Q7-C26

Qseven® Rel. 2.1 compliant module with NXP i.MX 8 Applications Processors

Product status

Development
Sampling
Production
Available in Industrial Temperature Range

Contact us for more information and quotes

CPU

NXP i.MX 8 Applications Processors

Graphics

Integrated GPU, supports 2 independent displays

Connectivity

1x USB 3.0; PCI-e x1 Gen3; CSI camera connector; Boot select signal

Memory

soldered down LPDDR4-3200 memory

Product details

Technical Info

  • Description
    The Q7-C26 is a Qseven® Rel. 2.1 compliant module based on the NXP i.MX 8 Applications Processors. This solution features rich m2m interface to control onboard subsystems and wide connectivity, taking advantage of the wide scalability offered by Qseven® form factor and the i.MX 8 family.
  • Processor

    NXP i.MX 8 Family:
     i.MX 8QuadMax - 2x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores
     i.MX 8QuadPlus - 1x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x Cortex®-M4F cores

  • Memory

    soldered down LPDDR4-3200 memory, 64-bit interface

  • Graphics

    Integrated Graphics Processing Unit, supports 2 independent displays.
    Embedded VPU, supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-2, VC-1, RV9, VP8, H.263 and MPEG4 part, HW encoding of AVC/H.264
    Supports OpenGL ES 3.1, Open CL 1.2, OpenGL 3.x, DirectX 11

  • Video Interfaces

    HDMI 2.0a / DP 1.3 or eDP 1.4 interface, supporting HDCP 2.2
    Dual Channel or 2 x Single Channel 18- / 24-bit LVDS interface (1 x Single Channel in case of eDP interface available)

  • Video Resolution

    HDMI / DP / eDP resolution up to 4096x2160 @ 60Hz
    LVDS resolution up to 1920x1080 @ 60Hz

  • Mass Storage

    1x SATA Gen3 interface
    eMMC 5.1 drive soldered on-board
    SD 4-bit interface
    QSPI Flash soldered-on-board

  • Networking

    1 x Gigabit Ethernet interface

  • USB

    4 x USB 2.0 Host Ports 
    1 x USB 3.0 Host Port
    1 x USB 2.0 OTG port

  • PCI-e

    2x PCI-e x1 Gen3 ports

  • Audio

    I2S Audio Interface

  • Serial Ports

    1x UART Tx/Rx/RTS/CTS
    1x CAN Bus (TTL level)

  • Other Interfaces

    CSI camera connector
    2x I2C Bus
    SPI interface
    8 x GPI/Os
    Boot select signal
    Power Management Signals
    Watchdog

  • Power Supply

    +5VDC ± 5%
    +3.3V_RTC

  • Operating System

    Linux
    Yocto
    Android

  • Operating Temperature

    0°C ÷ +60°C (Commercial version)
    -40°C ÷ +85°C (Industrial version)

     

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

  • Dimensions
    70x70 mm (2.76” x 2.76”)

Part Number

  • EC26-7331-1111-I0

    Part number description
    Q7-C26 W/NXP i.MX 8 Quad Max 1.6GHz (VPU + GPU), LPDDR4 8 GB, eMMC 16 GB, LVDS + HDMI/DP, HUB USB, Video In, PCle, Gigabit Eth - Industrial Range
    Contact us for more informations or quotes
    CONTÁCTENOS

Related Products

CQ7-A42
Qseven® rel. 2.0 Compliant Evaluation Carrier Board on 3.5” Form factor
Production
View Product
Q7 DEV KIT 2.0
Cross Platform Development Kit for Qseven® philosophy, compatible with both x86 and Arm Rev. 2.0 Qseven® modules
Production
View Product
Q7 STARTER KIT 2.0
Cross Platform Starter Kit compatible with both x86 and Arm Rev. 2.0 Qseven® modules: a complete package including the basic components necessary to start developing
Production
View Product
QC26-DISS-1-PK
Q7 HEAT SPREADER: Q7-C26 Heat Spreader (PASSIVE)
Production
View Product
QC26-DISS-2-PK
Q7 HEAT SINK: Q7-C26 Heat Sink (PASSIVE) Packaged
Production
View Product
QC26-DISS-3-PK
Q7 HEAT SINK: Q7-C26 Heat Sink (ACTIVE) Packaged
Production
View Product