SBC-C43

3.5" SBC with NXP i.MX8 Applications Processors

Product status

Development
Sampling
Production
Available in Industrial Temperature Range

Contact us for more information and quotes

CPU

NXP i.MX 8 Family

Graphics

2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit/XVSX (QuadPlus and Quad)

Connectivity

2x Gigabit Ethernet interfaces

Memory

Soldered down LPDDR4

Product details

Technical Info

  • Description
    3.5" SBC Industrial ARM solution for IoT edge computing applications
  • Processor

    NXP i.MX 8 Family:
    i.MX 8QuadMax: 2x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F
    i.MX 8QuadPlus: 1x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F
    i.MX 8Quad: 4x ARM® Cortex®-A53 + 2x Cortex®-M4F

  • Max Cores
    8
  • Memory

    Soldered down LPDDR4 memory, 64-bit interface, 1600MHz.
    Base configuration 2GB, up-scalable to 4GB, 6GB, 8GB

  • Graphics

    2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit / XVSX (QuadPlus and Quad)
    1x embedded VPU, supporting H.265 (4K30) and H.264 (1080p60) decoding and H.264 (1080p30) encoding
    Supports 4 independent video outputs (total combined resolution 4K)

  • Video Interfaces

    OUTPUTS:
    HDMI 2.0a Tx interface
    Optional eDP 1.4 interface
    Single/Dual-Channel 18-/24- bit LVDS interface

    INPUTS:
    HDMI 2.0a Rx interface
    2x 4-lanes MIPI-CSI Camera interfaces

  • Video Resolution

    HDMI: Up to UltraHD (4K)
    LVDS, eDP: up to 1080p

  • Mass Storage

    eMMC 5.1 Drive soldered on-board, up to 32GB
    1x S-ATA interface available on M.2 Socket 2 Key B Slot (interface shared with PCI-e x1)
    microSD Card Slot
    4MB QuadSPI Flash NAND (boot device only)

  • Networking

    2x Gigabit Ethernet interfaces
    Combo WiFi 802.11 a/b/g/n/ac + BT LE 4.2 module with ceramic SMT antennas on-board
    M.2 Socket 2 Key B Slot for M.2 Modems
    M.2 Socket1 Key E Slot for WiFi + BT external modules

  • USB

    1 x USB 3.0 Host port on Type-A socket
    1x USB 2.0 OTG port on micro-AB socket
    1x USB 2.0 Host port on external Type-A socket
    1x USB 2.0 Host port on internal connector
    2 x USB 2.0 ports available on M.2 Key B and Key E slots

  • Audio

    I2S Audio Codec
    Mic In and Line Out interfaces, available on a single combo TRRS connector

  • Serial Ports

    1x UART (RS-232 level)
    1x UART RS-485/RS-422 configurable
    1x UART TTL level
    3x CAN interfaces

  • Other Interfaces

    4x Analog Inputs
    6x GPIOs
    SPI interface
    I2C interface
    Embedded additional RTC circuitry for lowest power consumption
    SIM dedicated slot + programmable electronic SIM on-board

  • Power Supply

    +12VDC ± 10%

  • Operating System

    Wind River Linux
    Yocto
    Android

  • Operating Temperature

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C  (Industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

  • Dimensions
    146 x 102 mm (5,75” x 4,02”)

Part Number

  • The ordering code for samples will be available soon.

    Part number description
    If you are interested in this product please contact us
    Contact us for more informations or quotes
    CONTACTEZ-NOUS

Related Products

SC43-DISS-1-PK
SBC-C43 Heat Spreader (PASSIVE)
Production
View Product