Benvenuti nel sito SECO S.p.A.

×

Inscription

Informations compte

  • Données de connexion

    ou se connecter

    Prénom obligatoire!
    Nom obligatoire!
    Numéro fiscal obligatoire!
    Société obligatoire!
    Numéro de TVA obligatoire!
    Pays obligatoire!
    Prénom non valide!
    Nom non valide!
    Ce n'est pas une adresse email!
    Adresse email obligatoire!
    Cet email existe déjà!
    Mot de passe obligatoire!
    Saisir un mot de passe valide!
    Saisir au moins 6 caractères!
    Saisir au maximum 16 caractères!
    Les mots de passe ne sont pas les mêmes!
    Termes et conditions obligatoires!
    Email ou mot de passe incorrect!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleasecliquez ici

    Q7-796

    Computer on Module based on the Texas Instruments® OMAP™ 37xx Family

    • OMAP™ 37xx Family - ARM Cortex™ A8 up to 1 GHz core
    • 2 x COM ports; CAN interface; 10/100 Base-T interface
    • PowerVR SGX™ Graphics Accelerator + Up to 800MHz TMS320C64x+™ DSP Core
    • Mobile DDR 128 / 256MB / 512 MB onboard
    Disponible dans la plage des températures industrielles

      Q7-796

    Q7-796

    μQ7-A75-J

    μQ7-A75-J

    Q7-C26

    Q7-C26

    SYS-B08-7/BD

    SYS-B08-7/BD

     
    Statut de développement du produit
    Processeur

    Texas Instruments® OMAP™ 37xx Family:
    AM3703 (Cortex™ A8 up to 1 GHz core)
    DM3730 (Cortex™ A8, up to 1GHz core + PowerVR
    SGX™ Graphics Accelerator + Up to 800MHz
    TMS320C64x+™ DSP Core

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors

    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core

    NXP i.MX 8 Family:
    i.MX 8QuadMax - 2x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores
    i.MX 8QuadPlus - 1x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores
    i.MX 8Quad - 4x Cortex®-A53 cores + 2x Cortex®-M4F cores

    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
    Puces
    ...
    ...
    ...
    ...
    Max Cores
    1
    2
    0
    1 + 1
    Max Thread
    0
    ...
    0
    ...
    Mémoire
    Mobile DDR 128 / 256MB / 512 MB onboard

    Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F

    soldered down LPDDR4-3200 memory, 64-bit interface

    512MB RAM
    Graphique
    ...

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Supports 2 independent displays

    Integrated Graphics Processing Unit, supports 2 independent displays.
    Embedded VPU, supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-2, VC-1, RV9, VP8, H.263 and MPEG4 part, HW encoding of AVC/H.264
    Supports OpenGL ES 3.1, Open CL 1.2, OpenGL 3.x, DirectX 11

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Interfaces vidéo
    LVDS Single/Dual Channel 18/24 Bit

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface

    HDMI 2.0a or DP 1.3 interface, supporting HDCP 2.2
    Dual Channel or 2 x Single Channel 18- / 24-bit LVDS interface

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    Résolution vidéo
    LVDS, up to 1366 x 768

    LVDS, resolution up to 1920x1200
    HDMI, resolution up to 1080p

    HDMI:Up to 4Kp60
    LVDSUp to 1080p

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    Stockage de masse
    256 MB / 512MB / 1GB NAND Flash
    eMMC soldered onboard up to 16GB

    On-board eMMC drive, up to 8 GB
    SD / MMC / SDIO interface
    Internal SPI Flash for booting

    1x SATA Gen3 interface (alternative to 1x PCI-e x1 port)
    eMMC 5.1 drive soldered on-board
    SD 4-bit interface
    QSPI Flash soldered-on-board

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    Networking
    10/100 Base-T interface
    Fast Ethernet (10/100) interface

    1 x Gigabit Ethernet interface

    1x FastETH
    USB
    1x USB OTG
    2x USB 2.0 Host

    1 x USB OTG interface
    1 x USB 2.0 Host interface

    4 x USB 2.0 Host Ports 
    1 x USB 3.0 Host Port
    1 x USB 2.0 OTG port

    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header
    PCI-e
    ...

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    Up to 2x PCI-e x1 Gen3 ports

    ...
    Audio
    AC’97 Audio Interface
    I2S / AC’97 Audio Interface

    I2S Audio Interface

    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header
    Ports série
    2 x COM ports

    CAN interface
    ...

    1x UART Tx/Rx/RTS/CTS
    1x CAN Bus (TTL level)

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    Autres interfaces

    MMC/HC MMC/SD/SDHC/SDIO interface
    Video Input Port / Camera Connector
    LPC Bus
    SMBus
    SPI interface
    I2C bus
    JTAG

    On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
    - Additional SD interface
    - Up to 4 UARTs
    - CAN interface
    - Watchdog(s)
    - I2C interfaces
    - PWM outputs
    - SPI interface
    - Additional Audio interface

    (*) not all the combinations are allowed simultaneously Power Management Signals

    CSI camera connector
    2x I2C Bus
    SPI interface
    8 x GPI/Os
    Boot select signal
    Power Management Signals
    Watchdog

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    Alimentation électrique
    ...

    +5VDC ± 5%
    Optional Low Power RTC

    +5VDC ± 5%
    +3.3V_RTC

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    Consommation d'énergie
    ...
    ...
    ...
    ...
    Système d'exploitation
    Microsoft® Windows® CE 6.0

    Linux

    Linux
    Yocto

    Linux
    Android

    Linux
    Température d'exploitation

    0°C ÷ +70°C (commercial version)
    -40°C ÷ +85°C (industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (Industrial temp.)* 

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C (Industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Commercial
    Dimensions
    70x70 mm (2.76” x 2.76”)
    40x70 mm (1.57” x 2.76”)
    70x70 mm (2.76” x 2.76”)
    189.60 x 121.40 x 28.20 mm
    Security
    ...
    ...
    ...
    ...
    BIOS
    ...
    ...
    ...
    ...
    Embedded Controller Functionalities
    ...
    ...
    ...
    ...

    Description

    Détails

    The Q7-796 is a Qseven® Spec. Rel. 1.20 Compliant Module designed by SECO, which represents the best solution for development of scalable ARM solutions, offering different level of performance and ultra-low power consumption demanding applications.


    The board integrates the OMAP™ 37xx platform of Texas Instruments®, an application Processor integrating a Cortex™ A8 core. The processor is available in different versions, in order to meet all kind of customers needing.

    Informations supplémentaires

    Informations complémentaires

    Processeur

    Texas Instruments® OMAP™ 37xx Family:
    AM3703 (Cortex™ A8 up to 1 GHz core)
    DM3730 (Cortex™ A8, up to 1GHz core + PowerVR
    SGX™ Graphics Accelerator + Up to 800MHz
    TMS320C64x+™ DSP Core

    Max Cores
    1
    Mémoire
    Mobile DDR 128 / 256MB / 512 MB onboard
    Interfaces vidéo
    LVDS Single/Dual Channel 18/24 Bit
    Résolution vidéo
    LVDS, up to 1366 x 768
    Interfaces vidéo
    SINGLE CHANNEL LVDS, DUAL CHANNEL LVDS
    Stockage de masse
    256 MB / 512MB / 1GB NAND Flash
    eMMC soldered onboard up to 16GB
    Networking
    10/100 Base-T interface
    USB
    1x USB OTG
    2x USB 2.0 Host
    Audio
    AC’97 Audio Interface
    Ports série
    2 x COM ports

    CAN interface
    Autres interfaces

    MMC/HC MMC/SD/SDHC/SDIO interface
    Video Input Port / Camera Connector
    LPC Bus
    SMBus
    SPI interface
    I2C bus
    JTAG

    Système d'exploitation
    Microsoft® Windows® CE 6.0

    Linux
    Température d'exploitation

    0°C ÷ +70°C (commercial version)
    -40°C ÷ +85°C (industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    70x70 mm (2.76” x 2.76”)
    Logiciel

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Documents
    Data Sheet
    Manual
    • quadmo747_x_omap3_manual_rel1_5.pdf*

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Q7-796

    Q7-796
    • ÉVALUER NOS PRODUITS

      Max. 3 pcs par code article
    • PRIX ÉCHANTILLONNAGE

      Frais d'expédition inclus
    • UNIQUEMENT B2B

      Support technique fourni exclusivement pour les entreprises
    Computer on Module based on the Texas Instruments® OMAP™ 37xx Family
    Code article SKU Description article Configuration article Acheter des échantillons en ligne Nous contacter comparer
    M796-LLMCFBBI Qseven OMAP DM3730 OMAP3 DM3730CUSD100 @1GHz - 512MB 200MHz DDR SDRAM - SSD 1GB - 10/100 ETH - eMMC 4GB - CAMERA Connector - CAN Controller - Ind. Temp AJOUTER POUR COMPARER
    M796-FFPBCBBC Qseven OMAP DM3730 OMAP DM3730CUS100 @1GHz, 512MB 200MHz DDR SDRAM, SSD 512MB,10/100 ETH, eMMC 8GB, CAMERA Connector, CAN Controller (commercial temp.) AJOUTER POUR COMPARER
    M796-MLQCFBBI Qseven OMAP AM3703 OMAP AM3703CUSD100 @1GHz - 512MB 200MHz DDR SDRAM, SSD 512MB, 10/100 ETH, eMMC 4GB, CAMERA Connector, CAN Controller (industrial temp.) AJOUTER POUR COMPARER

    • Automatisation industrielle
    • Dispositifs
    • IdO
    • Médical
    • Transports
    Top