Benvenuti nel sito SECO S.p.A.

×

Registration

Profile Information

  • Login Data

    ”or login”

    First name is required!
    Last name is required!
    Tax/Vat Number is required!
    Company is required!
    VAT Number is required!
    Country is required!
    First name is not valid!
    Last name is not valid!
    This is not an email address!
    Email address is required!
    This email is already registered!
    Password is required!
    Enter a valid password!
    Please enter 6 or more characters!
    Please enter 16 or fewer characters!
    Password does not match!
    Terms and Conditions are required!
    Email or Password is wrong!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleaseclick here

    SBC-984

    SBC with NXP i.MX 6 Processor

    • Single-, Dual- and Quad- Core (ARM Cortex™A9 Cores)
    • miniPCI-e slot; CAN Bus; Wi-Fi add-on module;
    • 2D/3D dedicated graphics processors
    • Up to 2GB DDR3L on-board
    Available in Industrial Temperature Range

      SBC-984

    SBC-984

    SYS-B08-7/BD

    SYS-B08-7/BD

    μQ7-A75-J

    μQ7-A75-J

    Q7-928

    Q7-928

     
    Product Development Status
    Processor

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

    NXP i.MX6 Family, based on ARM® CORTEX-A9 processors

    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6DP DualPlus - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core
    Chipset
    ...
    ...
    ...
    ...
    Max Cores
    4
    1 + 1
    2
    4
    Max Thread
    0
    ...
    ...
    0
    Memory
    Up to 2GB DDR3L on-board (up to 1GB with i.MX6S)
    512MB RAM

    Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F

    Up to 4GB DDR3L on-board (up to 2GB with i.MX6S)
    Graphics

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q)
    Supports up to 3 independent displays with i.MX6D and i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Supports 2 independent displays

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES 2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D, i.MX6DP and i.MX6Q)
    Enhanced 2D and 3D graphics with i.MX6DP
    Supports up to 3 independent displays with i.MX6D, i.MX6DPand i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Video Interfaces

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface
    Video Input Port / Camera connector (only with PCB rev. C or higher)

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4
    Video Input Port / Camera Connector

    Video Resolution
    LVDS, up to 1920x1200
    HDMI, up to 1080p

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    LVDS, resolution up to 1920x1200
    HDMI, resolution up to 1080p

    LVDS, up to 1920x1200
    HDMI, up to 1080p

    Mass Storage
    On-board eMMC drive, up to 8 GB
    mSATA Half-size slot (shared with miniPCI-express)

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    On-board eMMC drive, up to 8 GB
    SD / MMC / SDIO interface
    Internal SPI Flash for booting

    On-board eMMC drive, up to 32 GB
    SD / MMC / SDIO interface
    1 x μSD Card Slot on-board
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)

    Networking
    Gigabit Ethernet connector
    1x FastETH
    Fast Ethernet (10/100) interface
    Gigabit Ethernet interface
    USB
    3 x standard USB 2.0 Type A
    1 x USB OTG on micro-AB connector
    Internal USB for optional WiFi module
    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header

    1 x USB OTG interface
    1 x USB 2.0 Host interface

    1 x USB OTG interface
    4 x USB 2.0 Host interfaces

    PCI-e
    miniPCI-express slot, shared with mSATA (only PCI-e 1.1 and Gen2 are supported)
    ...

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
    Audio
    AC’97 Audio Codec

    Mic In, Line out internal pin header connector
    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header
    I2S / AC’97 Audio Interface
    AC'97 Audio Interface
    I2S
    Serial Ports
    1 x RS-232 serial port
    TTL debug UART (Tx, RX only)
    CAN interface internal connector

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    ...

    2 x serial ports (TTL interface)
    CAN port interface

    Other Interfaces
    I2C touch Connector
    Internal connector for power and reset buttons

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
    - Additional SD interface
    - Up to 4 UARTs
    - CAN interface
    - Watchdog(s)
    - I2C interfaces
    - PWM outputs
    - SPI interface
    - Additional Audio interface

    (*) not all the combinations are allowed simultaneously Power Management Signals

    I2C Bus
    LPC Bus
    SM Bus
    Power Management Signals

    Power Supply
    +12VDC ± 10%
    Embedded additional RTC circuitry for lowest power consumption
    Optional RTC Battery with lead cable and connector

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    +5VDC ± 5%
    Optional Low Power RTC

    +5VDC ± 5%

    Power Consumption
    ...
    ...
    ...
    ...
    Operating System
    Linux
    Android
    Linux

    Linux
    Yocto

    Linux
    Yocto
    Microsoft® Windows Embedded Compact 7

    Operating Temperature

    0°C  ÷ +70 °C (commercial version)
    -40°C ÷ +85°C (industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Commercial

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (Industrial temp.)* 

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +70°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    80 x 67 mm (3,15” x 2,64”)
    189.60 x 121.40 x 28.20 mm
    40x70 mm (1.57” x 2.76”)
    70x70 mm (2.76” x 2.76”)

    Description

    Details

    SBC-984 is a Single Board Computer (only 80 x 67 mm) based on i.MX6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex™ A9 ARM Core (up to Quad Core processors), ideal for applications requiring multimedia capabilities and/or high levels of parallel computing, maintaining advantages offered by low-power consuming ARM architecture in an extremely reduced space.
    Additional Information

    Additional Information

    Processor

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    Max Cores
    4
    Memory
    Up to 2GB DDR3L on-board (up to 1GB with i.MX6S)
    Graphics

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q)
    Supports up to 3 independent displays with i.MX6D and i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Video Interfaces

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface
    Video Input Port / Camera connector (only with PCB rev. C or higher)

    Video Resolution
    LVDS, up to 1920x1200
    HDMI, up to 1080p
    Mass Storage
    On-board eMMC drive, up to 8 GB
    mSATA Half-size slot (shared with miniPCI-express)
    Networking
    Gigabit Ethernet connector
    USB
    3 x standard USB 2.0 Type A
    1 x USB OTG on micro-AB connector
    Internal USB for optional WiFi module
    PCI-e
    miniPCI-express slot, shared with mSATA (only PCI-e 1.1 and Gen2 are supported)
    Audio
    AC’97 Audio Codec

    Mic In, Line out internal pin header connector
    Serial Ports
    1 x RS-232 serial port
    TTL debug UART (Tx, RX only)
    CAN interface internal connector
    Other Interfaces
    I2C touch Connector
    Internal connector for power and reset buttons
    Power Supply
    +12VDC ± 10%
    Embedded additional RTC circuitry for lowest power consumption
    Optional RTC Battery with lead cable and connector
    Operating System
    Linux
    Operating Temperature

    0°C  ÷ +70 °C (commercial version)
    -40°C ÷ +85°C (industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensions
    80 x 67 mm (3,15” x 2,64”)
    Software
    SECO WIKI
    BSP
    • SECO BSP*
    Linux-YOCTO
    • Yocto BSP*

    * User need to register to site before download reserved files. Please login if you are a registered user.

    SBC-984

    SBC-984
    • EVALUATE OUR PRODUCTS

      Max. 3 pcs per part number
    • SAMPLING PRICE

      Shipping costs included
    • BUSINESS TO BUSINESS ONLY

      Technical support provided exclusively to businesses
    SBC with NXP i.MX 6 Processor
    sku part number part number description part number configuration buy samples online contact us compare
    S984-1110-1000-C1 P/N SECOμSBC-i.MX6 1 i.MX6 Solo @1 GHz, DDR3L 512MB, eMMC 4GB, RTC low power (commercial temp.) Add to Compare
    S984-1220-1000-C1 micro SBC Freescale™ i.MX6S i.MX6 Solo @1 GHz - DDR3L 1GB - eMMC 8GB - RTC low power - Com. Temp. Add to Compare
    S984-2310-1000-C1 P/N SECOμSBC-i.MX6 4 i.MX6 Dual Lite @1 GHz, DDR3L 1GB, eMMC 4GB, RTC low power (commercial temp.) Add to Compare
    S984-2310-1000-I1 P/N SECOμSBC-i.MX6 5 i.MX6 Dual Lite @800 MHz, DDR3L 1GB, eMMC 4GB, RTC low power (industrial temp.) Add to Compare
    S984-2410-1000-C1 P/N SECOμSBC-i.MX6 6 i.MX6 Dual Lite @1 GHz, DDR3L 2GB, eMMC 4GB, RTC low power (commercial temp.) Add to Compare
    S984-3310-1000-C1 P/N SECOμSBC-i.MX6 7 i.MX6 Dual @1 GHz, DDR3L 1GB, eMMC 4GB, RTC low power (commercial temp.) Add to Compare
    S984-3410-1000-C1 micro SBC Freescale™ i.MX6D i.MX6 Dual @1 GHz - DDR3L 2GB - eMMC 4GB - RTC low power - Com. Temp. Add to Compare
    S984-4310-1000-C1 P/N SECOμSBC-i.MX6 8 i.MX6 Quad @1 GHz, DDR3L 1GB, eMMC 4GB, RTC low power (Commercial temp.) Add to Compare
    S984-4410-1000-C1 P/N SECOμSBC-i.MX6 10 i.MX6 Quad @1 GHz, DDR3L 2GB, eMMC 4GB, RTC low power (commercial temp.) Add to Compare
    S984-4410-1000-I1 P/N SECOμSBC-i.MX6 11 i.MX6 Quad @ 800MHz, DDR3L 2GB, eMMC 4GB, RTC low power (industrial temp.) Add to Compare

    • Industrial Automation
    • Infotainment/Vending
    • Medical
    • Security/Surveillance
    • Transportation
    Top