QuadMo747-X/T30

Computer on Module with NVIDIA® Tegra® T30 Processor

Additional Information

Processor

NVIDIA® Tegra® T30 w/ Quad ARM® CORTEX -A9
MPCore™ CPU, 1.3 GHz per core

Core Max 4
Memory up to 2GB DDR3L onboard
Graphics embedded NVIDIA® ULP GeForce® GPU
Integrated High Definition Audio-Video Processor
Video Interface LVDS Single/Dual Channel 18/24 Bit interface
HDMI 1.4a Interface
Video Resolution Up to 1080p on HDMI
Up to 1920 x 1080 on LVDS
Mass Storage eMMC, up to 32GB, soldered onboard
1 x S-ATA Channels
microSD Slot onboard
4 bit SD/MMC interface
Networking Gigabit Ethernet Interface
USB 6 x USB 2.0 ports
PCI-e

1 x PCI-e x4 lane, or 2 x PCI-e x2 lanes
(with support for 2 x PCI-e x 1 devices)

Audio HD Audio Interface
Serial Ports 2 serial ports (Tx, Rx signals)
CAN Bus Interface
Other Interfaces

I2C, SMBus, LPC, SPI
Video Input Port / Camera Connector
One Wire Interface
Thermal Cooling Interface
Power management signals

Power Supply

+5VDC AT/ATX mode

Operating System Linux
Operating Temperature

0°C ÷ +70°C (commercial version)
-20°C ÷ +70°C (extended version)

 

*Measured at any point of the heatspreader/heatsink during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.

Dimensions 70x70 mm (2.76” x 2.76”)
DescriptionQuadMo747-X/T30 is a Qseven® Rel. 1.20 Compliant Module designed by SECO that represents the top performance possibility for computational and graphical applications based on low power ARM architectures.
The board integrates Tegra® T30 High-Definition Mobile processor from NVIDIA®, a Quad-Core Cortex A9 CPU with frequencies up to 1.3GHz.
Linux 1.4
  • Linaro Compiler*
  • Kernel Linux 3.1.10*
  • File System Ubuntu 12.04 - Desktop version*
  • File System Ubuntu 12.04 - minimal version*
  • SECO Flash Bootargs*
  • SECO Tools*
  • U-Boot 2011.03*
  • md5sum.txt*

* User need to register to site before download reserved files. Please login if you are a registered user.

Application Notes
  • [APN] - Quadmo747-X-T30_Linux_Setup.pdf*
  • [APN] - errata pcie reset on qseven modules with t30.pdf*
Data Sheet
Image
Manual
  • [Rev B] - quadmo747_x_t30_manual_revb_rel_1_4.pdf*
  • [Rev C] - quadmo747_x_t30_revc_manual_rel_2_3.pdf*
  • Quadmo747-X-T30_Linux_BSP_release_notes.pdf*

* User need to register to site before download reserved files. Please login if you are a registered user.

P/N Description Configuration
Q922-1210-1000-C0 Qseven NVIDIA® Tegra® T30 Nvidia Tegra T30 @1,3GHz, 2GB RAM, eMMC 4GB, CAN Controller (commercial temp.)
Q922-1210-1000-E0 Qseven NVIDIA® Tegra® T30 Nvidia Tegra T30 @1,3GHz, 2GB RAM, eMMC 4GB, CAN Controller, (Extended temperature -20°C to 70°C)
Do you want to buy this product?

Accessories

  • B901 Mechanical Kit

    The boxed solution B901 supports the carrier board on Pico-ITX Form Factor and the following modules:

    • QuadMo747-GSeries

    • QuadMo747-X/i.MX6

    • QuadMo747-X/T30

    B901 Mechanical Kit
view more

See also

view more

SECO s.r.l Via Calamandrei, 91 Arezzo Italy - Phone +39 0575 26979 - Fax: +39 0575 350210 - P.IVA 00325250512
Disclaimer