If you have an account with us, please log in.

* Required Fields



Single Board Computer with NXP i.MX6 Processor

Business-to-business onlySampling priceContact SECO

Additional Information

Processor NXP i.MX6 Family, based on ARM Cortex-A9 processors:
SBC-A62-J-SOLO: Single Core i.MX6S @ 1GHz
SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @ 1GHz
SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz
Max Cores 4
Memory Soldered on-board DDR3L memory***:
SBC-A62-J-SOLO: 512MB 32-bit interface
SBC-A62-J-LITE: 1GB 64-bit interface
SBC-A62-J-QUAD: 1GB 64-bit interface

*** For additional configurability please contact SECO
Graphics Integrated Graphics, with  HW accelerators for 2D and OpenGL® ES2.0 3D
Dedicated OpenVG™ accelerator (only SBC-A62-J-QUAD)
HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
SBC-A62-J-QUAD supports up to 3 independent displays
Video Interfaces 1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
HDMI 1.4 interface
Video Resolution LVDS, up to 1920x1200
HDMI, up to 1920x1080p
Mass Storage 4GB eMMC drive soldered onboard***
microSD Card slot
SBC-A62-J-QUAD: SATA connector

*** For additional configurability please contact SECO
Networking Gigabit Ethernet connector
Internal USB connector for Wi-Fi Module
USB 2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
USB micro-B Client port
Audio SBC-A62-J-LITE and SBC-A62-J-QUAD: AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks
Serial Ports Debug UART interface, TTL voltage level
SBC-A62-J-LITE and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
Other serial interfaces on the expansion connector:
SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 2 x CAN (TTL level)
SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level)
SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)
Other Interfaces Dedicated connector for external Touch Screen controller;
MIPI-CSI Camera connector;
Configurable* expansion connector with:
   Up to 28 GPIO
   SPI interface
   SPDIF Audio interface
   SDIO interface
   3 x PWM

* Please note that some of these interfaces are factory options, other configurations are made via SW.
Power Supply +12VDC
SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included
SBC-A62-J-QUAD: low power Real Time Clock with on-board battery
Operating System - Free Android and Linux community BSP available at UDOO.org
- SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
- Yocto Guideline valid for SECO BSP
Operating Temperature

0°C  ÷ +60 °C (commercial temp.)**
For industrial temp. (-40°C ÷ +85°C)** please contact us

**Measured at any point of the heatspreader/heatsink during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.

Dimensions 110 x 86.5 mm (4.5” x 3.7”)
DescriptionLow-end Single Board Computer with NXP i.MX6 Processor, that exploits the potential of a configurable expansion connector, to fully meet the configuration flexibility needs. Thanks to its features, the new Single Board with the i.MX6 is ideal for applications in digital signage, infotainment and in all general purpose contexts requiring multimedia capabilities, high performance and high levels of parallel computing for the reproduction of relevant and/or engaging contents.
  • Yocto meta SECO BSP release Guideline*
Windows Embedded Compact 7
  • Release Note for SECOSBC-A62-J WEC7/WEC2013 BSP*
  • Free community BSP available at udoo.org - SECO BSP on request*
  • Free community BSP available at udoo.org*
  • SECO BSP on request*

* User need to register to site before download reserved files. Please login if you are a registered user.

Data Sheet
  • i.MX6 BSP 5.0 WIKI*
  • [Manual] SBC-A62-J Rel. 2.1*
  • [Schematics] - SBC-A62-J Reference Schematics*

* User need to register to site before download reserved files. Please login if you are a registered user.

Business-to-business onlySampling priceContact SECO

P/N Description Configuration
SYS-A62-SOLO-CSCW SBC-A62-J-SOLO System SBC-A62-J System, SOLO version (CPU 1GHz i.MX6 Solo) w/Small Heatsink and Serial Debug kit, commercial temperature, w/Demo Linux BSP
SYS-A62-LITE-CSCW SBC-A62-J-LITE System SBC-A62-J System, LITE version (CPU 1GHz i.MX6 DualLIte) w/Small Heatsink and Serial Debug kit, commercial temperature, w/Demo Linux BSP
SYS-A62-QUAD-CLCW SBC-A62-J-QUAD System SBC-A62-J System, QUAD version (CPU 1GHz i.MX6Q Quad) w/Large Heatsink and Serial Debug kit, commercial temperature, w/Demo Linux BSP
Do you want to buy this product?


view more

See also

  • μQ7-A76-J

    μQseven Rev. 2.0 Compliant Module with the Intel® Atom™ E3800 and Celeron® families (“Bay Trail”)

view more

SECO s.r.l Via Calamandrei, 91 Arezzo Italy - Phone +39 0575 26979 - Fax: +39 0575 350210 - P.IVA 00325250512
Disclaimer - ©SECO 2014, All rights reserved.

Payment with major credit cards (through Paypal service)

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. To learn more or change configurations, read our cookies policy