Benvenuti nel sito SECO S.p.A.

×

Registro

Información del perfil

  • Datos de acceso

    o inicie sesión

    ¡Se requiere el nombre!
    ¡Se requiere el apellido!
    ¡Se requiere el código fiscal/número de IVA!
    ¡Se requiere el nombre de la empresa!
    ¡Se requiere el número de IVA!
    ¡Se requiere el país!
    ¡El nombre no es válido!
    ¡El apellido no es válido!
    ¡Esto no es una dirección de correo electrónico!
    ¡Se requiere la dirección de correo electrónico!
    ¡Esta dirección de correo electrónico ya está registrada!
    ¡Se requiere contraseña!
    ¡Introduzca una contraseña válida!
    ¡Introduzca 6 caracteres o más!
    ¡Debe introducir 16 caracteres o menos!
    ¡Las contraseñas no coinciden!
    ¡Son obligatorios los Términos y condiciones!
    ¡La dirección de correo electrónico o la contraseña son incorrectas!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleaseclick here

    Q7-928

    Qseven® standard module with NXP i.MX 6 Processor

    • Single-, Dual- and Quad- Core (ARM® Cortex® -A9 Cores)
    • 2x serial ports; CAN port
    • 2D/3D dedicated graphics processors
    • up to 4GB DDR3L on-board
    Disponible dentro del rango de temperaturas industriales

      Q7-928

    Q7-928

    SBC-A62-J

    SBC-A62-J

    Q7-C25

    Q7-C25

    Q7-C26

    Q7-C26

     
    Estado de desarrollo del producto
    Procesador
    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6DP DualPlus - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
    SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
    SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
    SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
    SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

    NXP i.MX 8M Family based on ARM Cortex®-A53 cores + general purpose Cortex®-M4 processor:
    i.MX 8M Quad - 4x Cortex®-A53 cores up to 1.5GHz
    i.MX 8M Dual - 2x Cortex®-A53 cores up to 1.5GHz
    i.MX 8M QuadLite - 4x Cortex®-A53 cores up to 1.5GHz, no VPU 

    NXP i.MX 8 Family:
    i.MX 8QuadMax - 2x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores
    i.MX 8QuadPlus - 1x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores

    Chipset
    ...
    ...
    ...
    ...
    Máx. núcleos
    4
    4
    0
    0
    Rodadura máx.
    0
    0
    0
    0
    Memoria
    Up to 4GB DDR3L on-board (up to 2GB with i.MX6S)

    Soldered on-board DDR3L memory***:
    SBC-A62-J-SOLO: 512MB 32-bit interface
    SBC-A62-J-LITE: 1GB 64-bit interface
    SBC-A62-J-PLUS: 2GB 64-bit interface
    SBC-A62-J-QUAD: 1GB 64-bit interface

    *** For additional configurability please contact SECO

    soldered down DDR4-2400 memory, 32-bit interface, up to 4GB

    soldered down LPDDR4-3200 memory, 64-bit interface

    Gráficos

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES 2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D, i.MX6DP and i.MX6Q)
    Enhanced 2D and 3D graphics with i.MX6DP
    Supports up to 3 independent displays with i.MX6D, i.MX6DPand i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
    OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
    SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

    Integrated Graphics Processing Unit, supports 2 independent displays.
    Embedded VPU, supports HW decoding of HEVC,H.264, H.263, MPEG-4, MPEG-2, AVC, VC-1, RV, DivX, VP6, VP8, VP9, JPEG (not for i.MX8M QuadLite).
    Supports OpenGL ES 3.1, Open CL 1.2, OpenGL 2.x, DirectX 11

    Integrated Graphics Processing Unit, supports 2 independent displays.
    Embedded VPU, supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-2, VC-1, RV9, VP8, H.263 and MPEG4 part, HW encoding of AVC/H.264
    Supports OpenGL ES 3.1, Open CL 1.2, OpenGL 3.x, DirectX 11

    Interfaces vídeo

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4
    Video Input Port / Camera Connector

    1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
    HDMI interface 1.4

    HDMI 2.0a / Display Port 1.3 interface, supporting HDCP 2.2 and HDCP 1.4/1.3
    eDP interface or 18- / 24-bit Dual Channel LVDS interface

    HDMI 2.0a / DP 1.3 or eDP 1.4 interface, supporting HDCP 2.2
    Dual Channel or 2 x Single Channel 18- / 24-bit LVDS interface (1 x Single Channel in case of eDP interface available)

    Resolución de vídeo

    LVDS, up to 1920x1200
    HDMI, up to 1080p

    HDMI: up to 1920 x 1080p
    LVDS: up to 1920 x 1200

    HDMI/DP: Up to 4096 x 2160p60
    LVDS/eDP: Up to 1920 x 1080 @ 60Hz

    HDMI / DP / eDP resolution up to 4096x2160 @ 60Hz
    LVDS, resolution up to 1920x1080 @ 60Hz

    Almacenamiento en masa

    On-board eMMC drive, up to 32 GB
    SD / MMC / SDIO interface
    1 x μSD Card Slot on-board
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)

    4GB eMMC drive soldered onboard***
    microSD Card slot
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

    *** For additional configurability please contact SECO

    eMMC 5.0 drive soldered on-board, up to 64GB
    Optional microSD slot on board
    QSPI Flash soldered-onboard

    1x SATA Gen3 interface
    eMMC 5.1 drive soldered on-board
    SD 4-bit interface
    QSPI Flash soldered-on-board

    Red
    Gigabit Ethernet interface

    Gigabit Ethernet connector
    Internal USB connector for Wi-Fi Module

    1 x Gigabit Ethernet interface
    Optional WiFi + BT LE module onboard

    1 x Gigabit Ethernet interface

    USB

    1 x USB OTG interface
    4 x USB 2.0 Host interfaces

    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port

    1 x USB 3.0 OTG Ports
    Up to 4 x USB 2.0 Host Ports

    4 x USB 2.0 Host Ports 
    1 x USB 3.0 Host Port
    1 x USB 2.0 OTG port

    PCI-e
    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
    ...

    1x PCI-e x1 port, optional

    2x PCI-e x1 Gen3 ports

    Audio
    AC'97 Audio Interface
    I2S

    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
    AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

    I2S Audio Interface

    I2S Audio Interface

    Puertos en serie

    2 x serial ports (TTL interface)
    CAN port interface

    Debug UART interface, TTL voltage level.
    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
    Other serial interfaces on the expansion connector:
    SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
    SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

    1x UART Tx/Rx/RTS/CTS (Optional)
    1x Debug UART
    Optional CAN Bus interface (TTL Level)

    1x UART Tx/Rx/RTS/CTS
    1x CAN Bus (TTL level)

    Otras interfaces

    I2C Bus
    LPC Bus
    SM Bus
    Power Management Signals

    Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
    Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

    * Please note that some of these interfaces are factory options, other configurations are made via SW.

    I2C Bus
    SM Bus
    Optional SPI interface
    8 x GPI/Os
    UltraLow Power RTC
    Power Management Signals
    Watchdog

    CSI camera connector
    2x I2C Bus
    SPI interface
    8 x GPI/Os
    Boot select signal
    Power Management Signals
    Watchdog

    Alimentación

    +5VDC ± 5%

    +12VDC; Additional embedded Low Power RTC;
    SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

    +5VDC ±5% and +5VSB (optional)
    +3.3V_RTC

    +5VDC ± 5%
    +3.3V_RTC

    Consumo energético
    ...
    ...
    ...
    ...
    Sistema operativo

    Linux
    Yocto
    Microsoft® Windows Embedded Compact 7

    Free Android and Linux community BSP available at UDOO.org
    SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
    Yocto Guideline valid for SECO BSP
    Linux

    Linux
    Yocto
    Android

    Linux
    Yocto
    Android

    Temperatura de funcionamiento

    0°C ÷ +70°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)**
    For industrial temp. (-40°C ÷ +85°C)** please contact us

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C (Industrial version, without WiF+BT optional module)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C (Industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensiones
    70x70 mm (2.76” x 2.76”)
    110 x 86.5 mm (4.5” x 3.7”)
    70x70 mm (2.76” x 2.76”)
    70x70 mm (2.76” x 2.76”)
    Seguridad
    ...
    ...
    ...
    ...
    BIOS
    ...
    ...
    ...
    ...
    Funcionalidades del controlador integrado
    ...
    ...
    ...
    ...
    CAN Bus
    ...
    ...
    ...
    ...
    Functional Safety Features
    ...
    ...
    ...
    ...

    Descripción

    Details

    Q7-928 is a Qseven® Rel. 2.0 Compliant Module designed by SECO that offers top computational and graphical performances given by low-power consuming ARM architecture.
    The board integrates i.MX6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex® A9 ARM Core (up to Quad Core processors), ideal for applications requiring multimedia capabilities and/or high levels of parallel computing.
    Información adicional

    Additional Information

    Procesador
    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6DP DualPlus - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core
    Máx. núcleos
    4
    Memoria
    Up to 4GB DDR3L on-board (up to 2GB with i.MX6S)
    Gráficos

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES 2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D, i.MX6DP and i.MX6Q)
    Enhanced 2D and 3D graphics with i.MX6DP
    Supports up to 3 independent displays with i.MX6D, i.MX6DPand i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Interfaces vídeo

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4
    Video Input Port / Camera Connector

    Resolución de vídeo

    LVDS, up to 1920x1200
    HDMI, up to 1080p

    Almacenamiento en masa

    On-board eMMC drive, up to 32 GB
    SD / MMC / SDIO interface
    1 x μSD Card Slot on-board
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)

    Rojo
    Gigabit Ethernet interface
    USB

    1 x USB OTG interface
    4 x USB 2.0 Host interfaces

    PCI-e
    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
    Audio
    AC'97 Audio Interface
    I2S
    Puertos en serie

    2 x serial ports (TTL interface)
    CAN port interface

    Otras interfaces

    I2C Bus
    LPC Bus
    SM Bus
    Power Management Signals

    Alimentación

    +5VDC ± 5%

    Sistema operativo

    Linux
    Yocto
    Microsoft® Windows Embedded Compact 7

    Temperatura de funcionamiento

    0°C ÷ +70°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensiones
    70x70 mm (2.76” x 2.76”)
    Software
    SECO WIKI
    Linux
    • SECO BSP*
    Linux-YOCTO
    • Yocto meta SECO BSP release Guideline*

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Documentos

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Q7-928

    Q7-928
    • EVALUACIÓN DE NUESTROS PRODUCTOS

      Máx. 3 unidades por referencia de producto
    • PRECIO DE MUESTRAS

      Incluidos gastos de nvío
    • PARA EMPRESAS ÚNICAMENTE

      Apoyo técnico exclusivo para empresas
    Qseven® standard module with NXP i.MX6 Processor
    número de pieza sku descripción número de pieza configuración número de pieza compra muestras en línea contacto comparar
    Q928-Q3C0-BBB0-I1 Q7 - NXP i.MX6 DualLite @800MHz (w/ GPU, VPU) Q7 - NXP i.MX6 DualLite @800MHz (w/ GPU, VPU) - 1GB DDR3L Single Channel, 4GB eMMC, microSD slot, CSI Camera connector, RTC Ultra Low Power 4GB LPC interface - Industrial temp. Range Añadir para comparar
    Q928-M1C0-BBB0-I1 Qseven NXP i.MX6S i.MX6 Solo @800MHz, 512MB RAM, eMMC 4GB, microSD, Video Input Port, RTC low power, LPC interface (industrial temp.) Añadir para comparar

    • Automatización industrial
    • Automatización/Domótica de edificios
    • Instrumentos de medida
    • IoT
    • Transporte
    Top