Benvenuti nel sito SECO S.p.A.

×

Inscription

Informations compte

  • Données de connexion

    ou se connecter

    Prénom obligatoire!
    Nom obligatoire!
    Numéro fiscal obligatoire!
    Société obligatoire!
    Numéro de TVA obligatoire!
    Pays obligatoire!
    Prénom non valide!
    Nom non valide!
    Ce n'est pas une adresse email!
    Adresse email obligatoire!
    Cet email existe déjà!
    Mot de passe obligatoire!
    Saisir un mot de passe valide!
    Saisir au moins 6 caractères!
    Saisir au maximum 16 caractères!
    Les mots de passe ne sont pas les mêmes!
    Termes et conditions obligatoires!
    Email ou mot de passe incorrect!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleasecliquez ici

    Plus de vues

    Q7-C25

    Qseven® Rel. 2.1 compliant module with NXP i.MX 8M Applications Processors

    • NXP i.MX 8M Applications Processors

    • 1x USB 3.0; 4x USB2.0; 1x PCI-e x1; 1x CAN Bus; 2x UART; 8x GPI/Os
    • Integrated GPU, supports 2 independent displays

    • up to 4GB soldered down DDR4-2400 memory

    Disponible dans la plage des températures industrielles

      Q7-C25

    Q7-C25

    μQ7-A75-J

    μQ7-A75-J

    Q7-928

    Q7-928

    SBC-A62-J

    SBC-A62-J

     
    Statut de développement du produit
    Processeur

    NXP i.MX 8M Family based on ARM Cortex®-A53 cores + general purpose Cortex®-M4 processor:
    i.MX 8M Quad - 4x Cortex®-A53 cores up to 1.5GHz
    i.MX 8M Dual - 2x Cortex®-A53 cores up to 1.5GHz
    i.MX 8M QuadLite - 4x Cortex®-A53 cores up to 1.5GHz, no VPU 

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors

    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6DP DualPlus - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
    SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
    SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
    SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
    SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

    Puces
    ...
    ...
    ...
    ...
    Max Cores
    0
    2
    4
    4
    Max Thread
    0
    ...
    0
    0
    Mémoire

    soldered down DDR4-2400 memory, 32-bit interface, up to 4GB

    Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F

    Up to 4GB DDR3L on-board (up to 2GB with i.MX6S)

    Soldered on-board DDR3L memory***:
    SBC-A62-J-SOLO: 512MB 32-bit interface
    SBC-A62-J-LITE: 1GB 64-bit interface
    SBC-A62-J-PLUS: 2GB 64-bit interface
    SBC-A62-J-QUAD: 1GB 64-bit interface

    *** For additional configurability please contact SECO

    Graphique

    Integrated Graphics Processing Unit, supports 2 independent displays.
    Embedded VPU, supports HW decoding of HEVC,H.264, H.263, MPEG-4, MPEG-2, AVC, VC-1, RV, DivX, VP6, VP8, VP9, JPEG (not for i.MX8M QuadLite).
    Supports OpenGL ES 3.1, Open CL 1.2, OpenGL 2.x, DirectX 11

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Supports 2 independent displays

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES 2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D, i.MX6DP and i.MX6Q)
    Enhanced 2D and 3D graphics with i.MX6DP
    Supports up to 3 independent displays with i.MX6D, i.MX6DPand i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
    OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
    SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

    Interfaces vidéo

    HDMI 2.0a / Display Port 1.3 interface, supporting HDCP 2.2 and HDCP 1.4/1.3
    eDP interface or 18- / 24-bit Dual Channel LVDS interface

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4
    Video Input Port / Camera Connector

    1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
    HDMI interface 1.4

    Résolution vidéo
    HDMI/DP: Up to 4096 x 2160p60
    LVDS/eDP: Up to 1920 x 1080 @ 60Hz

    LVDS, resolution up to 1920x1200
    HDMI, resolution up to 1080p

    LVDS, up to 1920x1200
    HDMI, up to 1080p

    HDMI: up to 1920 x 1080p
    LVDS: up to 1920 x 1200

    Stockage de masse

    eMMC 5.0 drive soldered on-board, up to 64GB
    Optional microSD slot on board
    QSPI Flash soldered-onboard

    On-board eMMC drive, up to 8 GB
    SD / MMC / SDIO interface
    Internal SPI Flash for booting

    On-board eMMC drive, up to 32 GB
    SD / MMC / SDIO interface
    1 x μSD Card Slot on-board
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)

    4GB eMMC drive soldered onboard***
    microSD Card slot
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

    *** For additional configurability please contact SECO

    Networking

    1 x Gigabit Ethernet interface
    Optional WiFi + BT LE module onboard

    Fast Ethernet (10/100) interface
    Gigabit Ethernet interface

    Gigabit Ethernet connector
    Internal USB connector for Wi-Fi Module

    USB

    1 x USB 3.0 OTG Ports
    Up to 4 x USB 2.0 Host Ports

    1 x USB OTG interface
    1 x USB 2.0 Host interface

    1 x USB OTG interface
    4 x USB 2.0 Host interfaces

    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    PCI-e

    1x PCI-e x1 port, optional

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
    ...
    Audio

    I2S Audio Interface

    I2S / AC’97 Audio Interface
    AC'97 Audio Interface
    I2S

    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
    AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

    Ports série

    1x UART Tx/Rx/RTS/CTS (Optional)
    1x Debug UART
    Optional CAN Bus interface (TTL Level)

    ...

    2 x serial ports (TTL interface)
    CAN port interface

    Debug UART interface, TTL voltage level.
    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
    Other serial interfaces on the expansion connector:
    SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
    SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

    Autres interfaces

    I2C Bus
    SM Bus
    Optional SPI interface
    8 x GPI/Os
    UltraLow Power RTC
    Power Management Signals
    Watchdog

    On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
    - Additional SD interface
    - Up to 4 UARTs
    - CAN interface
    - Watchdog(s)
    - I2C interfaces
    - PWM outputs
    - SPI interface
    - Additional Audio interface

    (*) not all the combinations are allowed simultaneously Power Management Signals

    I2C Bus
    LPC Bus
    SM Bus
    Power Management Signals

    Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
    Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

    * Please note that some of these interfaces are factory options, other configurations are made via SW.

    Alimentation électrique

    +5VDC ±5% and +5VSB (optional)
    +3.3V_RTC

    +5VDC ± 5%
    Optional Low Power RTC

    +5VDC ± 5%

    +12VDC; Additional embedded Low Power RTC;
    SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

    Consommation d'énergie
    ...
    ...
    ...
    ...
    Système d'exploitation

    Linux
    Android

    Linux
    Yocto

    Linux
    Yocto
    Microsoft® Windows Embedded Compact 7

    - Free Android and Linux community BSP available at UDOO.org
    - SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
    - Yocto Guideline valid for SECO BSP

    Température d'exploitation

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C (Industrial version, without WiF+BT optional module)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (Industrial temp.)* 

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +70°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)**
    For industrial temp. (-40°C ÷ +85°C)** please contact us

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    70x70 mm (2.76” x 2.76”)
    40x70 mm (1.57” x 2.76”)
    70x70 mm (2.76” x 2.76”)
    110 x 86.5 mm (4.5” x 3.7”)
    Security
    ...
    ...
    ...
    ...
    BIOS
    ...
    ...
    ...
    ...
    Embedded Controller Functionalities
    ...
    ...
    ...
    ...

    Description

    Détails

    The Q7-C25 is a Qseven® Rel. 2.1 compliant module based on the NXP i.MX 8M Applications Processors with multicore processing: Dual or Quad ARM Cortex®-A53 cores + general purpose Cortex®-M4 processor for realtime applications and 4Kp60 HEVC decoding with HDR. Q7-C25 is a scalable solution for applications like domotics or vending, requiring advanced security, connectivity and multimedia.

    Informations supplémentaires

    Informations complémentaires

    Processeur

    NXP i.MX 8M Family based on ARM Cortex®-A53 cores + general purpose Cortex®-M4 processor:
    i.MX 8M Quad - 4x Cortex®-A53 cores up to 1.5GHz
    i.MX 8M Dual - 2x Cortex®-A53 cores up to 1.5GHz
    i.MX 8M QuadLite - 4x Cortex®-A53 cores up to 1.5GHz, no VPU 

    Mémoire

    soldered down DDR4-2400 memory, 32-bit interface, up to 4GB

    Graphique

    Integrated Graphics Processing Unit, supports 2 independent displays.
    Embedded VPU, supports HW decoding of HEVC,H.264, H.263, MPEG-4, MPEG-2, AVC, VC-1, RV, DivX, VP6, VP8, VP9, JPEG (not for i.MX8M QuadLite).
    Supports OpenGL ES 3.1, Open CL 1.2, OpenGL 2.x, DirectX 11

    Interfaces vidéo

    HDMI 2.0a / Display Port 1.3 interface, supporting HDCP 2.2 and HDCP 1.4/1.3
    eDP interface or 18- / 24-bit Dual Channel LVDS interface

    Résolution vidéo
    HDMI/DP: Up to 4096 x 2160p60
    LVDS/eDP: Up to 1920 x 1080 @ 60Hz
    Interfaces vidéo
    DUAL CHANNEL LVDS, HDMI, eDP, DP
    Stockage de masse

    eMMC 5.0 drive soldered on-board, up to 64GB
    Optional microSD slot on board
    QSPI Flash soldered-onboard

    Networking

    1 x Gigabit Ethernet interface
    Optional WiFi + BT LE module onboard

    USB

    1 x USB 3.0 OTG Ports
    Up to 4 x USB 2.0 Host Ports

    PCI-e

    1x PCI-e x1 port, optional

    Audio

    I2S Audio Interface

    Ports série

    1x UART Tx/Rx/RTS/CTS (Optional)
    1x Debug UART
    Optional CAN Bus interface (TTL Level)

    Autres interfaces

    I2C Bus
    SM Bus
    Optional SPI interface
    8 x GPI/Os
    UltraLow Power RTC
    Power Management Signals
    Watchdog

    Alimentation électrique

    +5VDC ±5% and +5VSB (optional)
    +3.3V_RTC

    Système d'exploitation

    Linux
    Android

    Température d'exploitation

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C (Industrial version, without WiF+BT optional module)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    70x70 mm (2.76” x 2.76”)
    Logiciel

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Documents

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Q7-C25

    Q7-C25
    • ÉVALUER NOS PRODUITS

      Max. 3 pcs par code article
    • PRIX ÉCHANTILLONNAGE

      Frais d'expédition inclus
    • UNIQUEMENT B2B

      Support technique fourni exclusivement pour les entreprises
    Qseven® Rel. 2.1 compliant module with the NXP i.MX 8M Applications Processors
    Code article SKU Description article Configuration article Acheter des échantillons en ligne Nous contacter comparer
    QC25-0000-2200-C0 Qseven with NXP i.MX 8M Q7-C25 Qseven - NXP i.MX 8M, LVDS AJOUTER POUR COMPARER

    • Automatisation des bâtiments
    • Automatisation industrielle
    • Dispositifs
    • Infodivertissement
    • Transports
    Top