Benvenuti nel sito SECO S.p.A.

×

Registro

Información del perfil

  • Datos de acceso

    o inicie sesión

    ¡Se requiere el nombre!
    ¡Se requiere el apellido!
    ¡Se requiere el código fiscal/número de IVA!
    ¡Se requiere el nombre de la empresa!
    ¡Se requiere el número de IVA!
    ¡Se requiere el país!
    ¡El nombre no es válido!
    ¡El apellido no es válido!
    ¡Esto no es una dirección de correo electrónico!
    ¡Se requiere la dirección de correo electrónico!
    ¡Esta dirección de correo electrónico ya está registrada!
    ¡Se requiere contraseña!
    ¡Introduzca una contraseña válida!
    ¡Introduzca 6 caracteres o más!
    ¡Debe introducir 16 caracteres o menos!
    ¡Las contraseñas no coinciden!
    ¡Son obligatorios los Términos y condiciones!
    ¡La dirección de correo electrónico o la contraseña son incorrectas!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleaseclick here

    More Views

    SBC-C23

    Smart Edge Compute Unit based on NXP i.MX 6SoloX Processor

    • NXP i.MX6SX SoloX

    • 2x Fast Eth; WiFi; BLE; 3x Multicolor Signalling LEDs; 1x RS-232 port; 1x RS-485 port; 2x CAN port
    • Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    • 32-bit DDR3L memory soldered onboard

    Disponible dentro del rango de temperaturas industriales

      SBC-C23

    SBC-C23

    SBC-A62-J

    SBC-A62-J

    SBC-B08

    SBC-B08

     
    Estado de desarrollo del producto
    Procesador

    NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

    NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
    SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
    SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
    SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
    SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
    Chipset
    ...
    ...
    ...
    Máx. núcleos
    ...
    4
    1 + 1
    Rodadura máx.
    ...
    0
    ...
    Memoria

    32-bit DDR3L memory soldered onboard, up to 1GB

    Soldered on-board DDR3L memory***:
    SBC-A62-J-SOLO: 512MB 32-bit interface
    SBC-A62-J-LITE: 1GB 64-bit interface
    SBC-A62-J-PLUS: 2GB 64-bit interface
    SBC-A62-J-QUAD: 1GB 64-bit interface

    *** For additional configurability please contact SECO

    Soldered on-board DDR3L memory, 32-bit interface
    SYS-B08-BASIC/D: 512MB
    SYS-B08-FULL/D: 1GB

    Gráficos

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
    OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
    SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Interfaces vídeo

    Optional Single Channel 18- / 24- bit LVDS connector w/ Touch Screen (I2C signals)
    Max resolution 1366x768 @60 Hz, 24bpp

    1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
    HDMI interface 1.4

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    Resolución de vídeo
    ...

    HDMI: up to 1920 x 1080p
    LVDS: up to 1920 x 1200

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    Almacenamiento en masa

    8GB eMMC drive on-board
    μSD Card slot
    1MB SPI Flash

    4GB eMMC drive soldered onboard***
    microSD Card slot
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

    *** For additional configurability please contact SECO

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    Red

    Up to 2x FastEthernet RJ-45 ports
    Optional Single Band or Dual Band WiFi (802.11 b/g/n) + BT LE combo module with on-board PCB antennas or u/FL connectors, factory alternatives
    Optional LTE-Cat4 Modem with integrated GNSS, with up to 3 external antennas

    Gigabit Ethernet connector
    Internal USB connector for Wi-Fi Module

    SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector
    SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard

    USB

    1 x USB 2.0 Type-A socket
    1 x USB 2.0 OTG on micro-AB connector

    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header
    PCI-e
    ...
    ...
    ...
    Audio

    On-board buzzer

    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
    AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header
    Puertos en serie

    All available on expansion connector:
    - 1 x RS-232 port
    - 1x RS-485 port
    - 2 x CAN port

    Debug UART interface, TTL voltage level.
    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
    Other serial interfaces on the expansion connector:
    SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
    SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    Otras interfaces

    M.2 Socket 1 Key E 2230 (USB + PCI-e x1 interfaces) Slot
    M.2 Socket 2 Key B 2242 (USB interface) Slot
    microSIM slot or electronic SIM soldered on-board for the optional Modem and/or the M.2 Key B Slot
    3x Multicolor signalling LEDs
    Reset Button
    Expansion PCB terminal block with:
    -4x analog inputs
    -I2C
    2x PWM

    Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
    Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

    * Please note that some of these interfaces are factory options, other configurations are made via SW.

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    Alimentación

    +12VDC
    DC power jack and 2-poles PCB terminal block for voltage supply
    Optional Li-Ion Rechargeable battery

    +12VDC; Additional embedded Low Power RTC;
    SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    Consumo energético
    ...
    ...
    ...
    Sistema operativo

    Wind River Linux

    Free Android and Linux community BSP available at UDOO.org
    SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
    Yocto Guideline valid for SECO BSP
    Linux

    Linux
    Yocto

    Temperatura de funcionamiento

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C  (Industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)**
    For industrial temp. (-40°C ÷ +85°C)** please contact us

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensiones
    153 x 89,5 mm (6” x 3,5”)
    110 x 86.5 mm (4.5” x 3.7”)
    89.5 x 87 mm (3.52” x 3.43”)
    Seguridad
    ...
    ...
    ...
    BIOS
    ...
    ...
    ...
    Funcionalidades del controlador integrado
    ...
    ...
    ...
    CAN Bus
    ...
    ...
    ...
    Functional Safety Features
    ...
    ...
    ...

    Descripción

    Details

    The SYS-C23 is a Smart Edge Compute Unit, built on NXP i. MX 6SoloX Processor, enables multi core edge computing and networking, while ensuring wide connectivity. As far as memory is concerned, the device features a 32-bit DDR3L memory soldered on-board, up to 1 GB. When it comes to interfaces the board is plentiful: networking interfaces - such as 2x Fast Ethernet RJ-45 ports, Wifi, BT LE combo module with on-board antenna - but also other interfaces like 2x CAN port, 4x analog inputs, I2C, 2x PWM and many others. The device is indeed a multiprotocol bridging for industrial PLCs and smart factory devices. Fields of application include Home Automation, Industrial Internet of Things and Surveillance among the many.

    Información adicional

    Additional Information

    Procesador

    NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

    Memoria

    32-bit DDR3L memory soldered onboard, up to 1GB

    Gráficos

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Interfaces vídeo

    Optional Single Channel 18- / 24- bit LVDS connector w/ Touch Screen (I2C signals)
    Max resolution 1366x768 @60 Hz, 24bpp

    Almacenamiento en masa

    8GB eMMC drive on-board
    μSD Card slot
    1MB SPI Flash

    Rojo

    Up to 2x FastEthernet RJ-45 ports
    Optional Single Band or Dual Band WiFi (802.11 b/g/n) + BT LE combo module with on-board PCB antennas or u/FL connectors, factory alternatives
    Optional LTE-Cat4 Modem with integrated GNSS, with up to 3 external antennas

    USB

    1 x USB 2.0 Type-A socket
    1 x USB 2.0 OTG on micro-AB connector

    Audio

    On-board buzzer

    Puertos en serie

    All available on expansion connector:
    - 1 x RS-232 port
    - 1x RS-485 port
    - 2 x CAN port

    Otras interfaces

    M.2 Socket 1 Key E 2230 (USB + PCI-e x1 interfaces) Slot
    M.2 Socket 2 Key B 2242 (USB interface) Slot
    microSIM slot or electronic SIM soldered on-board for the optional Modem and/or the M.2 Key B Slot
    3x Multicolor signalling LEDs
    Reset Button
    Expansion PCB terminal block with:
    -4x analog inputs
    -I2C
    2x PWM

    Alimentación

    +12VDC
    DC power jack and 2-poles PCB terminal block for voltage supply
    Optional Li-Ion Rechargeable battery

    Sistema operativo

    Wind River Linux

    Temperatura de funcionamiento

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C  (Industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensiones
    153 x 89,5 mm (6” x 3,5”)
    Software

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Documentos

    * User need to register to site before download reserved files. Please login if you are a registered user.

    SBC-C23

    SBC-C23
    • EVALUACIÓN DE NUESTROS PRODUCTOS

      Máx. 3 unidades por referencia de producto
    • PRECIO DE MUESTRAS

      Incluidos gastos de nvío
    • PARA EMPRESAS ÚNICAMENTE

      Apoyo técnico exclusivo para empresas
    Smart Edge Compute Unit based on NXP i.MX 6SoloX Processor
    número de pieza sku descripción número de pieza configuración número de pieza compra muestras en línea contacto comparar
    SC23-0211-2411-C0 SBC - NXP i.MX6 SoloX SBC - NXP i.MX6 SoloX, 1GB RAM+ 8GB eMMC +SIM-CARD + 2x ETH + WiFi/BT WL1831MOD, LTE Cat-1 Module, Li-Cell 2200mAh +RTC + EEM, Commercial Temperature range Añadir para comparar

    • Automatización industrial
    • Automatización/Domótica de edificios
    • Instrumentos de medida
    • IoT
    • Seguridad/vigilancia
    Top