SBC-C61

SBC with the NXP i.MX 8M Mini Processors

Product status

Development
Sampling
Production

Contact us for more information and quotes

CPU

NXP i.MX 8M Mini Family

Graphics

GC320 2D accelerator + GCNanoUltra 3D accelerator

Connectivity

Up to 2x GbE; opt Wifi; up to 2x RS-232 or RS-485 or CAN; opt LTE Cat4 Modem with SIM slot or eSIM

Memory

Soldered on-board LPDDR4-3000 memory

Product details

Technical Info

  • Description
    3.5" SBC with the NXP i.MX 8M Mini Processors
  • Processor

    NXP i.MX 8M Mini Family based on ARM® Cortex®-A53 cores + general purpose Cortex®-M4 400MHz processor:


    i.MX 8M Mini Quad – Full featured, 4x Cortex®-A53 cores up to 1.8GHz
    i.MX 8M Mini Dual – Full featured, 2x Cortex®-A53 cores up to 1.8GHz
    i.MX 8M Mini Solo – Full featured, 1x Cortex®-A53 cores up to 1.8GHz
    i.MX 8M Mini Quad Lite – 4x Cortex®-A53 cores up to 1.8GHz, no VPU
    i.MX 8M Mini Dual Lite – 2x Cortex®-A53 cores up to 1.8GHz, no VPU
    i.MX 8M Mini Solo Lite – 1x Cortex®-A53 cores up to 1.8GHz, no VPU 

  • Max Cores
    4+1
  • Memory

    Soldered-down LPDDR4 memory, up to 4GB total, 32-bit interface

  • Graphics

    GC320 2D accelerator + GCNanoUltra 3D accelerator Embedded VPU (not for Lite processors), able to offer:
    VP9, HEVC/H.265, AVC/H.264, VP8 HW Decoding
    AVC/H.264, VP8 HW encoding


    OpenGL ES 2.0, OpenVG 1.1 support

  • Video Interfaces

    LVDS Single/Dual Channel connector or eDP connector (factory alternatives)
    MIPI-CSI Camera interface connector

  • Video Resolution

    Up to 1920x1080p60, 24bpp

  • Mass Storage

    2Kb I2C Flash
    MicroSD slot
    Optional internal SPI flash (shared with GPIOs and serial ports)
    QSPI Flash

  • Networking

    2x GbEthernet interfaces (1 optional)
    Optional WiFi 802.11 a/b/g/n/ac +BT LE 4.2 module
    Optional soldered on-board LTE Cat 4 Modem with SIM slot or eSIM

  • USB

    2x USB 2.0 Host ports on Type-A socket
    2x USB 2.0 Host ports on internal pin header
    1x USB OTG port on micro-AB connector (interface shared with the optional on-board modem)

  • Audio

    Digital Mic In connector (2x PDM inputs)
    Amplified mono Speaker Output

  • Serial Ports

    Up to 2x RS-232 or RS-485 or CAN Serial ports (factory options, shared with GPIOs and SPI interfaces)
    2x Debug UARTS

  • Other Interfaces

    I/O Connectors with:
    • 2xPWM @3.3V
    • GP I2C interface @3.3V
    • 1x Open Drain output (max 12V)
    • 2x GPIOs @3.3V 
    • 1xRS-232 or 1x RS-485 or 4x GPIOs / 1x UART or 1x CAN (factory options)
    • 1xRS-232 or 1x RS-485 or 4x GPIOs / 1x UART or 1x CAN + on-board ultra-low power RTC (factory options)
    Watchdog 
    Dedicated connector for I2C Touch Screen Controller Support 
    Optional Accelerometer + Magnetometer on-board 
    Onboard Buzzer 
    Optional Ultra Low Power RTC

  • Power Supply

    +12VDC÷ +24VDC

  • Operating System

    Wind River Linux
    Yocto
    Android

  • Operating Temperature

    -20°C ÷ +60°C (extended version)


    *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

  • Dimensions
    146x102 mm (3.5" form factor)

Software

Part Number

  • The ordering code for samples will be available soon.

    Part number description
    If you are interested in this product please contact us
    Contact us for more informations or quotes
    KONTAKTIEREN

Market applications