If you have an account with us, please log in.

* Required Fields



Single Board Computer with NXP i.MX 6SoloX Processor

Additional Information

Processor NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
Max Cores 1 + 1
Memory 32-bit DDR3L memory soldered on-board, up to 1GB
Graphics Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported
Video Interfaces Single Channel 18- / 24- bit LVDS connector + Touch Screen (I2C signals)
24-bit Parallel RGB Connector

Video Resolution LVDS: up to 1366x768 @ 60Hz, 24bpp
RGB: up to 1920x1080p @ 60Hz, 24bpp
Mass Storage 16MB NOR Quad-SPI Flash soldered on-board
eMMC soldered on-board, up to 8GB
μSD Card slot
Networking Up to two FastEthernet RJ-45 connectors
Optional WiFi (802.11 b / g / n) +BT LE combo module + antenna on-board
USB 1 x USB 2.0 OTG port
3 x USB 2.0 Host port on standard Type-A sockets
1 x USB 2.0 Host port on internal pin header
Audio I2S Audio interface on programmable pin header
S/PDIF interface (In and Out) on programmable pin header
Serial Ports

1 x CAN Port reconfigurable as GPIO
3 x UARTS on programmable pin header (optionally available with RS-232 or RS-485 interface)

Other Interfaces 2 x I2C dedicated connectors (one reserved for Touch Screen)
6 analog inputs for A / D Conversion
Programmable (*) expansion pin header connector, able to offer:
• CSI interface input (PAL and NTSC formats supported)
• Up to 26 GPIO
• SPI interface
• S/PDIF Audio interface
• I2S Audio interface
• CAN interface (TTL level)
• 3 x PWM
• 2 x I2C
• 3 x UARTs (TTL, RS-232 or RS-485 interface)
Optional additional embedded Low Power RTC
Optional 3-Axis Digital Gyroscope + 3D Accelerometer & Magnetometer

(*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.
Power Supply +12VDC nominal voltage
Operating System Android
Operating Temperature

0°C  ÷ +60 °C (commercial temp.)*
-40°C ÷ +85°C (industrial version)

*Measured at any point of the heatspreader/heatsink during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.

Dimensions 89.5 x 87 mm (3.52” x 3.43”)
DescriptionSBC-B08 is a new-generation all-in-one low-cost computer designed by SECO, equipped with a NXP i.MX 6SoloX applications processor able to run Android or Linux. SBC-B08 is a revolutionary product in terms of connectivity, interactivity with the real world and cost: a new concept of single board computer ready for Internet of Things applications and for the Post-PC era.

* User need to register to site before download reserved files. Please login if you are a registered user.

P/N Description Configuration
SB08-1100-2012-C0 SBC w/NXP i.MX6SX SoloX SBC-B08 w/ NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 512MB RAM - 1x FastETH - RTC LP - RS-485 - Comm. Temp.
SB08-1222-2212-C0 SBC w/NXP i.MX6SX SoloX SBC-B08 w/ NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 1GB RAM - 8GB eMMC - 2x FastETH - Wi-Fi/BLE - RTC LP - RS-485 - RS-232 - Comm. Temp.
Do you want to buy this product?


See also

view more

SECO S.p.A. Via Calamandrei, 91, 52100 Arezzo Italy - Phone +39 0575 26979 - Fax: +39 0575 350210 - P.IVA 00325250512
Reg. Imprese n. 4196 Arezzo - REA n. 70645 - Meccanografico AR007079

Images are for illustrative purposes only. Actual product may differ
- ©SECO 2014, All rights reserved.


Payment with major credit cards (through Paypal service)


This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. To learn more or change configurations, read our cookies policy