Benvenuti nel sito SECO S.p.A.

×

Registration

Profile Information

  • Login Data

    ”or login”

    First name is required!
    Last name is required!
    Tax/Vat Number is required!
    Company is required!
    VAT Number is required!
    Country is required!
    First name is not valid!
    Last name is not valid!
    This is not an email address!
    Email address is required!
    This email is already registered!
    Password is required!
    Enter a valid password!
    Please enter 6 or more characters!
    Please enter 16 or fewer characters!
    Password does not match!
    Terms and Conditions are required!
    Email or Password is wrong!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleaseclick here

    More Views

    SBC-B08

    SBC with NXP i.MX 6SoloX Processor

    • NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
    • up to 2x Fast Eth; optional WiFi + BT LE
    • Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    • 32-bit DDR3L memory soldered on-board, up to 1GB
    Available in Industrial Temperature Range

      SBC-B08

    SBC-B08

    SBC-A62-J

    SBC-A62-J

    μQ7-A76-J

    μQ7-A76-J

    SYS-A62-10

    SYS-A62-10

     
    Product Development Status
    Processor
    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

    NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
    SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
    SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
    SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
    SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

    Intel® Atom™ E3825, Dual Core @1.33GHz, 1MB Cache, 6W TDP
    Intel® Atom™ E3815, Single Core @1.46GHz, 512KB Cache, 5W TDP
    Intel® Celeron® N2807, Dual Core @1.58GHz, 1MB Cache, 4.3W TDP

    Multicore NXP i.MX 6 processor family
    SYS-A62-10/SOLO: i.MX6S Solo, 1 x ARM Cortex-A9 @1 GHz Core
    SYS-A62-10/LITE: i.MX6DL Dual Lite, 2 x ARM Cortex-A9 @1 GHz Cores
    SYS-A62-10/QUAD: i.MX6Q Quad, 4 x ARM Cortex-A9 @1 GHz Cores
    Chipset
    ...
    ...
    ...
    ...
    Max Cores
    1 + 1
    4
    2
    0
    Max Thread
    ...
    0
    2
    0
    Memory

    Soldered on-board DDR3L memory, 32-bit interface
    SYS-B08-BASIC/D: 512MB
    SYS-B08-FULL/D: 1GB

    Soldered on-board DDR3L memory***:
    SBC-A62-J-SOLO: 512MB 32-bit interface
    SBC-A62-J-LITE: 1GB 64-bit interface
    SBC-A62-J-PLUS: 2GB 64-bit interface
    SBC-A62-J-QUAD: 1GB 64-bit interface

    *** For additional configurability please contact SECO

    Soldered onboard DDR3L memory
    E3825, E3815:  up to 4GB Single-Channel DDR3L @ 1066MHz
    N2807: up to 4GB Single-Channel DDR3L @ 1333MHz

    On-board DDR3L soldered memory;
    SYS-A62-10/SOLO: 512MB 32-bit
    SYS-A62-10/LITE: 1GB 64-bit
    SYS-A62-10/QUAD: 1GB 64-bit
    Graphics

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
    OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
    SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

    Integrated Intel® HD Graphics 4000 Series controller
    Dual independent display support
    HW decoding of H.264, MPEG2, MVC, VC1, VP8, MJPEG formats
    HW encoding of H.264, MPEG2 and MVC formats

    2D, OpenGL® ES2.0 3D HW accelerator
    OpenVG™ accelerator (SYS-A62/10/QUAD only)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    Video Interfaces

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
    HDMI interface 1.4

    Multimode Display Port (DP++) interface
    18 / 24 bit Dual Channel LVDS interface

    10,1” LVDS display, resolution 1280 x 800, 30K hours life
    P-Cap (Projected Capacitive touch screen), with 2mm glass cover
    Glass Hardness IK08, Surface Hardness 8H (450g)
    Video Resolution

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    HDMI: up to 1920 x 1080p
    LVDS: up to 1920 x 1200

    DP++ (HDMI compatible) Up to 2560x1600@60Hz
    LVDS interface Up to 1920x1200@60Hz
    ...
    Mass Storage

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    4GB eMMC drive soldered onboard***
    microSD Card slot
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

    *** For additional configurability please contact SECO

    2 x external S-ATA channels
    SD interface
    Optional eMMC drive soldered onboard
    On-board 4GB eMMC drive
    microSD Card Slot
    SATA Connector (SYS-A62-10/QUAD only)
    Networking

    SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector
    SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard

    Gigabit Ethernet connector
    Internal USB connector for Wi-Fi Module

    Gigabit Ethernet interface
    Gigabit Ethernet connector
    Optional WiFi pluggable module
    USB
    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header
    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    1 x USB 3.0 Host port
    4 x USB 2.0 Host ports (one shared with USB 3.0 interface)
    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    PCI-e
    ...
    ...
    3 x PCI-e x1 lanes (Gen2)
    ...
    Audio
    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header

    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
    AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

    HD Audio Interface
    SYS-A62-10/LITE and SYS-A62-10/QUAD: Realtek ALC655
    AC’97 Audio Codec with Mic-In, Line-Out audio Jacks
    Serial Ports

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    Debug UART interface, TTL voltage level.
    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
    Other serial interfaces on the expansion connector:
    SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
    SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

    1 x Serial Port (TTL interface, Tx/Rx only)
    Dedicated Serial ports:
    SYS-A62-10/SOLO: 2 x RS-232 ports 
    SYS-A62-10/LITE: 2 x RS-232 ports, 1 x CAN port
    SYS-A62-10/QUAD: 2 x RS-232 ports, 1 x RS-485 port, 1 x CAN port

    Other serial ports can be realised on expansion connector (see ""Other interfaces"")
    Other Interfaces

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
    Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

    * Please note that some of these interfaces are factory options, other configurations are made via SW.

    I2C bus
    LPC Bus
    SM Bus
    Thermal / FAN Management
    PWR Management signals

    MIPI-CSI Camera connector
    Programmable expansion connector with:
    SYS-A62-10/SOLO: up to 22 GPIOs, 2 x TTL CAN ports, 1 x UART TTL, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    SYS-A62-10/LITE: up to 20 GPIOs, 1 x TTL CAN port, 1 x UART TTL, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    SYS-A62-10/QUAD: up to 18 GPIOs, 1 x TTL CAN port, 3 x PWM, 2 x I2C, SD, SPI or S/PDIF interfaces
    Power Supply

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    +12VDC; Additional embedded Low Power RTC;
    SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

    +5VDC ± 5%

    +12VDC
    SYS-A62-10/SOLO and SYS-A62-10/LITE: internal i.MX6 RTC, require external battery for time/data retention
    SYS-A62-10/QUAD: low power RTC with on-board battery

    Power Consumption
    ...
    ...
    ...
    ...
    Operating System
    Linux

    - Free Android and Linux community BSP available at UDOO.org
    - SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
    - Yocto Guideline valid for SECO BSP

    Microsoft® Windows 7
    Microsoft® Windows 8.1
    Microsoft® Windows 10
    Microsoft® Windows 10 IoT
    Microsoft® Windows Embedded Standard 7
    Microsoft® Windows Embedded Standard 8
    Microsoft® Windows Embedded Compact 7
    Linux
    Yocto

    Linux
    Yocto
    Windows® Embedded Compact 7
    Operating Temperature

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)**
    For industrial temp. (-40°C ÷ +85°C)** please contact us

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +60°C

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ 50°C

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    89.5 x 87 mm (3.52” x 3.43”)
    110 x 86.5 mm (4.5” x 3.7”)
    40 x 70 mm (1.57 x 2.76)
    269,60 x 189,20 x 17,17 mm
    Security
    N/A
    N/A
    N/A
    N/A
    BIOS
    N/A
    N/A
    N/A
    N/A
    Embedded Controller Functionalities
    N/A
    N/A
    N/A
    N/A

    Description

    Details

    SBC-B08 is a new-generation all-in-one low-cost computer designed by SECO, equipped with a NXP i.MX 6SoloX applications processor able to run Linux. SBC-B08 is a revolutionary product in terms of connectivity, interactivity with the real world and cost: a new concept of single board computer ready for Internet of Things applications and for the Post-PC era.
    Additional Information

    Additional Information

    Processor
    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
    Max Cores
    1 + 1
    Memory

    Soldered on-board DDR3L memory, 32-bit interface
    SYS-B08-BASIC/D: 512MB
    SYS-B08-FULL/D: 1GB

    Graphics

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Video Interfaces

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    Video Resolution

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    Mass Storage

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    Networking

    SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector
    SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard

    USB
    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header
    Audio
    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header
    Serial Ports

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    Other Interfaces

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    Power Supply

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    Operating System
    Linux
    Operating Temperature

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    89.5 x 87 mm (3.52” x 3.43”)
    Software

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Documents

    * User need to register to site before download reserved files. Please login if you are a registered user.

    SBC-B08

    SBC-B08
    • EVALUATE OUR PRODUCTS

      Max. 3 pcs per part number
    • SAMPLING PRICE

      Shipping costs included
    • BUSINESS TO BUSINESS ONLY

      Technical support provided exclusively to businesses
    SBC with NXP i.MX 6SoloX Processor
    sku part number part number description part number configuration buy samples online contact us compare
    SYS-B08-I-FULL/D SBC - SBC-B08 Full version: NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 1GB RAM - 8GB eMMC - 2x FastETH - Wi-Fi/BLE - RTC LP - RS-485 - RS-232 - CAN - Ind. Temp. w/ Heatsink SBC - SBC-B08 Full version: NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 1GB RAM - 8GB eMMC - 2x FastETH - Wi-Fi/BLE - RTC LP - RS-485 - RS-232 - CAN - Ind. Temp. w/ Heatsink Add to Compare
    SYS-B08-I-BASIC/D SBC - SBC-B08 Basic version: NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 512MB RAM - 1x FastETH - RTC LP - RS-485 - RS-232 - CAN - Ind. Temp. w/Heatsink SBC - SBC-B08 Basic version: NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 512MB RAM - 1x FastETH - RTC LP - RS-485 - RS-232 - CAN - Ind. Temp. w/Heatsink Add to Compare
    SYS-B08-BASIC/D SBC - SBC-B08 Basic version: NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 512MB RAM - 1x FastETH - RTC LP - RS-485 - RS-232 - CAN - Comm. Temp. w/Heatsink SBC - SBC-B08 Basic version: NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 512MB RAM - 1x FastETH - RTC LP - RS-485 - RS-232 - CAN - Comm. Temp. w/Heatsink Add to Compare
    SYS-B08-FULL/D SBC - SBC-B08 Full version: NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 1GB RAM - 8GB eMMC - 2x FastETH - Wi-Fi/BLE - RTC LP - RS-485 - RS-232 - CAN - Comm. Temp. w/ Heatsink SBC - SBC-B08 Full version: NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 1GB RAM - 8GB eMMC - 2x FastETH - Wi-Fi/BLE - RTC LP - RS-485 - RS-232 - CAN - Comm. Temp. w/ Heatsink Add to Compare

    • Building Automation/Domotics
    • Devices
    • Industrial Automation
    • Infotainment/Vending
    • IoT
    Top