Login
Registration
Profile Information
Login Data
”or login”
CSM-B79
SMARC 2.0 evaluation carrier board
- Description
-
Details
The SMARC Carrier Board CSM-B79 is a full featured carrier board for SMARC Rel. 2.0 compliant CPU modules.
This carrier board can be used with any SMARC Rel. 2.0 compliant module without incompatibilities and/or loss of functionalities. The board has been specifically designed for taking advantage of all possible features that can be offered by x86 and/or ARM architectures on SMARC modules.CSM-B79 has been developed most of all as a development board to explore the possibilities offered by SMARC modules, but it could also be a good solution for low volumes production for companies that do not want or need to develop customised carrier board.
AVAILABLE FOR:
- Additional Information
-
Additional Information
Video Interfaces LVDS connector, interface shared with 2 x eDP/DSI connectors
Backlight control + LCD selectable voltages dedicated connector
DP++ dedicated connector
HDMI connector (interface shared with USB 3.1 Type-C alternate mode port)
2x CSI Camera input interfacesMass Storage SATA M 7p connector with dedicated power connector,
interface shared with M.2 Socket 2 2242 / 2260 Key B SSD slot
microSD Card SlotNetworking 2 x RJ-45 Gigabit Ethernet connectors
M.2 Socket1 2230 Key E Slot for WiFi Modules (interface shared with PCI-e x 4 slot)
M.2 Socket2 2260 Key E Slot for WWAN Modem Modules (interface shared with PCI-e x 4 slot), connected to on-board microSIM slotUSB 1 x USB 3.0 type A Socket
1 x USB 2.0 type A Socket
1 x USB OTG micro-AB Socket
1 x USB 3.1 Type-C Socket, with Alternate Mode and Power Delivery functionalityPCI-e PCI-e x4 slot, interface shared with 2 x PCI-e x1 Slot and M.2 Slots
Audio Mic In Jack, Line Out Jack
Onboard I2S Audio Codec (TI TLV320AIC3204) + HD Audio
Codec (Cirrus Logic CS4207)Serial Ports 2 x CAN ports
2 x RS-232/RS-422/RS-485 configurable serial ports on internal pin header
2 x Serial ports (Tx/Rx signals only, TTL level) on feature pin headerOther Interfaces eSPI pin header + Flash Socket
SPI pin header + Flash Socket
I2C EEPROM Socket
4 x 7-segment LCD displays for POST codes
Feature pin header with 8x GPIOs, I2C, SM Bus, Watchdog and Power Management Signals
4x GPIOs dedicated connector
FAN connector
RTC Coin cell battery holder
Optional Debug USB port on mini-B Socket
Boot selection switches
JTAG connectorPower Supply 9-21V through dedicated Mini-Fit Jr 2x2 power connector or USB Type-C connector
6-17V through 2/3/4 Cell Smart Battery ConnectorOperating Temperature -40°C ÷ +85°C (industrial range)
*All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensions 345 x 170mm (13.58” x 6.69”)
CSM-B79
-
EVALUATE OUR PRODUCTS
Max. 3 pcs per part number -
SAMPLING PRICE
Shipping costs included -
BUSINESS TO BUSINESS ONLY
Technical support provided exclusively to businesses
SMARC 2.0 evaluation carrier board
| sku part number | part number description | part number configuration | buy samples online | contact us | compare |
| RB79-0000-0000-C0 | SMARC Carrier Board | Carrier Board for SMARC 2.0 compliant modules | Add to Compare |
Company Profile
SECO
Catalogue