Quad @1.0 GHz (w/ GPU, VPU) SBC - NXP i.MX6 Quad @1.0 GHz (w/ GPU, VPU), 1GB DDR3L Dual Channel, 4GB eMMC, LowPower RTC - Commercial temp. range AJOUTER POUR COMPARER

    • Automatisation industrielle
    • Infodivertissement
    • Médical
    • Sécurité/Surveillance
    • Transports
    Top