If you have an account with us, please log in.

* Required Fields

Errore

SBC-B08

Single Board Computer with NXP i.MX 6SoloX Processor

Additional Information

Processor NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
Max Cores 1 + 1
Memory 32-bit DDR3L memory soldered on-board, up to 1GB
Graphics Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported
Video Interfaces Single Channel 18- / 24- bit LVDS connector + Touch Screen (I2C signals)
24-bit Parallel RGB Connector
Video ADC input (PAL and NTSC formats supported)
Video Resolution LVDS: up to 1366x768 @ 60Hz, 24bpp
RGB: up to 1920x1080p @ 60Hz, 24bpp

Mass Storage 16MB NOR Quad-SPI Flash soldered on-board
eMMC soldered on-board, up to 8GB
μSD Card slot
Networking Up to two FastEthernet RJ-45 connectors
WiFi (802.11 b / g / n) +BT LE combo module + antenna on-board
USB 1 x USB 2.0 OTG port
3 x USB 2.0 Host port on standard Type-A sockets
1 x USB 2.0 Host port on internal pin header
Audio I2S Audio interface on programmable pin header
S/PDIF interface (In and Out) on programmable pin header
Serial Ports 1 x CAN Port with CAN transceiver on dedicated connector, optional
1 x CAN Port reconfigurable as GPIO
3 x UARTS on programmable pin header (optionally available with RS-232 or RS-485 interface)
Other Interfaces 2 x I2C dedicated connectors (one reserved for Touch Screen)
6 analog inputs for A / D Conversion
Programmable (*) expansion pin header connector, able to offer:
• Up to 26 GPIO
• SPI interface
• S/PDIF Audio interface
• I2S Audio interface
• CAN interface (TTL level)
• 3 x PWM
• 2 x I2C
• 3 x UARTs (TTL, RS-232 or RS-485 interface)

(*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.
Power Supply +12VDC nominal voltage
Optional additional embedded Low Power RTC
Operating System Android
Linux
Operating Temperature

0°C  ÷ +60 °C (commercial temp.)*

*Measured at any point of the heatspreader/heatsink during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.

Dimensions 89.5 x 87 mm (3.52” x 3.43”)
DescriptionSBC-B08 is a new-generation all-in-one low-cost computer designed by SECO, equipped with a NXP i.MX 6SoloX applications processor able to run Android or Linux. SBC-B08 is a revolutionary product in terms of connectivity, interactivity with the real world and cost: a new concept of single board computer ready for Internet of Things applications and for the Post-PC era.

* User need to register to site before download reserved files. Please login if you are a registered user.

Do you want to buy this product?

See also

  • COMe-B09-BT6

    COM Express™ Basic Type 6 with Intel® 6th generation Core™ / Xeon® CPUs

    COMe-B09-BT6
view more


SECO s.r.l Via Calamandrei, 91 Arezzo Italy - Phone +39 0575 26979 - Fax: +39 0575 350210 - P.IVA 00325250512
Reg. Imprese n. 4196 Arezzo - REA n. 70645 - Meccanografico AR007079
Disclaimer - ©SECO 2014, All rights reserved.
  

Payment with major credit cards (through Paypal service)

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. To learn more or change configurations, read our cookies policy
OK