Benvenuti nel sito SECO S.p.A.

×

Registrierung

Account-Informationen

  • Login-Daten

    oder login

    Vorname obbligatorisch!
    Nachname obbligatorisch!
    Steuernummer obbligatorisch
    Firmenname obbligatorisch!
    Mehrwertsteuernummer obbligatorisch!
    Land obbligatorisch!
    Vorname nicht gültig!
    Nachname nicht gültig!
    Das ist keine E-Mailadresse!
    E-Mailadresse obbligatorisch!
    Diese E-Mailadresse existiert schon!
    Password obbligatorisch!
    Geben Sie ein gültiges Password ein!
    Geben Sie 6 oder mehr Schriftzeichen ein!
    Geben Sie mindestens 16 Schriftzeichen ein!
    Password stimmen nicht überein!
    Allgemeinen Geschäftsbedingungen sind obligatorisch!
    E-Mail oder Password sind nicht korrekt!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleasehier klicken

    Mehr Ansichten

    SYS-B08-7

    Embedded Panel with 7” LCD display based on the NXP i.MX 6SoloX Processor

    • NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
    • up to 2x Fast Eth; optional WiFi + BT LE
    • Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    • 32-bit DDR3L memory soldered on-board, up to 1GB

      SYS-B08-7

    SYS-B08-7

    μQ7-A75-J

    μQ7-A75-J

    Q7-928

    Q7-928

    SBC-A62-J

    SBC-A62-J

     
    Entwicklungsstatus des Produkts
    Prozessor
    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors

    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6DP DualPlus - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core

    NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
    SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
    SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
    SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
    SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

    Chipsatz
    ...
    ...
    ...
    ...
    Max Cores
    1 + 1
    2
    4
    4
    Max Thread
    ...
    ...
    0
    0
    Speicher

    Soldered on-board DDR3L memory, 32-bit interface
    SYS-B08-BASIC/D: 512MB
    SYS-B08-FULL/D: 1GB

    Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F

    Up to 4GB DDR3L on-board (up to 2GB with i.MX6S)

    Soldered on-board DDR3L memory***:
    SBC-A62-J-SOLO: 512MB 32-bit interface
    SBC-A62-J-LITE: 1GB 64-bit interface
    SBC-A62-J-PLUS: 2GB 64-bit interface
    SBC-A62-J-QUAD: 1GB 64-bit interface

    *** For additional configurability please contact SECO

    Grafik

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Supports 2 independent displays

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES 2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D, i.MX6DP and i.MX6Q)
    Enhanced 2D and 3D graphics with i.MX6DP
    Supports up to 3 independent displays with i.MX6D, i.MX6DPand i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
    OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
    SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

    Videoschnittstellen

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4
    Video Input Port / Camera Connector

    1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
    HDMI interface 1.4

    Videoauflösung

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    LVDS, resolution up to 1920x1200
    HDMI, resolution up to 1080p

    LVDS, up to 1920x1200
    HDMI, up to 1080p

    HDMI: up to 1920 x 1080p
    LVDS: up to 1920 x 1200

    Massenspeicher

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    On-board eMMC drive, up to 8 GB
    SD / MMC / SDIO interface
    Internal SPI Flash for booting

    On-board eMMC drive, up to 32 GB
    SD / MMC / SDIO interface
    1 x μSD Card Slot on-board
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)

    4GB eMMC drive soldered onboard***
    microSD Card slot
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

    *** For additional configurability please contact SECO

    Networking

    SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector
    SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard

    Fast Ethernet (10/100) interface
    Gigabit Ethernet interface

    Gigabit Ethernet connector
    Internal USB connector for Wi-Fi Module

    USB
    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header

    1 x USB OTG interface
    1 x USB 2.0 Host interface

    1 x USB OTG interface
    4 x USB 2.0 Host interfaces

    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port
    PCI-e
    ...

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
    ...
    Audio
    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header
    I2S / AC’97 Audio Interface
    AC'97 Audio Interface
    I2S

    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
    AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

    Serielle Anschlüsse

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    ...

    2 x serial ports (TTL interface)
    CAN port interface

    Debug UART interface, TTL voltage level.
    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
    Other serial interfaces on the expansion connector:
    SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
    SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

    Andere Schnittstellen

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
    - Additional SD interface
    - Up to 4 UARTs
    - CAN interface
    - Watchdog(s)
    - I2C interfaces
    - PWM outputs
    - SPI interface
    - Additional Audio interface

    (*) not all the combinations are allowed simultaneously Power Management Signals

    I2C Bus
    LPC Bus
    SM Bus
    Power Management Signals

    Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
    Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

    * Please note that some of these interfaces are factory options, other configurations are made via SW.

    Stromversorgung

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    +5VDC ± 5%
    Optional Low Power RTC

    +5VDC ± 5%

    +12VDC; Additional embedded Low Power RTC;
    SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

    Energieverbrauch
    ...
    ...
    ...
    ...
    Betriebssystem

    Linux
    Yocto

    Linux
    Yocto

    Linux
    Yocto
    Microsoft® Windows Embedded Compact 7

    Free Android and Linux community BSP available at UDOO.org
    SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
    Yocto Guideline valid for SECO BSP
    Linux

    Betriebstemperatur

    0°C ÷ +60°C (Commercial version)

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (Industrial temp.)* 

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C ÷ +70°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)**
    For industrial temp. (-40°C ÷ +85°C)** please contact us

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensionen
    189.60 x 121.40 x 28.20 mm
    40x70 mm (1.57” x 2.76”)
    70x70 mm (2.76” x 2.76”)
    110 x 86.5 mm (4.5” x 3.7”)
    Security
    ...
    ...
    ...
    ...
    BIOS
    ...
    ...
    ...
    ...
    Embedded Controller Functionalities
    ...
    ...
    ...
    ...

    Beschreibung

    Details

    The SYS-B08-7 is an Embedded Panel with 7” LCD display based on the NXP i.MX 6SoloX Processor. This smart, compact, industrial touch system features a 7” capacitive full-flat multi-touch screen, perfect for IoT. Thanks to the lightweight and easy installation with integrated HW accelerator, this solution is suitable for 24-hr digital signage usage. The SYS-B08-7 low power consumption and fanless system is connectivity-oriented and has Linux ready for quick system deployment. It is ideal for Industrial Automation, Industrial Internet of Things (IIoT), Digital Signage and HMI applications.
    Zusatzinformation

    Zusatzinformation

    Prozessor
    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
    Max Cores
    1 + 1
    Speicher

    Soldered on-board DDR3L memory, 32-bit interface
    SYS-B08-BASIC/D: 512MB
    SYS-B08-FULL/D: 1GB

    Grafik

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Videoschnittstellen

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    Videoauflösung

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    Videoschnittstellen
    SINGLE CHANNEL LVDS
    Massenspeicher

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    Networking

    SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector
    SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard

    USB
    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header
    Audio
    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header
    Serielle Anschlüsse

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    Andere Schnittstellen

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    Stromversorgung

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    Betriebssystem

    Linux
    Yocto

    Betriebstemperatur

    0°C ÷ +60°C (Commercial version)

    Dimensionen
    189.60 x 121.40 x 28.20 mm
    Software

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Dokumente

    * User need to register to site before download reserved files. Please login if you are a registered user.

    SYS-B08-7

    SYS-B08-7
    • BEWERTEN SIE UNSERE PRODUKTE

      Max. 3 Stück pro Artikelnummer
    • MUSTERPREISE

      Einschließlich Versandkosten
    • AUSSCHLIEßLICH FIRMENKUNDENGESCHÄFT

      Technische Unterstützung wir nur Firmenkunden gewährt
    Embedded Panel with 7” LCD display based on the NXP i.MX 6SoloX Processor
    Sku Artikelnummer Beschreibung Artikelnummer Konfiguration Artikelnummer Kaufen Sie Muster online Kontaktieren Sie uns Vergleich
    SYS-B08-7/BD SBC-B08-7, Basic version: 7" touch display, NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 512MB RAM - 1x FastETH - RTC LP - RS-485 - RS-232 - CAN - Comm. Temp. w/Heatsink Embedded Panel with 7” LCD display based on the NXP i.MX6 SoloX Processor Auf die Vergleichsliste
    SYS-B08-7/FD SBC-B08-7 Full Version: 7" touch display, NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 1GB RAM - 8GB eMMC - 2x FastETH - Wi-Fi/BLE - RTC LP - RS-485 - RS-232 - CAN - Comm. Temp. w/ Heatsink Embedded Panel with 7” LCD display based on the NXP i.MX6 SoloX Processor Auf die Vergleichsliste

    • Devices
    • Gebäudetechnik /Home Automation
    • Industrielle Automatisierung
    • Infotainment/Vending
    • IoT
    Top