If you have an account with us, please log in.

* Required Fields



μQseven® standard module with NXP i.MX6 Processor

Business-to-business onlySampling priceContact SECO

Additional Information

Processor NXP i.MX6 Family, based on ARM® CORTEX-A9 processors
- i.MX6S Solo - Single core up to 1GHz
- i.MX6DL Dual Lite - Dual core up to 1GHz per core
Max Cores 2

Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F


Dedicated 2D Hardware accelerator
Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
Supports 2 independent displays

Video Interfaces

1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
HDMI Interface

Video Resolution

LVDS, resolution up to 1920x1200
HDMI, resolution up to 1080p

Mass Storage

On-board eMMC drive, up to 8 GB
SD / MMC / SDIO interface
Internal SPI Flash for booting

Networking Fast Ethernet (10/100) interface

1 x USB OTG interface
1 x USB 2.0 Host interface


1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)

Audio I2S / AC’97 Audio Interface
Other Interfaces

On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities:
- Additional SD interface
- Up to 4 UARTs
- CAN interface
- Watchdog(s)
- I2C interfaces
- PWM outputs
- SPI interface
- Additional Audio interface

(*) not all the combinations are allowed simultaneously Power Management Signals

Power Supply

+5VDC ± 5%
Optional Low Power RTC

Operating System


Operating Temperature

0°C  ÷ +60 °C (commercial temp.)*
For industrial temp. (-40°C ÷ +85°C)* please contact us

*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

Dimensions 40x70 mm (1.57” x 2.76”)
DescriptionThe extremely low power and low cost μQseven Rev. 2.0 Compliant Module with the NXP i.MX6 Processor features all the processor and integrated native I/O capabilities of the SoC, in compliance with the Qseven standard, at the competitive cost of a proprietary module. This board is supplied with a complete and fully-featured BSP, for easy migration from, and to, the entire i.MX6 product family, along with dedicated hardware and software development support.
  • Visit the SECO WIKI for a walking through the board and its possibilities*
  • Yocto meta SECO BSP release Guideline*

* User need to register to site before download reserved files. Please login if you are a registered user.

* User need to register to site before download reserved files. Please login if you are a registered user.

Business-to-business onlySampling priceContact SECO

P/N Description Configuration
QA75-1110-1000-C0 µQseven i.MX6 Solo μQ7 w / i.MX6 Solo - RAM DDR3L 256MB single chip - eMMC 4GB - RTC Low Power - Comm.Temp
QA75-2310-1000-C0 µQseven i.MX6 DualLite μQ7 w / i.MX6 DualLite - RAM DDR3L 512MB dual chip - eMMC 4GB - RTC Low Power - Comm.Temp
QA75-2410-1000-C0 µQseven i.MX6 DualLite μQ7 w / i.MX6 DualLite - RAM DDR3L 1GB dual chip - eMMC 4GB - RTC Low Power - Comm.Temp
Do you want to buy this product?


  • CQ7-A42

    Qseven® rel. 2.0 Compliant Carrier Board on 3.5” Form factor

view more

See also

  • Q7-978

    Qseven® Rel. 2.0 Compliant Module with Intel® Atom™ Cedar View family Processors and Intel® NM10 Express Chipset

view more

SECO S.p.A. Via Calamandrei, 91, 52100 Arezzo Italy - Phone +39 0575 26979 - Fax: +39 0575 350210 - P.IVA 00325250512
Reg. Imprese n. 4196 Arezzo - REA n. 70645 - Meccanografico AR007079

Images are for illustrative purposes only. Actual product may differ
- ©SECO 2014, All rights reserved.


Payment with major credit cards (through Paypal service)


This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. To learn more or change configurations, read our cookies policy