Benvenuti nel sito SECO S.p.A.

×

Registrierung

Account-Informationen

  • Login-Daten

    oder login

    Vorname obbligatorisch!
    Nachname obbligatorisch!
    Steuernummer obbligatorisch
    Firmenname obbligatorisch!
    Mehrwertsteuernummer obbligatorisch!
    Land obbligatorisch!
    Vorname nicht gültig!
    Nachname nicht gültig!
    Das ist keine E-Mailadresse!
    E-Mailadresse obbligatorisch!
    Diese E-Mailadresse existiert schon!
    Password obbligatorisch!
    Geben Sie ein gültiges Password ein!
    Geben Sie 6 oder mehr Schriftzeichen ein!
    Geben Sie mindestens 16 Schriftzeichen ein!
    Password stimmen nicht überein!
    Allgemeinen Geschäftsbedingungen sind obligatorisch!
    E-Mail oder Password sind nicht korrekt!
    Account confirmation is required. Please, check your email for the confirmation link. To resend the confirmation email pleasehier klicken

    Q7-928

    Qseven® standard module with NXP i.MX 6 Processor

    • Single-, Dual- and Quad- Core (ARM® Cortex® -A9 Cores)
    • 2x serial ports; CAN port
    • 2D/3D dedicated graphics processors
    • up to 4GB DDR3L on-board
    Verfügbar im industriellen Temperaturbereich

      Q7-928

    Q7-928

    SBC-B08

    SBC-B08

    SBC-A62-J

    SBC-A62-J

    μQ7-A75-J

    μQ7-A75-J

     
    Entwicklungsstatus des Produkts
    Prozessor
    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6DP DualPlus - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core
    NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz

    NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
    SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
    SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
    SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
    SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors

    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core

    Chipsatz
    ...
    ...
    ...
    ...
    Max Cores
    4
    1 + 1
    4
    2
    Max Thread
    0
    ...
    0
    ...
    Speicher
    Up to 4GB DDR3L on-board (up to 2GB with i.MX6S)

    Soldered on-board DDR3L memory, 32-bit interface
    SYS-B08-BASIC/D: 512MB
    SYS-B08-FULL/D: 1GB

    Soldered on-board DDR3L memory***:
    SBC-A62-J-SOLO: 512MB 32-bit interface
    SBC-A62-J-LITE: 1GB 64-bit interface
    SBC-A62-J-PLUS: 2GB 64-bit interface
    SBC-A62-J-QUAD: 1GB 64-bit interface

    *** For additional configurability please contact SECO

    Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F

    Grafik

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES 2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D, i.MX6DP and i.MX6Q)
    Enhanced 2D and 3D graphics with i.MX6DP
    Supports up to 3 independent displays with i.MX6D, i.MX6DPand i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
    OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

    Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
    OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
    HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
    HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
    SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
    SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
    Supports 2 independent displays

    Videoschnittstellen

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4
    Video Input Port / Camera Connector

    Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
    24-bit Parallel RGB Connector

    1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
    HDMI interface 1.4

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface

    Videoauflösung

    LVDS, up to 1920x1200
    HDMI, up to 1080p

    LVDS: up to 1366x768 @60Hz, 24bpp
    RGB: up to 1920x1080p @60Hz, 24bpp

    HDMI: up to 1920 x 1080p
    LVDS: up to 1920 x 1200

    LVDS, resolution up to 1920x1200
    HDMI, resolution up to 1080p

    Massenspeicher

    On-board eMMC drive, up to 32 GB
    SD / MMC / SDIO interface
    1 x μSD Card Slot on-board
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)

    16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
    SYS-B08-FULL/D: 8GB eMMC soldered onboard

    4GB eMMC drive soldered onboard***
    microSD Card slot
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

    *** For additional configurability please contact SECO

    On-board eMMC drive, up to 8 GB
    SD / MMC / SDIO interface
    Internal SPI Flash for booting

    Networking
    Gigabit Ethernet interface

    SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector
    SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard

    Gigabit Ethernet connector
    Internal USB connector for Wi-Fi Module

    Fast Ethernet (10/100) interface
    USB

    1 x USB OTG interface
    4 x USB 2.0 Host interfaces

    1 x USB 2.0 OTG port
    3 x USB 2.0 Host ports on standard Type-A socket
    1 x USB 2.0 Host port on internal pin header
    2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
    USB micro-B Client port

    1 x USB OTG interface
    1 x USB 2.0 Host interface

    PCI-e
    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
    ...
    ...

    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

    Audio
    AC'97 Audio Interface
    I2S
    I2S Audio interface on programmable pin header
    S / PDIF interface (In and Out) on programmable pin header

    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
    AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

    I2S / AC’97 Audio Interface
    Serielle Anschlüsse

    2 x serial ports (TTL interface)
    CAN port interface

    1 x CAN Port reconfigurable as GPIO
    2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

    Debug UART interface, TTL voltage level.
    SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
    Other serial interfaces on the expansion connector:
    SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
    SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

    ...
    Andere Schnittstellen

    I2C Bus
    LPC Bus
    SM Bus
    Power Management Signals

    2 x I2C dedicated connectors (one reserved for Touch Screen)
    6 analog inputs for A/D Conversion
    Programmable (*) expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 x PWM
    • 3 x I2C
    • 3 x serial ports (2x RS-232 +1xRS-485 interface)
    Embedded Low Power RTC
    (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

    Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

    Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
    Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

    * Please note that some of these interfaces are factory options, other configurations are made via SW.

    On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
    - Additional SD interface
    - Up to 4 UARTs
    - CAN interface
    - Watchdog(s)
    - I2C interfaces
    - PWM outputs
    - SPI interface
    - Additional Audio interface

    (*) not all the combinations are allowed simultaneously Power Management Signals

    Stromversorgung

    +5VDC ± 5%

    +12VDC nominal voltage
    +3VDC cabled Coin Cell Battery

    +12VDC; Additional embedded Low Power RTC;
    SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
    SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

    +5VDC ± 5%
    Optional Low Power RTC

    Energieverbrauch
    ...
    ...
    ...
    ...
    Betriebssystem

    Linux
    Yocto
    Microsoft® Windows Embedded Compact 7

    Linux
    Yocto

    Free Android and Linux community BSP available at UDOO.org
    SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
    Yocto Guideline valid for SECO BSP
    Linux

    Linux
    Yocto

    Betriebstemperatur

    0°C ÷ +70°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)**
    For industrial temp. (-40°C ÷ +85°C)** please contact us

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    0°C  ÷ +60 °C (commercial temp.)*
    -40°C ÷ +85°C (Industrial temp.)* 

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensionen
    70x70 mm (2.76” x 2.76”)
    89.5 x 87 mm (3.52” x 3.43”)
    110 x 86.5 mm (4.5” x 3.7”)
    40x70 mm (1.57” x 2.76”)
    Security
    ...
    ...
    ...
    ...
    BIOS
    ...
    ...
    ...
    ...
    Embedded Controller Functionalities
    ...
    ...
    ...
    ...

    Beschreibung

    Details

    Q7-928 is a Qseven® Rel. 2.0 Compliant Module designed by SECO that offers top computational and graphical performances given by low-power consuming ARM architecture.
    The board integrates i.MX6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex® A9 ARM Core (up to Quad Core processors), ideal for applications requiring multimedia capabilities and/or high levels of parallel computing.
    Zusatzinformation

    Zusatzinformation

    Prozessor
    NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors
    - i.MX6S Solo - Single core up to 1GHz
    - i.MX6DL Dual Lite - Dual core up to 1GHz per core
    - i.MX6D Dual - Dual core up to 1GHz per core
    - i.MX6DP DualPlus - Dual core up to 1GHz per core
    - i.MX6Q Quad - Quad core up to 1GHz per core
    Max Cores
    4
    Speicher
    Up to 4GB DDR3L on-board (up to 2GB with i.MX6S)
    Grafik

    Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator, supports OpenGL® ES 2.0 3D
    Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D, i.MX6DP and i.MX6Q)
    Enhanced 2D and 3D graphics with i.MX6DP
    Supports up to 3 independent displays with i.MX6D, i.MX6DPand i.MX6Q
    Supports 2 independent displays with i.MX6DL and i.MX6S

    Videoschnittstellen

    1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
    HDMI Interface 1.4
    Video Input Port / Camera Connector

    Videoauflösung

    LVDS, up to 1920x1200
    HDMI, up to 1080p

    Videoschnittstellen
    SINGLE CHANNEL LVDS, DUAL CHANNEL LVDS, HDMI
    Massenspeicher

    On-board eMMC drive, up to 32 GB
    SD / MMC / SDIO interface
    1 x μSD Card Slot on-board
    1 x External SATA Channel (only available with i.MX6D and i.MX6Q)

    Networking
    Gigabit Ethernet interface
    USB

    1 x USB OTG interface
    4 x USB 2.0 Host interfaces

    PCI-e
    1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
    Audio
    AC'97 Audio Interface
    I2S
    Serielle Anschlüsse

    2 x serial ports (TTL interface)
    CAN port interface

    Andere Schnittstellen

    I2C Bus
    LPC Bus
    SM Bus
    Power Management Signals

    Stromversorgung

    +5VDC ± 5%

    Betriebssystem

    Linux
    Yocto
    Microsoft® Windows Embedded Compact 7

    Betriebstemperatur

    0°C ÷ +70°C (commercial version)
    -40°C ÷ +85°C (industrial version)

    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

    Dimensionen
    70x70 mm (2.76” x 2.76”)
    Software
    SECO WIKI
    Linux
    • SECO BSP*
    Linux-YOCTO
    • Yocto meta SECO BSP release Guideline*

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Dokumente

    * User need to register to site before download reserved files. Please login if you are a registered user.

    Q7-928

    Q7-928
    • BEWERTEN SIE UNSERE PRODUKTE

      Max. 3 Stück pro Artikelnummer
    • MUSTERPREISE

      Einschließlich Versandkosten
    • AUSSCHLIEßLICH FIRMENKUNDENGESCHÄFT

      Technische Unterstützung wir nur Firmenkunden gewährt
    Qseven® standard module with NXP i.MX6 Processor
    Sku Artikelnummer Beschreibung Artikelnummer Konfiguration Artikelnummer Kaufen Sie Muster online Kontaktieren Sie uns Vergleich
    Q928-Q3C0-BBB0-I1 Q7 - NXP i.MX6 DualLite @800MHz (w/ GPU, VPU) Q7 - NXP i.MX6 DualLite @800MHz (w/ GPU, VPU) - 1GB DDR3L Single Channel, 4GB eMMC, microSD slot, CSI Camera connector, RTC Ultra Low Power 4GB LPC interface - Industrial temp. Range Auf die Vergleichsliste

    • Gebäudetechnik /Home Automation
    • Industrielle Automatisierung
    • IoT
    • Messgeräte
    • Transport- und Verkehrswesen
    Top