CQ7-A42

Qseven® rel. 2.0 Compliant Evaluation Carrier Board on 3.5” Form factor

Product status

Development
Sampling
Production
Available in Industrial Temperature Range

Contact us for more information and quotes

Product details

Technical Info

  • Description
    The Qseven® Carrier Board CQ7-A42 is a full featured carrier board for Qseven® Rel. 2.0 compliant CPU modules, in 3.5” form factor. This carrier board can be used with any Qseven® Rel. 2.0 compliant module without incompatibilities and/or loss of functionalities. The board has been specifically designed for taking advantage of all possible features that can be offered by x86 and/or ARM architectures on Qseven® modules. SECOCQ7-3.5 has been developed most of all as a development board to explore the possibilities offered by Qseven® modules, but it could also be a good solution for low volumes production for companies that do not want or need to develop customised carrier board.
  • Video Interfaces

    LVDS Dual Channel 24-bit + backlight connectors or 2xeDP Connectors

    DP++ or HDMI Connector

  • Mass Storage

    1 x S-ATA with HDD Power connector
    1 x mSATA Slot
    microSD Slot on combo microSD + SIM connector

  • Networking

    Up to 2 x Gigabit Ethernet connectors

  • USB

    1 x USB 3.0 Host port on Type-A socket
    2 x USB 2.0 Host ports on double Type-A sockets
    2 x USB 2.0 Host ports on internal pin header
    1 x USB 2.0 OTG ports on micro-AB socket (USB Port shared with miniPCI-e slot)

  • PCI-e

    miniPCI-e slot Full/Half size, combined with SIM card slot

  • Audio

    Audio interface on internal pin header

  • Serial Ports

    4-wires RS-232/RS-422/RS-485 configurable serial port on DB9 male connector

    2 x RS-232 Full-modem serial ports on internal header (needs LPC interface from Qseven module)

    CAN interface on PCB terminal block

  • Other Interfaces

    SPI internal pin header

    LPC Bus internal pin header

    SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header

    Front Panel Header

    1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management)

    +12V Tachometric FAN connector

    Optional Debug USB port on mini-B Socket

    Optional MFG connector for JTAG programming of Qseven® module

  • Power Supply

    +12VDC Mini-fit Standard ATX power connector
    Coin cell battery Holder for CMOS and RTC

  • Operating Temperature

    -40°C ÷ +85°C (industrial range)

     

    *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.

  • Dimensions
    146 x 102 mm (5,75” x 4,02”)

Part Number

  • QA42-0000-1111-I0

    Part number description
    Carrier Board for Qseven® rel. 2.0 Compliant modules on 3.5” Form factor - DP and LVDS connectors, 2nd Ethernet Port, w/ Debug USB mini-B Port - Industrial temp. Range
    Contact us for more informations or quotes
    CONTACT US
  • QA42-0000-2111-I0

    Part number description
    Carrier Board for Qseven® rel. 2.0 Compliant modules on 3.5” Form factor - HDMI - 2nd Ethernet Port - LVDS - Debug Port - Industrial temp. Range
    Contact us for more informations or quotes
    CONTACT US

Related Products

μQ7-C72
μQseven® standard module with NXP i.MX 8M Mini & NXP i.MX 8M Nano Processors
Development
View Product
μQ7-A75-J
μQseven® standard module with NXP i.MX 6 Processor
Production
View Product
μQ7-A76-J
μQseven Rev. 2.0 Compliant Module with the Intel® Atom™ E3800 and Celeron® families (formerly Bay Trail)
Production
View Product
Q7-C25
Qseven® Rel. 2.1 compliant module with NXP i.MX 8M Applications Processors
Sampling
View Product
Q7-C26
Qseven® Rel. 2.1 compliant module with NXP i.MX 8 Applications Processors
Sampling
View Product
Q7-A36
Qseven® Rev. 2.0 based on Intel® Atom™ E3800 and Celeron® families SoC, cost-effective and mobile-oriented version with eMMC and Camera Interface
Production
View Product
[Picture]Q7-974_front
Q7-974
Qseven® Rel. 2.0 Compliant Module with the Intel® Atom™ E3800 and Celeron® families (formerly Bay Trail)
Production
View Product
Q7-B03
Qseven® Rel. 2.1 compliant module with the Intel® Atom X Series, Intel® Celeron® J / N Series and Intel® Pentium® N Series (formerly Apollo Lake) Processors
Production
View Product
[Picture] μQ7-962_front
μQ7-962
μQseven® standard module with NXP i.MX 6 Processor
Production
View Product
[Picture] Q7-928_front
Q7-928
Qseven® standard module with NXP i.MX 6 Processor
Production
View Product
[Picture] Q7-963_front
Q7-963
Certified Industrial temperature range Qseven® Rel. 1.20 Compliant Module with Intel® Atom™ E6xxT series CPU + EG20T Chipset
Production
View Product
[Picture] Q7-922_front
Q7-922
Computer on Module with NVIDIA® Tegra® T30 Processor
Production
View Product
[Picture] Q7-881_front
Q7-881
Computer on Module with Intel® Atom™ E6xx series CPU+ EG20T Chipset
Production
View Product
[Picture] Q7-796_front
Q7-796
Computer on Module based on the Texas Instruments® OMAP™ 37xx Family
Production
View Product
PWK-009
Power supply kit: Power brick (60W, 12V 5A) w/ adapter cable for QA42 and SA44 and Power cord w/ adapters (EU;US;JPN etc.)
Production
View Product
PWK-003/QA42
Power supply kit: Power brick (EA1050A(M03) 60W, 12V 5A) + Power cord (CV-AL006) + adapters (EU;US;JPN etc.)
Production
View Product
CABKITA42
This accessories kit includes the following items: LVDS cable for QA42 (L=50cm) (Connector: JST PHDR-24VS or alternative => open ended) - RoHS 2x USB type ""A"" cable with frame (pin 10 plugged) - L = 30 cm SATA cable: 15P (SATA) to Molex 4P (2.0mm), length 100 mm Power adapter cable w/ 39-01-2040 connector, open ended, L= 20 cm Serial cable, 2 x 5p IDC connector to DB9 male connector, L=20 cm
Production
View Product
VA74-0000-0000-I0
I2S Audio module (VA74-0000-0000-I0) for QA42
Production
View Product
VA67-0000-0000-I0
HD Audio Module (VA67-0000-0000-I0) for QA42
Production
View Product
VA13
USB-to-Serial port converter modules
Production
View Product
ASK-425
Adapter for mounting a microQ7 module on standard Qseven carrier boards
Production
View Product